- Browse all categories
- Best Picks by Swift Karting: The Essential Pit Tools
-
- Brake Bleeder Kit
- Brake Fittings & Ferrules
- Brake Fluid
-
Brake Hubs
- Brake Line
-
Brake Parts (M.C.P.)
-
Brake Rotors
- Caliper Brackets
- Enginetics Parts
- Euro Brake Pads
- Front Wheel Brakes
- Master Cylinder Caps, Billet
- Quarter Midget Brakes
- Rotor Guards
-
- Alfano Gauges & Accessories
- Hour Meter
-
Mychron Gauges
- Stopwatches
- Tach Bags
- Transponder Holders
-
-
Axle Bearings
- Axle Cassettes
-
Axles & Accessories
-
Bully Clutches
-
Chain
- Chain Breaker Tools
- Clutch Drivers
- Clutch Friction Discs
- Clutch Mounting Bolt Kits
- Clutch Spacers
-
Hilliard Clutches
- Honda GXH50 Kid Kart Clutch
-
Horstman Clutch Parts
- Lock Collars
-
Max-Torque Clutches
-
Nor-Am Clutches
-
Premier Clutches
- SMC Kart Clutches
- Sprocket Guards & Hardware
-
Sprocket Hubs
-
Sprockets
-
Viper Clutches
-
-
-
196cc Clone Engine & Parts
-
212cc Clone / Predator Engine & Parts
- 224cc Clone Engine & Parts
- Air Filters & Pre Filters (1.25")
-
Air Filters & Pre Filters (2-7/16")
- Big Block Clone Accessories
-
Briggs LO206 Engines & Parts (LO206)
- Briggs Quarter Midget Engine and Parts
- Briggs World Formula
- Camshafts
- Carb Cover (2-7/8")
- Carb Manifolds
- Catch Tanks
- Chain Guards & Hardware
- Exhaust Header Wrap
- Exhaust Silencers & Clamps
- Flywheel Screens
- Fuel Filters
- Fuel Line
- Fuel Pumps
-
Fuel Tanks
-
Gaskets (Fel-Pro)
- Honda GXH50 Kid Kart
-
Motor Mounts
-
Oil & Additives
- Pulse Fittings
-
Raptor (Flathead) Parts
- Spark Plug Index Washers
- Spark Plugs (2-Cycle & Honda Kid Kart)
- Throttle Cables & Hardware
- Tillotson Carbs
- Wiseco Pistons
-
- Track Wear, Kart Life Apparel
BW Kart
Complete 1/2" King Pin Kit 3.75" for PRC and Charger Karts
Complete 1/2" King Pin Kit 3.75" for PRC and Charger Karts
Couldn't load pickup availability
Ready to overhaul your front end? This all-in-one 1/2-inch king pin kit provides everything for a pro-level install.
- AN-grade 6 drilled bolt at 3.75 inches for strength.
- Tall slotted castle nut and large safety pin for locking security.
- Six 0.060-inch stainless washers, two 0.030-inch AN washers, plus PRC-style spacer.
Compatible with 2008+ PRC, Charger Prodigy, and similar chassis, it allows fine caster tweaks to optimize tire contact and grip. Say goodbye to vague steering—gain the confidence to attack corners harder. Keeps your pit organized with no missing parts. SKU: BWKP375.
This kit's thoughtful inclusions cut setup time, letting you focus on dialing in speed for race day dominance.
Frequently Asked Questions
Q: Is this king pin kit compatible with all kart chassis?
A: This kit is specifically designed for 2008+ PRC, Charger Prodigy, and similar chassis. Please verify your current king pin length (3.75") before installation to ensure proper fitment.
Q: Why is the 3.75" length important for my steering setup?
A: The 3.75" length is the standard for many modern PRC and Charger karts. Using the correct length ensures that your caster and camber adjustments remain within the manufacturer's recommended geometry for optimal tire contact.
Q: How do the included washers help with my kart's handling?
A: The included 0.060" and 0.030" washers allow you to fine-tune your spindle height. Adjusting these spacers is a critical part of dialing in your front-end geometry to maximize grip and steering response.
Q: Should I replace both king pins at the same time?
A: Yes, it is highly recommended to replace both king pins simultaneously to ensure even wear and consistent steering performance on both sides of the kart.
Q: What is the benefit of the AN-grade 6 drilled bolt?
A: AN-grade hardware is aerospace-standard, offering superior tensile strength and fatigue resistance compared to standard hardware. The drilled bolt allows for the use of a safety pin, ensuring your king pin nut stays locked in place under the high-vibration environment of racing.
Related Products From Vendor
Essential 1/2" King Pin Washer Kit for PRC and Charger Chassis
Share
