- Browse all categories
- Best Picks by Swift Karting: The Essential Pit Tools
-
- Brake Bleeder Kit
- Brake Fittings & Ferrules
- Brake Fluid
-
Brake Hubs
- Brake Line
-
Brake Parts (M.C.P.)
-
Brake Rotors
- Caliper Brackets
- Enginetics Parts
- Euro Brake Pads
- Front Wheel Brakes
- Master Cylinder Caps, Billet
- Quarter Midget Brakes
- Rotor Guards
-
- Alfano Gauges & Accessories
- Hour Meter
-
Mychron Gauges
- Stopwatches
- Tach Bags
- Transponder Holders
-
-
Axle Bearings
- Axle Cassettes
-
Axles & Accessories
-
Bully Clutches
-
Chain
- Chain Breaker Tools
- Clutch Drivers
- Clutch Friction Discs
- Clutch Mounting Bolt Kits
- Clutch Spacers
-
Hilliard Clutches
- Honda GXH50 Kid Kart Clutch
-
Horstman Clutch Parts
- Lock Collars
-
Max-Torque Clutches
-
Nor-Am Clutches
-
Premier Clutches
- SMC Kart Clutches
- Sprocket Guards & Hardware
-
Sprocket Hubs
-
Sprockets
-
Viper Clutches
-
-
-
196cc Clone Engine & Parts
-
212cc Clone / Predator Engine & Parts
- 224cc Clone Engine & Parts
- Air Filters & Pre Filters (1.25")
-
Air Filters & Pre Filters (2-7/16")
- Big Block Clone Accessories
-
Briggs LO206 Engines & Parts (LO206)
- Briggs Quarter Midget Engine and Parts
- Briggs World Formula
- Camshafts
- Carb Cover (2-7/8")
- Carb Manifolds
- Catch Tanks
- Chain Guards & Hardware
- Exhaust Header Wrap
- Exhaust Silencers & Clamps
- Flywheel Screens
- Fuel Filters
- Fuel Line
- Fuel Pumps
-
Fuel Tanks
-
Gaskets (Fel-Pro)
- Honda GXH50 Kid Kart
-
Motor Mounts
-
Oil & Additives
- Pulse Fittings
-
Raptor (Flathead) Parts
- Spark Plug Index Washers
- Spark Plugs (2-Cycle & Honda Kid Kart)
- Throttle Cables & Hardware
- Tillotson Carbs
- Wiseco Pistons
-
- Track Wear, Kart Life Apparel
WMS
Individual WMS Clone Jet .034 (0.85mm) for Kart Engine Optimization
Individual WMS Clone Jet .034 (0.85mm) for Kart Engine Optimization
Couldn't load pickup availability
- 0.85mm size for moderate fuel enrichment
- Single jet for targeted GX200 tweaks
- Improves low-end pull in clones
Address specific tuning needs with this WMS .034 clone jet, ideal for one-off changes that enhance overall kart dynamics without bulk.
It supports richer settings for better torque, making starts more explosive. Availability note: WMS discontinued; receives high-quality RLV substitute. SKU: RLVDJ34.
Streamline your kit with this essential single, focusing on race-ready precision every time.
Frequently Asked Questions
Q: When should I use a .034 (0.85mm) jet in my clone engine?
A: The .034 jet is designed for moderate fuel enrichment. It is typically used when your engine is running slightly lean or when you need a boost in low-end torque and more explosive acceleration out of the corners.
Q: How do I know if I need to change my fuel jet?
A: You should consider a jet change if your engine is showing signs of a lean condition (such as overheating, popping, or hesitation under load) or if you are tuning for specific track conditions that require a richer fuel mixture.
Q: Is this jet compatible with my stock GX200 carburetor?
A: Yes, this jet is designed for standard clone engines like the GX200. It is a direct replacement for fine-tuning your fuel delivery.
Q: What is the difference between this jet and the RLV substitute?
A: WMS has discontinued their original line, so we provide high-quality RLV jets (SKU: RLVDJ34) that meet the exact specifications required for your clone engine, ensuring consistent performance and flow rates.
Q: Can I use this jet with the WMS Clone Jet Block?
A: Yes, this jet is designed to work seamlessly with standard clone carburetor setups, including the WMS Clone Jet Block base.
Related Products From Vendor
- Durable WMS Clone Jet Block Base for Custom Drilled Jet Setups
- Precision WMS Clone Engine Jet .039 Inch 0.99mm Single for Optimal Fuel Flow
- Efficient Single WMS Clone Jet .037 (0.94mm) for Kart Engine Balance
- Precision Single WMS Clone Jet .035 (0.89mm) for Kart Fuel Control
- WMS Engine Builder Clone Valve Springs Pair for Kart Racing
Share
