• Swift Karting 5000mAh 3S 11.1V LiPo battery with XT90 discharge connector and red leads for SmartyCam or MyChron data acquisition, 35C discharge rating on grey background
1 1

Swift Karting

Swift Karting 5000mAh 3S LiPo Battery for SmartyCam and Data Acquisition

Swift Karting 5000mAh 3S LiPo Battery for SmartyCam and Data Acquisition

$79.00 USD
$79.00 USD
Sale Sold out
Shipping calculated at checkout.

This 5000mAh 3S LiPo delivers an estimated 5–8 hours of continuous recording on the SmartyCam 4 Corsa on a single charge. At 11.1V nominal, it is a perfect voltage match for AiM data acquisition systems — plug straight into your MyChron 6 or SmartyCam power input with no step-down regulator needed. Super lightweight at 375g and small enough to tuck anywhere on the kart, it is the cleanest way to power a full data system for a full race weekend.

Pack Specifications

Capacity 5000mAh
Cell Count 3S (3 cells in series)
Nominal Voltage 11.1V
Constant Discharge 35C (175A continuous)
Peak Discharge 70C (350A burst)
Maximum Charge Rate 5C (25A max)
Dimensions 137.8 × 43 × 28.5mm
Weight 375g
Balance Charge Connector JST-XH
Discharge Connector XT90

Product Highlights

01Estimated 5–8 hours of continuous recording on the SmartyCam 4 Corsa on a single charge — enough for a full race weekend without mid-day recharging.
0211.1V nominal voltage is a direct match for AiM SmartyCam and MyChron data systems. No step-down regulator or voltage converter required.
035000mAh capacity: plenty of headroom for simultaneous HD video recording and GPS data logging without hunting for a charger between sessions.
0435C constant discharge rate (175A continuous, 350A peak) handles the combined power demands of the SmartyCam, MyChron, and any connected sensors without voltage sag.
05Weighs just 375g with a compact 137.8 × 43 × 28.5mm footprint — mount it under the seat, behind the fairing, or anywhere it fits and forget it’s there.
06XT90 discharge connector seats positively and locks under vibration, so it won’t work loose on a rough or bumpy track surface mid-race.
07JST-XH balance lead works with all standard multi-chemistry LiPo chargers for proper cell-balanced charging every time.
08Low internal resistance cells hold voltage flat across the discharge curve — no performance fade or frame drops on the SmartyCam late in the session.

Pair It With

This battery is built for AiM data systems. Make sure your setup is complete:

Also works great with the AiM external power harness — use the harness to route a single clean cable from this battery to the MyChron, SmartyCam, and any data hub in one run.

⚠️ LiPo Safety

Never leave batteries unattended while charging. To read more about charging and battery safety guidelines click here. Always charge in a fireproof bag on a non-flammable surface. Do not charge a damaged, swollen, or punctured cell. Store at 3.8V per cell (storage charge) when not in use.

Ready to power your SmartyCam 4 Corsa for the full weekend?

This pack is in stock and ships fast. Add it to your cart and you’re set — no extra cables, no regulators, no compromises.

View full details
Loading reviews...

Customer Reviews

Loading reviews...