- Browse all categories
- Best Picks by Swift Karting: The Essential Pit Tools
-
- Brake Bleeder Kit
- Brake Fittings & Ferrules
- Brake Fluid
-
Brake Hubs
- Brake Line
-
Brake Parts (M.C.P.)
-
Brake Rotors
- Caliper Brackets
- Enginetics Parts
- Euro Brake Pads
- Front Wheel Brakes
- Master Cylinder Caps, Billet
- Quarter Midget Brakes
- Rotor Guards
-
- Alfano Gauges & Accessories
- Hour Meter
-
Mychron Gauges
- Stopwatches
- Tach Bags
- Transponder Holders
-
-
Axle Bearings
- Axle Cassettes
-
Axles & Accessories
-
Bully Clutches
-
Chain
- Chain Breaker Tools
- Clutch Drivers
- Clutch Friction Discs
- Clutch Mounting Bolt Kits
- Clutch Spacers
-
Hilliard Clutches
- Honda GXH50 Kid Kart Clutch
-
Horstman Clutch Parts
- Lock Collars
-
Max-Torque Clutches
-
Nor-Am Clutches
-
Premier Clutches
- SMC Kart Clutches
- Sprocket Guards & Hardware
-
Sprocket Hubs
-
Sprockets
-
Viper Clutches
-
-
-
196cc Clone Engine & Parts
-
212cc Clone / Predator Engine & Parts
- 224cc Clone Engine & Parts
- Air Filters & Pre Filters (1.25")
-
Air Filters & Pre Filters (2-7/16")
- Big Block Clone Accessories
-
Briggs LO206 Engines & Parts (LO206)
- Briggs Quarter Midget Engine and Parts
- Briggs World Formula
- Camshafts
- Carb Cover (2-7/8")
- Carb Manifolds
- Catch Tanks
- Chain Guards & Hardware
- Exhaust Header Wrap
- Exhaust Silencers & Clamps
- Flywheel Screens
- Fuel Filters
- Fuel Line
- Fuel Pumps
-
Fuel Tanks
-
Gaskets (Fel-Pro)
- Honda GXH50 Kid Kart
-
Motor Mounts
-
Oil & Additives
- Pulse Fittings
-
Raptor (Flathead) Parts
- Spark Plug Index Washers
- Spark Plugs (2-Cycle & Honda Kid Kart)
- Throttle Cables & Hardware
- Tillotson Carbs
- Wiseco Pistons
-
- Track Wear, Kart Life Apparel
DWT
DWT 5 Inch Polished Kart Wheel 2.5+3.5 Offset
DWT 5 Inch Polished Kart Wheel 2.5+3.5 Offset
Couldn't load pickup availability
A kart wheel is the aluminum rim a 5 inch tire mounts to. This DWT 600x5 polished wheel (OEM 705-13) uses a 3-lug bolt pattern and a 2.5+3.5 offset so you can set track width and scrub the way your setup sheet calls for in kart racing.
Racers pick a known DWT Douglas-style offset so the kart sits where they expect it on a sprint kart or dirt kart. Confirm hub and axle spacing on your chassis before you buy; many DWT 5 inch rims also run a 17mm hub bearing on metric fronts. The wheel is shown with a 3-hole hub face and a rubber valve stem installed. If you need a 5 inch DWT rim with even inner and outer bells instead, see the DWT DW500x5 2.5+2.5 offset wheel. For cadet-level notes on how tire heat and a solid rear axle change how the kart sits, read Kart Science Club on chassis flex and hot tires.
- Size: 5 inch (600x5)
- Offset: 2.5+3.5
- OEM part: DWT 705-13
- Bolt pattern: 3-lug
- Finish: polished aluminum
FAQ
Will this 5 inch DWT kart wheel fit my go-kart hub?
It is a 3-lug 5 inch (600x5) DWT wheel with 2.5+3.5 offset. Match that bolt pattern and offset to your hub and axle spacing. It is commonly used in kart racing to mount a 5 inch tire on sprint and dirt karts. Confirm fitment on your chassis before purchase.
Do I need to add a valve stem to this polished DWT 600x5 wheel?
The wheel is shown with a rubber valve stem already in place, so you can treat it as a complete 5 inch kart racing rim for tire mounting. Offset is listed as 2.5+3.5 only. Check your setup sheet so track width stays correct.
Related Products
- DWT DW400x5METB Black Metric Kart Wheel - 2.0+2.0 Offset, 3/58 Pattern
- Douglas 500x5 Metric DSM Wheel - Black Anodized with 17mm Bearings
- DWT 135mm Black DSM Front Wheel 5.315" Wide - 17mm Bearing CIK Compliant
- Short Valve Stem for Kart Wheels
- Lightweight Carbon Fiber Wheel Spacer 1/4" Wide x 3/4" ID for Kart Precision
✓ Product Highlights
- ✓This aluminum kart rim is the metal wheel a 5 inch tire mounts to on a sprint or dirt kart.
- ✓Size is 5 inch (600x5) as marked on the DWT badge on the outer lip.
- ✓Offset is 2.5+3.5, which sets how far the rim sits on the hub for track width and scrub.
- ✓Hub face uses a 3-lug bolt pattern; confirm hub and axle spacing on your chassis before purchase.
- ✓Finish is polished aluminum; a rubber valve stem is shown installed on the rim.
- ✓OEM reference is DWT 705-13 for this Douglas-style 600x5 wheel.
- ✓Used on front or rear as your setup sheet specifies; it does not include a tire.
- ✓Racers use a known offset so the kart sits at the width the setup sheet expects.
Share
