Precision Metric 10mm King Pin Bearing with 26mm OD for OTK Spindles

Engineered for seamless integration in OTK spindles, this metric king pin bearing delivers unmatched reliability on the track. With precise dimensions of 10mm inner diameter, 26mm outer diameter, and 8mm height, it supports effortless wheel rotation while cutting down on vibrations that can throw off your lap times.

• Superior Durability: Built to withstand intense racing pressures, ensuring your kart's front-end stays aligned for sharper cornering.
• Easy Fitment: Tailored for OTK chassis, making installation straightforward without specialized tools.
• Boosts Speed: By minimizing friction, it helps you shave seconds off your race pace through smoother steering response.

Whether you're tweaking your setup for a weekend race or fine-tuning for nationals, the KM314 bearing (SKU: KM314) is your go-to for professional-grade performance in Euro metric kart systems.

Frequently Asked Questions

Q: How do I know if my OTK king pin bearing needs to be replaced?

A: You should inspect your king pin bearings if you notice "play" or movement in the front spindles, or if the steering feels notchy or stiff. Any signs of rust, grit, or resistance when rotating the spindle indicate that the bearing has worn out and should be replaced to maintain precise handling.

Q: Is this bearing compatible with all OTK chassis models?

A: Yes, the KM314 is the standard metric king pin bearing used across the vast majority of OTK chassis (Tony Kart, Kosmic, Exprit, FA Kart, etc.) that utilize a 10mm king pin bolt. Always verify your current spindle setup to ensure it matches the 10mm ID and 26mm OD specifications.

Q: Do I need special tools to install the KM314 bearing?

A: No specialized tools are required. Because these are designed for a straightforward fit, you can typically remove the old bearing and press the new one into the spindle housing by hand or with a light tap from a rubber mallet. Ensure the spindle housing is clean and free of debris before installation.

Q: Should I grease these bearings before installing them?

A: While these bearings come pre-lubricated, applying a light coat of high-quality karting grease can help protect against moisture and debris, especially if you race in damp conditions. Avoid over-greasing, as this can attract dirt.

Related Products From Vendor

• OTK Tony Kart Steering Shaft Uniball Joint - 10mm x 26mm - All Classes