Sturdy 3/8" Tie Rod 7.0" for Stable Kart Steering in High Speeds

Extend your reach for better control—the 7.0" 3/8" Tie Rod is built for karts that thrive on stability during demanding runs.

Standout features:

• Extended Span: 7 inches offer ample room for geometric tweaks, enhancing predictability in variable conditions.
• Lightweight Yet Tough: Aluminum composition balances strength with minimal mass for agile performance.
• Seamless Compatibility: Works with 3/8" heim setups, streamlining your build process.

From drafting packs to solo qualifiers, this rod ensures your steering stays true, helping you exploit every line on the circuit. It's the reliable link that connects setup to success. Rod ends not included. SKU: 38TR700.

Frequently Asked Questions

Q: How do I determine if a 7.0" tie rod is the correct size for my kart?

A: Measure your current tie rod from center-to-center of the rod ends. If you are adjusting your front-end geometry or steering rack position, ensure that a 7.0" rod allows for enough thread engagement on your heim joints to maintain structural integrity while achieving your desired track width.

Q: Are rod ends included with this tie rod?

A: No, this product is for the aluminum tie rod shaft only. You will need to source compatible 3/8" heim joints (rod ends) separately to complete your steering assembly.

Q: What is the benefit of using an aluminum tie rod over steel?

A: Aluminum provides an excellent strength-to-weight ratio. By reducing unsprung weight in the steering linkage, you can achieve more agile steering response and better feedback from the track surface compared to heavier steel alternatives.

Q: How often should I inspect my tie rods?

A: You should inspect your steering linkage before every race day. Check for any signs of bending, stress fractures, or loose jam nuts. Ensure the rod ends are tight and that there is no excessive play in the steering system to maintain predictable handling.

Related Products From Vendor

• 19mm Metric Toe Lock for Kart Steering Alignment
• UltraLite 5/8" Front Hub with 1/4" Bullet Tip Studs for Precision Kart Handling
• UltraFree Left Front Hub Equipped with 1/4 Inch Hardware for Karts
• Metric Pattern Front Hub Featuring 17mm Bearings and 5/16 Hardware
• Durable Seat Weight Bolt Mounting Kit for Kart Longevity