{"product_id":"vp-racing-power™-instant-detailer-and-gloss-enhancer","title":"VP Racing Power™ Instant Detailer and Gloss Enhancer","description":"\u003cp\u003eVP Power™ Instant Detailer \u0026amp; Gloss Enhancer is a fluoropolymer spray for a clean, slick finish on kart bodywork. After you wash the sidepods, nose, Nassau panel, and number plates, spray a light mist and wipe with a microfiber. Dust, dirt, and water bead instead of smearing across the plastic. It is the quick grid-side wipe when the kart has to look sharp for photos, sponsors, or the dummy grid.\u003c\/p\u003e\n\u003cp\u003eThis is a finish spray, not a degreaser and not a wax stripper. It will not pull off a wax or sealant already on painted panels. On kart plastic and vinyl it adds gloss and helps the next layer of dust wipe off easier. It does not replace a wash after a dirty session, and it does not remove baked-on tire rubber or graphics glue.\u003c\/p\u003e\n\u003cp\u003eUse it on the bodywork of an LO206 kart, not on the engine, clutch, chain, or brakes. Keep it off tires, the seat, the steering wheel, and pedal pads. A slick tire or a slick shoe is a crash, not a shine. Spray the panel, wipe with the grain of the plastic, and flip to a dry side of the towel so you do not grind grit into the vinyl.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eGood kart uses\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSidepods, nose, and Nassau panel after a wash\u003c\/li\u003e\n\u003cli\u003eNumber plates and sponsor vinyl before photos or the grid\u003c\/li\u003e\n\u003cli\u003eLight dust on bodywork between practice sessions\u003c\/li\u003e\n\u003cli\u003eTrailer-side wipe when the kart sat overnight and picked up film\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eDo not spray\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eTires, beads, or wheels you still have to handle\u003c\/li\u003e\n\u003cli\u003eBrake discs, pads, or the face of a rotor\u003c\/li\u003e\n\u003cli\u003eClutch, chain, sprockets, or axle\u003c\/li\u003e\n\u003cli\u003eSeat, steering wheel, or pedal pads\u003c\/li\u003e\n\u003cli\u003eAir filter, carb, or LO206 tin as a “shine” coat\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eHow to use on a kart\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eWash first if the bodywork has rubber dust or chain lube on it.\u003c\/li\u003e\n\u003cli\u003eShake the bottle. Mist a small section. Do not soak the panel.\u003c\/li\u003e\n\u003cli\u003eWipe with a clean microfiber. Flip the towel as it picks up dirt.\u003c\/li\u003e\n\u003cli\u003eStay off edges that dump product onto the tire or disc.\u003c\/li\u003e\n\u003cli\u003eLet it dry to a light film before you load the kart if you can.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eFAQ\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: Can I use this on an LO206 kart?\u003c\/strong\u003e\u003cbr\u003e\nA: Yes, on the plastic bodywork and number plates. Keep it off the engine, clutch, chain, brakes, and tires. The 206 does not need gloss. The pods do.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: Will it make the sidepods too slippery in a bump?\u003c\/strong\u003e\u003cbr\u003e\nA: It adds slickness to the surface finish. That is the point for dirt and water. It is not a handling product. Do not treat it like grip spray, and do not get it on tires.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: Is it safe on vinyl numbers and sponsor graphics?\u003c\/strong\u003e\u003cbr\u003e\nA: Used lightly and wiped off, it is meant for finished exterior surfaces, including vinyl. Test a small corner on old, peeling graphics. Do not flood fresh wrap and leave it wet.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: Can I skip washing and just detail the kart?\u003c\/strong\u003e\u003cbr\u003e\nA: No. Instant detailer hides light dust. It will smear rubber film and chain lube. Wash first, then use this for the last wipe.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: Will it remove wax or old polish?\u003c\/strong\u003e\u003cbr\u003e\nA: No. Unlike some stripper-style detailers, this formula is made to sit on top of an existing wax or sealant rather than dissolve it.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: Can I spray the helmet or visor?\u003c\/strong\u003e\u003cbr\u003e\nA: No. Use a helmet and visor product. This is for kart bodywork and similar hard exterior panels.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: What towel should I use?\u003c\/strong\u003e\u003cbr\u003e\nA: A clean, dry microfiber. A shop rag full of grit will haze the plastic and scratch vinyl. Keep a dedicated bodywork towel in the trailer.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: Can I use it on aluminum rails or the seat?\u003c\/strong\u003e\u003cbr\u003e\nA: Rails do not need a show shine, and the seat should stay dry and grippy. Stick to bodywork.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: When should I use it on race day?\u003c\/strong\u003e\u003cbr\u003e\nA: After the kart is washed and dry, before dummy grid or photos. Do not spray it in the grid box where overspray can hit a tire or rotor.\u003c\/p\u003e","brand":"VP Racing Fuels, Inc.","offers":[{"title":"17 oz","offer_id":54494145249598,"sku":"2110","price":12.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0962\/4721\/8494\/files\/VPRacingPowerInstantDetailerandGlossEnhancer.webp?v=1790141556","url":"https:\/\/swiftkarting.com\/products\/vp-racing-power%e2%84%a2-instant-detailer-and-gloss-enhancer","provider":"Swift Karting","version":"1.0","type":"link"}