MyChron 6 Kart Racing Data Logger Kit

MyChron6 – Single Temperature Kart Racing Data Logger

Can't figure out exactly where you lose time on track or whether your engine is on the edge of damage? The MyChron 6 logs your lap times, splits, speed, RPM, chosen temperature, GPS position and g-forces so you can review exactly what happened on track.

For beginners it's the kart's smart dashboard that sits on your steering wheel and records all the important data automatically. Experienced drivers will use the 25 Hz GPS, 50 Hz 6-axis IMU, live delta bar, and Race Studio 3 software to analyze cornering forces, pitch, roll and find those critical tenths of a second.

Available Kits (All include MyChron6 head unit + USB cable)

Choose the kit that matches your engine and temperature sensor type:

Kit 1 – XM6CHT140 – $659.00

MyChron6 + CHT Cylinder Head Thermocouple (Binder) + USB cable
Includes the head unit, Binder-style CHT sensor, and USB cable. The Binder connector plugs directly into the MyChron6 — no patch cable needed. This is the simplest and most popular kit for LO206 and Animal 4-cycle engines.

Kit 2 – XM6CHT040 – $659.00

MyChron6 + CHT Cylinder Head Thermocouple (Mignon) + Patch cable + USB cable
Includes Mignon-style CHT sensor and the required patch cable. Perfect if you already own legacy Mignon thermocouples from MyChron 4/5 era.

Kit 3 – XM6EGT0 – $659.00

MyChron6 + Exhaust Gas Thermocouple M5 + Patch cable + USB cable
Includes the slim 5 mm M5 EGT probe (standard for 2-cycle engines) and patch cable. Ideal for jetting and clutch tuning on Rotax, X30, KZ, and shifter karts.

Kit 4 – XM6EGTT12 – $659.00

MyChron6 + EGT T12 + Patch cable + USB cable
Includes the heavy-duty right-angle T12 EGT probe (M12 thread). Preferred for shifter karts and higher-displacement 2-cycle engines.

Kit 5 – XM6EGTT12LL – $659.00

MyChron6 + EGT T12 Long Life + Patch cable + USB cable
Includes the reinforced Long Life T12 EGT probe. Choose this if you burn through standard EGT sensors quickly.

Kit 6 – XM6TRM10 – $659.00

MyChron6 + Water Thermoresistor M10 + Patch cable + USB cable
Includes the M10 water thermoresistor for accurate coolant temperature monitoring on water-cooled engines (Rotax, IAME X30, KZ, etc.).

This single-temperature MyChron 6 is the perfect step up from the MyChron 5 with a wider screen, live delta bar, longer 20-hour battery, Wi-Fi, Bluetooth, 6-axis IMU, and IP67 waterproof construction.

Specification Comparison

Frequently Asked Questions

Does the MyChron 6 fit my LO206 or Briggs 4-cycle kart?

Yes — it works perfectly with all classes including LO206, Briggs, clone engines, 2-cycle, 4-cycle, air-cooled, and water-cooled karts.

Which kit should I choose?

CHT kits are best for 4-cycle engines (LO206 / Animal). EGT kits are ideal for 2-cycle jetting and clutch tuning. The water thermoresistor kit is for water-cooled engines.

Is it compatible with Race Studio 3?

Yes — full Wi-Fi, Bluetooth, and USB support with complete Race Studio 3 analysis for laps, splits, GPS, IMU, and temperature data.