Bully .120 Optional Floater Plate for Reduced Air Gap

• Precision-machined to .120 thickness, this optional floater excels at closing air gaps in multi-disk clutches.
• Supplied with various four-disk Bully models to customize setup for specific track conditions.
• Promotes tighter tolerances, leading to sharper clutch response and reduced power loss.

Since its introduction, the Bully .120 Floater Plate has become a favorite among tuners who demand more from their drive-line components. Not a standard install in any single clutch as of recent updates, it offers flexibility to adapt your Bully 1" Turbo system for oval, dirt, or asphalt racing. By integrating this plate, you achieve better disc alignment, which means less slippage during high-RPM bursts and more consistent torque to the chain.

Imagine hitting the throttle harder out of tight turns without the hesitation that plagues poorly gapped clutches—this plate makes it possible. Its robust build handles the rigors of repeated engagements, extending the life of your friction materials and bearings. For those building custom clutch stacks, it's an indispensable tool to experiment with engagement points, potentially unlocking hidden speed in your kart's powerband. The SKU BCFP120 ensures you get the genuine part every time.

Easy to swap in during routine maintenance, this floater helps organize your pit setup by standardizing optional upgrades. Kart teams using it report enhanced drivability, especially in endurance races where clutch fatigue can derail a strong run. Elevate your performance without overcomplicating your build; this subtle upgrade yields big results on race day.

Frequently Asked Questions

Q: What is the primary purpose of the .120 Bully Floater Plate?

A: The .120 floater plate is designed to reduce the air gap in multi-disk Bully clutches. By closing this gap, you achieve tighter tolerances, which results in sharper clutch engagement, reduced slippage at high RPMs, and more consistent power transfer to the chain.

Q: How do I know if I need the .120 thickness versus other sizes?

A: Choosing the right floater plate depends on your specific clutch stack height and track conditions. Tuners use different thicknesses to customize engagement points. If you are experiencing clutch hesitation or excessive slippage, a thicker plate like the .120 can help tighten the stack for better performance.

Q: Is the .120 Floater Plate compatible with all Bully clutches?

A: This plate is designed for Bully 1" Turbo systems. Because it is an optional tuning component rather than a standard install, it is best used by those building custom clutch stacks to optimize their setup for oval, dirt, or asphalt racing.

Q: Can this plate help extend the life of my clutch components?

A: Yes. By promoting better disc alignment and reducing slippage during high-RPM bursts, the .120 floater plate helps minimize heat buildup and wear on your friction materials and bearings, leading to increased longevity for your drive-line components.

Related Products From Vendor

• .100" Bully Floater Plate for Middle Stack Positioning
• .095" Bully Floater Plate for Reduced Air Gap in Clutches
• 0.065" Bully Floater Plate for Compatible Clutch Systems
• OEM Bully Clutch 8-Tab Friction Disc for Superior Grip
• Bully Clutch Spring Height Gauge for Accurate Measurements