MyChron 6 T2 Dual Temperature Gauge (TR/TC) Includes 30-Minute Remote Data Acquisition Session with Purchase

Limited-Time Data Acquisition Support Included with MyChron 6 T2 Purchase

For a limited time, each MyChron 6 T2 purchase includes a 30-minute remote data acquisition session. This session is designed to help drivers get properly set up and comfortable using their MyChron 6 with Race Studio 3.

As part of this promotion, customers also receive access to discounted remote data acquisition time at $65 per hour, reduced from the standard $95 per hour rate. This discounted rate is available only with this package and only until February 1st, 2025.

This promotional pricing is available for a limited time. Rates increase starting February 1st, and this promotion ends February 1st. Any data acquisition time purchased during the promotional period remains valid until used.

The included 30-minute session may be used for initial setup, sensor configuration, Race Studio 3 walkthroughs, reviewing existing data, or answering questions specific to your kart and engine combination. If you prefer something more advanced for your 30 minutes, that can be done as well. Additional sessions are subject to a one hour minimum, and longer sessions are recommended for more in-depth analysis.

Remote race weekend data acquisition is available but must be scheduled 5 to 7 days in advance to ensure availability.

---

Discover the advanced capabilities of the Mychron 6 T2 Dual Temperature Gauge, an essential tool for serious kart racers seeking precise engine monitoring and performance optimization. Designed specifically for the demands of high-speed karting, this gauge integrates seamlessly into your data acquisition system, providing real-time insights into critical temperature metrics, including cylinder head temperature (CHT).

The Mychron 6 T2 is configured using TR and TC patch cables, allowing racers to choose their preferred temperature sensor combination. Common setups include Water Temp or CHT paired with an EGT sensor. The included RPM wire with clip offers straightforward installation and accurate engine speed data.

The MyChron 6 T2 records data using internal accelerometer and gyro sensors combined with high-rate GPS sampling. Proper delta setup is critical, as delta time allows drivers to see gains and losses corner by corner in real time, making it one of the most powerful driver improvement tools available.

Built with durability in mind, the Mychron 6 T2 features a robust, weather-resistant housing and a high-resolution backlit display for clear visibility in all lighting conditions.

Key features include:

• Dual temperature inputs using TR and TC patch cables
• User-selectable temperature sensor combinations including Water Temp, CHT, and EGT
• Internal accelerometer and gyro sensors
• High-accuracy GPS with real-time delta feedback
• RPM wire with secure clip
• TR/TC patch cable compatibility only Note: Sensors do not connect directly to the unit
• Compatible with Race Studio 3 and Race Studio 2 software

Additional Race Studio setup information can be found here: How to Use AIM Race Studio for LO206

With its focus on accuracy and flexibility, the Mychron 6 T2 Dual Temperature Gauge is a must-have in any serious racer's toolkit.

Recommended Sensors to Unlock Advanced MyChron 6 Data (Optional)

The MyChron 6 platform becomes dramatically more powerful when additional sensors are added. These sensors are valuable for both advanced drivers and newer drivers, allowing performance issues to be identified even when driver feedback is limited. You can achieve strong results using the MyChron 6 alone, but these sensors provide the next level of insight when you are ready to dig deeper.

Front Wheel MPH Sensor (Highly Recommended)

Front Wheel MPH Sensor for MyChron 6

The front wheel speed sensor is one of the most valuable upgrades you can add to a MyChron 6. It allows true vehicle speed measurement independent of engine RPM, making it possible to diagnose kart performance even without driver input.

What this sensor allows you to analyze:

• True entry, mid-corner, and exit speed
• Rolling speed loss through corners
• Acceleration efficiency vs RPM
• Corner exit recovery rate
• Gear ratio effectiveness using RPM vs speed
• Brake drag and coast-down loss

This sensor alone is often enough to uncover the next few tenths. It excels for experienced drivers chasing fine margins and for newer drivers where seat feedback is inconsistent.

Infrared Tire Temperature Sensor Expansion

Infrared Tire Temperature Sensor Kit

Infrared tire temperature sensors add visibility into tire loading and balance. Instead of guessing what the kart is doing, you can see how each tire is being used throughout the lap.

Data and analysis made possible:

• Inside vs outside tire temperature balance
• Corner-specific tire loading trends
• Chassis balance evaluation
• Driving style impact on tire heat
• Tire performance degradation trends

Infrared Tire Temperature Mounting Kit (Required)

Infrared Tire Temperature Sensor Mounting Kit

This bracket kit is required to correctly position the infrared sensors. Proper mounting ensures accurate, repeatable temperature readings that can be trusted for tuning decisions.

When combined with speed, RPM, GPS, and accelerometer data, these sensors enable advanced Race Studio 3 formulas such as:

• RPM histogram–based gear optimization
• Speed vs RPM efficiency zones
• Corner entry and exit speed deltas
• Acceleration and deceleration efficiency
• Tire temperature change rate vs speed

These tools turn data into clear answers, whether you are refining a competitive setup or learning how the kart responds under different conditions.

---

Which MyChron 6 T2 Should You Order? (TR/TC vs “Choose Temp Leads”)

If you want the most common karting setup with the least chance of ordering the wrong sensor combination, the MC6T2 (TR/TC) option is usually the right choice. THIS ONE, YOUR ON THE RIGHT PAGE IF YOU HAVE a LO206, or 2 stroke KA100, Micro, Mini.

Why order the TR/TC version instead of the “Choose Temp Leads” version?

• Pre-matched and pre-configured for one TR input (Water Temp or CHT) and one TC input (EGT), which is what most racers run.
• Reduces mistakes, no guessing, no accidentally selecting two of the same sensor type.
• The typical Water or CHT plus EGT combination, the setup most people want when buying a dual temperature MyChron.
• Faster ordering, choose your leads and you are ready to install.

MC6T2 (TR/TC) Details

Only available in a TR/TC patch cable configuration.

This version is pre-configured as a mixed-input unit with one TR channel and one TC channel. It is built this way to ensure proper compatibility and to prevent ordering errors. The correct TR/TC patch cable is included.

What you get:

• 1 × TR thermistor temperature lead (Black connector, 10mm Water Temp or CHT Head Temp)
• 1 × TC thermocouple temperature lead (Yellow connector, EGT lead, TC option selected by you)
• RPM wire with clip
• Correct internal AIM TR/TC patch configuration

Why this SKU exists:

• Prevents accidentally ordering two TR sensors or two TC sensors
• Guarantees a proper Water or Head CHT plus EGT setup, the most common dual temperature configuration

This configuration is most commonly used for:

• LO206
• KA100
• X30
• Road race karts

Frequently Asked Questions

What does the included 30-minute data acquisition session cover?

The included 30-minute remote data acquisition session can be used for initial MyChron 6 setup, sensor configuration, Race Studio 3 walkthroughs, reviewing existing data, or answering questions specific to your kart, engine, and class. Advanced topics such as overlays, delta analysis, or gearing review can also be covered if requested.

What is the normal rate for remote data acquisition?

Remote data acquisition is normally billed at $95 per hour. As part of this package, customers receive a $65 per hour discounted rate during the promotional period.

Is there a minimum session length?

Yes. All remote data acquisition sessions have a one hour minimum, with the exception of the included 30-minute session.

Do you recommend additional session time?

Yes. While the included 30-minute session is a solid introduction, a two hour session is recommended for deeper work such as custom math channels, session overlays, gear ratio analysis, and multi-session comparison.

Does purchased data acquisition credit expire?

No. Any purchased data acquisition credit remains valid until used, even after the promotional period ends.

Can data acquisition be done during race weekends?

Yes. Remote race weekend data acquisition is available but must be scheduled 5 to 7 days in advance to ensure availability.

Is this a limited-time promotion?

Yes. Rates increase starting February 1st, and the promotion ends February 1st.

How do I know which EGT sensor I need for my exhaust?

EGT sensor selection depends on how your exhaust pipe is built and how detailed you want the data to be. All EGT sensors connect to the MyChron 6 using a TC (thermocouple) patch cable, which is already included with this MyChron 6 T2 package.

• 5mm Thread EGT Sensor: Used when the exhaust has a small drilled and tapped 5mm hole. Common on LO206 and similar engines.
• T-12 Style EGT Sensor (Open Tip): Used with exhausts that have a welded bung or large external nut. This open-tip sensor reacts faster and is recommended for advanced data analysis. An extension cable is required.
• 90 Degree Big Nut Closed Tip EGT Sensor: Also installs into a welded bung, but uses a shielded tip for smoother readings and added durability.

Quick tip: If your exhaust has a welded bung and you want the most detailed EGT data for gear ratio optimization and lap comparison, the T-12 open tip sensor is the recommended choice. The required TC patch cable is already included with this package.

Learn From Real Race Data

We provide access to real Race Studio 3 data files from national-level karting events. These files are used to study braking zones, apex points, corner exit behavior, RPM usage, and gearing decisions.

• 2025 CupKarts North America Grand Nationals 9 – New Castle Motorsports Park – LO206 Masters – PREFINAL #3
• 2025 K1 Circuit Whiteland Indy Karting Challenge – LO206 Masters – PREFINAL
• 2025 Quincy Grand Prix – Quincy, Illinois – LO206 Heavy – FINAL
• The KartPLEX at Motorsports Country Club of Cincinnati – KA100 Masters Qualifying
• The KartPLEX at Motorsports Country Club of Cincinnati – LO206 Gold Slide Junior – FINAL

View Real LO206 and KA100 Race Studio 3 Data Examples →

By comparing your laps to these files, you can identify time loss, RPM inefficiencies, and driving inconsistencies with measurable data.

---

Discover the advanced capabilities of the Mychron 6 T2 Dual Temperature Gauge with CHT Temp option, an essential tool for serious kart racers seeking precise engine monitoring and performance optimization. Designed specifically for the demands of high-speed karting, this gauge integrates seamlessly into your data acquisition system, providing real-time insights into critical temperature metrics, including cylinder head temperature (CHT). Whether you're fine-tuning your engine setup or analyzing post-race data, the Mychron 6 T2 ensures you have the information needed to push your kart to its limits.

The Mychron 6 T2 is configured using TR and TC patch cables, allowing racers to choose their preferred temperature sensor combination. Common setups include Water Temp or CHT paired with an EGT sensor. This dual temperature configuration allows for comprehensive monitoring of engine heat in air-cooled systems, helping you prevent overheating and maximize efficiency. The included RPM wire with clip offers straightforward installation, connecting effortlessly to your kart's ignition system for accurate speed and engine data. All configurations are available exclusively with TR/TC patch cables, ensuring compatibility with professional-grade AIM sensors.

Built with durability in mind, the Mychron 6 T2 features a robust, weather-resistant housing that withstands the rigors of track conditions, from dusty circuits to wet weather races. Its high-resolution display delivers clear, backlighted readings even in low-light environments, making it indispensable during twilight sessions or indoor tracks. The gauge supports wireless data transmission when paired with compatible Mychron accessories, allowing you to review telemetry on your laptop or tablet without cumbersome cables.

In the world of kart racing, where every degree counts, the Mychron 6 T2 Dual Temperature Gauge stands out for its versatility and precision. Racers value the ability to select the temperature sensors that best match their engine and class, whether that is direct cylinder head monitoring or exhaust gas temperature tracking. Installation is user-friendly, with color-coded patch cables and intuitive mounting options that fit most kart chassis without modifications.

Beyond basic monitoring, this gauge contributes to long-term vehicle health by alerting you to potential issues before they escalate. Integrate it with other Mychron 6 series components for a full data acquisition suite, including lap timers and GPS tracking. For teams or individual drivers, the Mychron 6 T2 represents a smart investment in reliability and performance.

Key features include:

• Dual temperature inputs using TR and TC patch cables
• User-selectable temperature sensor combinations, including Water Temp, CHT, and EGT
• RPM wire with secure clip for easy integration
• TR/TC patch cable compatibility only Note: Temperature inputs on the MyChron 6 T2 require AIM TR or TC patch cables. (dual TR/TC patch cable included) Sensors do not connect directly to the unit.
• High-contrast display for optimal visibility
• Compatible with Mychron data logging software, Race Studio 3 and 2.

Elevate your karting experience with the Mychron 6 T2 Dual Temperature Gauge. This gauge isn't just a device; it's your gateway to data-driven decisions that can shave seconds off your lap times and extend engine life. Perfect for both novice enthusiasts and seasoned professionals in the kart racing community.

With its focus on accuracy and ease of use, the Mychron 6 T2 Dual Temperature Gauge is a must-have in any serious racer's toolkit. Order yours today and experience the difference that professional-grade data acquisition can make on the track.