{"title":"Axle Cassettes","description":"\u003cp\u003eAxle cassettes are chassis-mounted housings that locate and retain the rear axle bearings on a kart. Typical setups use a three-bolt flange pattern and are sized for common 1 inch or 1.25 inch axle bearings.\u003c\/p\u003e","products":[{"product_id":"pm-12sl10p-performance-pill-pm-12sl10p","title":"Performance Pill for Axiom and Xpect Kart Hangers - Set of Three Needed","description":"\u003cstrong\u003eSmall part, big impact\u003c\/strong\u003e—this performance pill is the key to locking in your Axiom or Xpect hanger adjustments, with three needed per kart to maintain structural integrity.\u003cul\u003e\n\u003cli\u003eCompatible with both Axiom and Xpect systems\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eThree required\u003c\/b\u003e for full kart installation\u003c\/li\u003e\n\u003cli\u003eEnsures precise spacing for optimal geometry\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eIt prevents slippage in dynamic conditions, allowing consistent caster and camber that sharpen your kart's turn-in. Organizing these pills in your toolkit simplifies tweaks between track sessions, keeping you ahead of the competition. SKU: PM-12SL10P.\u003c\/p\u003e\u003cp\u003eFor those chasing setup perfection, it facilitates micro-adjustments that yield macro gains in lap speed, making your drive-line more responsive and reliable.\u003c\/p\u003e\n\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eQ: How many performance pills do I need for my kart?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eA:\u003c\/strong\u003e You need a total of three performance pills per kart to ensure proper structural integrity and consistent geometry adjustments for your Axiom or Xpect hanger systems.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: Why are these pills necessary for my steering setup?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eA:\u003c\/strong\u003e These pills are designed to lock in your hanger adjustments and prevent slippage during dynamic track conditions. By ensuring precise spacing, they allow you to maintain consistent caster and camber settings for a more responsive turn-in.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: Are these compatible with all kart chassis?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eA:\u003c\/strong\u003e No, these are specifically engineered for Axiom and Xpect hanger systems. Please ensure your kart utilizes these specific systems before installation.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: Do I need any additional parts to protect these pills?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eA:\u003c\/strong\u003e While the pills are durable, we highly recommend using the \u003ca href=\"\/products\/pm-12sl10pc-performance-pill-cover-pm-12sl10pc\"\u003eProtective Performance Pill Cover for Axiom and Xpect Cassettes\u003c\/a\u003e to keep them secure and protected from debris during racing sessions.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: How do these pills help with my lap times?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eA:\u003c\/strong\u003e By facilitating micro-adjustments to your kart's geometry, these pills allow for \"macro gains\" in speed. They provide the reliability needed to fine-tune your drive-line, making the kart more predictable and faster through the corners.\u003c\/p\u003e\n\n\u003ch3\u003eRelated Products From Vendor\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/pm-12sl10-pmi-axiom-cassette-pm-12sl10\"\u003ePMI Axiom Axle Cassette - Versatile Left and Right Fit with Bearing Ring\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/pm-12sl10pc-performance-pill-cover-pm-12sl10pc\"\u003eProtective Performance Pill Cover for Axiom and Xpect Cassettes\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/pm-12ht9bs-performance-small-bearing-sleeve-pm-12ht9bs\"\u003ePerformance Small Bearing Sleeve for Axiom Kart Cassettes\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/pm-12ht9b-performance-big-bearing-sleeve-pm-12ht9b\"\u003ePerformance Big Bearing Sleeve for Axiom Cassettes - 72mm OD Fit\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/pm-3-20-metric-toe-lock-20mm-pm-3-20\"\u003e20mm Metric Toe Lock for Precise Kart Alignment\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Performance Manufacturing","offers":[{"title":"Default Title","offer_id":52562570051902,"sku":"PM-12SL10P","price":9.91,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0962\/4721\/8494\/files\/axlecassettes-pm-12sl10p-performance-pill-pm-12sl10p.jpg?v=1763112064"},{"product_id":"3hbf1-flangette-for-1-0-axle-bearing-3hbf1-3hbf1","title":"Steel Flangette for 1.0-Inch Axle Bearings - Original Three-Bolt Pattern","description":"\u003cp\u003eWhy settle for flimsy alternatives when this robust steel flangette guarantees unwavering axle support? Bright zinc plating fights corrosion, ensuring longevity in demanding track environments.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eMatches original industry-standard 3.0-inch bolt circle\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eTwo required per bearing\u003c\/b\u003e for complete stability\u003c\/li\u003e\n\u003cli\u003eDoes not fit post-1980 1.25-inch patterns—perfect for authentic builds\u003c\/li\u003e\n\u003cli\u003eSold individually for flexible ordering\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eIt anchors your bearings firmly, reducing friction and enhancing power delivery, which means quicker acceleration and more controlled handling. For restorers or vintage racers, it simplifies organizing legacy components, cutting down on setup time and letting you hit the track sooner. SKU: 3HBF1. Elevate your classic kart's performance without modern compromises.\u003c\/p\u003e\n\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eQ: How many flangettes do I need for my kart?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eA:\u003c\/strong\u003e You need two flangettes per bearing to ensure complete stability and proper alignment of your 1.0-inch axle bearings.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: Will this flangette fit my modern 1.25-inch axle?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eA:\u003c\/strong\u003e No, this specific flangette is designed for 1.0-inch axle bearings and does not fit the post-1980 1.25-inch industry standards.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: Why is the bright zinc plating important?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eA:\u003c\/strong\u003e The bright zinc plating provides a protective barrier against corrosion, which is essential for maintaining the integrity of your kart's components in harsh, moisture-prone track environments.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: What is the bolt pattern for this flangette?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eA:\u003c\/strong\u003e This flangette matches the original industry-standard 3.0-inch bolt circle, making it an ideal choice for authentic vintage kart builds.\u003c\/p\u003e\n\n\u003ch3\u003eRelated Products From Vendor\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/1-axle-lock-collar-lc1\"\u003e1 Inch Two-Piece Axle Lock Collar with Keyway for Kart Precision\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/3hbf125-flangette-for-1-25-axle-bearing-3hbf125-3hbf125\"\u003eDurable Flangette for 1.25-Inch Axle Bearings - Industry Standard Fit\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/30mm-axle-lock-collar-lc30mm\"\u003ePrecision 30mm Axle Lock Collar for European-Style Kart Chassis\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/30mm-axle-lock-collar-with-shoulder-lc30-ws\"\u003e30mm Axle Lock Collar with 7mm Shoulder for Narrow Bearing Clearance\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/50mm-axle-lock-collar-lc50\"\u003eStrong 50mm Aluminum Two-Piece Axle Lock Collar with 8mm Keyway\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Swift Karting","offers":[{"title":"Default Title","offer_id":52562589483326,"sku":"3HBF1","price":6.92,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0962\/4721\/8494\/files\/axlecassettes-3hbf1-flangette-for-1-0-axle-bearing-3hbf1-3hbf1.jpg?v=1763112379"},{"product_id":"prc-cp-cassette-alignment-pin-sold-each-prc-cp","title":"Precision Cassette Alignment Pin for Kart Axles","description":"\u003cp\u003eDon't underestimate the role of a single alignment pin in your kart's success—the PRC-CP delivers pinpoint accuracy for cassette installation.\u003c\/p\u003e\u003cp\u003eSold each, this pin fits PRC systems, locking components in place to prevent shifts that could disrupt your race line. By ensuring true alignment, it enhances axle stability, leading to smoother rides and quicker responses to throttle inputs.\u003c\/p\u003e\u003cp\u003eIdeal for quick fixes or full rebuilds, it helps organize your spares kit efficiently. SKU PRC-CP for reference.\u003c\/p\u003e\n\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eQ: How do I use the PRC Cassette Alignment Pin during installation?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eA:\u003c\/strong\u003e Simply insert the pin into the designated alignment holes on your cassette and axle carrier. This locks the components in the correct position, ensuring the axle is perfectly centered before you tighten your mounting bolts.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: Is this alignment pin compatible with all kart brands?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eA:\u003c\/strong\u003e This pin is specifically designed for PRC systems. While it may fit other standard cassette setups, we recommend verifying your carrier hole diameter to ensure a snug, accurate fit.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: Why is it important to use an alignment pin instead of just eyeballing the cassette?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eA:\u003c\/strong\u003e Even a slight misalignment in your axle cassette can cause binding, increased friction, and unpredictable handling. Using the PRC-CP ensures your axle rotates freely and maintains the geometry required for consistent race lines.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: Should I replace these pins during a routine axle service?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eA:\u003c\/strong\u003e Yes. If your pins show signs of wear, bending, or corrosion, they can lose their ability to hold the cassette securely. Keeping fresh pins in your spares kit is an inexpensive way to ensure your driveline remains perfectly aligned.\u003c\/p\u003e\n\n\u003ch3\u003eRelated Products From Vendor\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/prc-ck-phantom-style-cassette-kit-prc-ck\"\u003eComplete Phantom Style Cassette Kit for Kart Drivelines\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"PRC","offers":[{"title":"Default Title","offer_id":52562590302526,"sku":"PRC-CP","price":4.93,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0962\/4721\/8494\/files\/axlecassettes-prc-cp-cassette-alignment-pin-sold-each-prc-cp.jpg?v=1763112394"},{"product_id":"2hbf1-two-hole-1-0-bearing-flange-km52m2","title":"KM Vintage Style 2-Hole Bearing Flange - 1.0-Inch Axle - Vintage Kart Racing","description":"\u003cp\u003eLock down your driveline and maximize power transfer with this KM 1.0-inch 2-hole bearing flange, an essential upgrade among premium racing go kart parts designed for vintage chassis restoration. Engineered to securely house your 1-inch axle bearings, this heavy-duty flange eliminates lateral play and unwanted vibration at high RPMs. When paired with a rigid bearing hanger, it ensures your rear axle remains perfectly aligned under extreme cornering loads, translating every ounce of engine output directly to the track surface.\u003c\/p\u003e\u003ch2\u003eSeamless Integration with Go Kart Axle Kits\u003c\/h2\u003e\u003cp\u003eVintage racing demands absolute precision, and compromised driveline components will instantly scrub speed. This two-hole bearing flange is purpose-built to integrate flawlessly with classic go kart axle kits, providing the clamping force required to keep your axle cassette firmly in place. By maintaining true axle geometry, you reduce rolling resistance and prevent premature wear on your bearings and sprocket hubs. Whether you're running a high-torque vintage 2-cycle or trying to maximize your Briggs and Stratton LO206 horsepower, a stable axle is the foundation of a winning setup.\u003c\/p\u003e\u003ch2\u003eComplementing Steering Components and Brake Pistons\u003c\/h2\u003e\u003cp\u003eA kart's handling is only as good as its weakest link. While racers often focus heavily on upgrading steering components or installing high-performance brake pistons, driveline stability is equally critical to chassis balance. If your axle shifts under braking, even the best brake system will suffer from unpredictable pad knockback and inconsistent pedal feel. This KM bearing flange locks the rear geometry down, ensuring that your chassis inputs—from aggressive turn-in to threshold braking—are executed with razor-sharp predictability.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e1.0-Inch Axle Compatibility:\u003c\/strong\u003e Precision-stamped to perfectly accommodate standard 1-inch axle bearings for vintage karts.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTwo-Hole Mounting Design:\u003c\/strong\u003e Provides a secure, straightforward bolt-on installation to standard bearing hangers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHeavy-Duty Steel Construction:\u003c\/strong\u003e Resists flexing and fatigue under high-torsion racing loads.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFriction Reduction:\u003c\/strong\u003e Maintains perfect bearing alignment to eliminate drag and maximize top-end speed.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVibration Dampening:\u003c\/strong\u003e Secures the axle cassette tightly to prevent high-frequency chassis vibrations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVintage Class Compliant:\u003c\/strong\u003e Authentic design and dimensions ideal for retro kart restorations and vintage racing leagues.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCorrosion Resistant Finish:\u003c\/strong\u003e Treated to withstand harsh track conditions, track rubber, and chemical cleaners.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eQ: Is this bearing flange compatible with all 1-inch kart axles?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eA:\u003c\/strong\u003e Yes, this flange is precision-stamped to fit standard 1-inch axle bearings used in most vintage and classic karting chassis. It is designed to provide a secure, bolt-on fit for standard bearing hangers.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: Why is a 2-hole flange better than a standard mount?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eA:\u003c\/strong\u003e The 2-hole mounting design provides a more secure, balanced clamping force compared to single-point mounts. This helps eliminate lateral play and vibration, which is critical for maintaining axle alignment during high-speed cornering.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: How do I know if my bearing flange needs to be replaced?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eA:\u003c\/strong\u003e You should inspect your flanges if you notice excessive vibration, uneven tire wear, or if the axle feels loose within the hanger. If the flange shows signs of fatigue, cracking, or if it no longer holds the bearing housing tightly, it should be replaced to prevent driveline failure.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: Does this flange require any special tools for installation?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eA:\u003c\/strong\u003e No special tools are required. It is a straightforward bolt-on component. Ensure your bearing hanger surfaces are clean and free of debris before installation to ensure the flange sits flush and maintains proper geometry.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: Can this be used on modern karts or only vintage models?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eA:\u003c\/strong\u003e While specifically engineered for the dimensions and requirements of vintage kart restorations, it can be used on any kart utilizing a standard 1-inch axle and 2-hole bearing hanger configuration.\u003c\/p\u003e\n\n\u003ch3\u003eRelated Products From Vendor\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/quick-release-steering-hub-for-5-8-shafts-km501\"\u003eKM Quick Release Steering Hub for 5\/8\" Kart Shafts\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/km303-brake-pedal-3-8-od-km303\"\u003e3\/8-Inch OD Wire Brake Pedal for Reliable Kart Stopping Power\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/km302-throttle-pedal-3-8-od-km302\"\u003e3\/8-Inch OD Wire Throttle Pedal for Kart Precision\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/throttle-kit-stock-flat-head-carb-kmbtk\"\u003eComplete Throttle Kit for Stock Flathead Carburetor\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"KM","offers":[{"title":"Default Title","offer_id":52562591252798,"sku":"KM52M2","price":6.92,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0962\/4721\/8494\/files\/axlecassettes-2hbf1-two-hole-1-0-bearing-flange-km52m2.jpg?v=1763112418"},{"product_id":"braac-adjustable-axle-cassette-braac","title":"Versatile Adjustable Axle Cassette for Wedge and Lead Adjustments","description":"\u003cp\u003eFine-tune your kart's balance like a pro with this adjustable axle cassette, offering versatile mounting options that let you dial in wedge for better grip or lead for straight-line punch. Crafted from premium black anodized aluminum, it resists wear while providing the flexibility to adapt to any track's demands.\u003c\/p\u003e\u003cp\u003eWhy choose adjustable? Fixed setups limit your potential—this design empowers quick changes without major disassembly, saving time and keeping you competitive. It accommodates 1 1\/4-inch free spin bearings (order separately, such as FSB, RBI, or TNR-UC206), ensuring smooth rotation that cuts friction and boosts acceleration.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eMultiple holes for up\/down and side adjustments\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eMounting bolts sold separately\u003c\/b\u003e for custom fit\u003c\/li\u003e\n\u003cli\u003ePerformance Manufacturing OEM # PM-35 for trusted quality\u003c\/li\u003e\n\u003cli\u003eIdeal for small bearing applications in American karts\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eOrganize your drive-line with ease; the anodized finish simplifies cleaning after muddy sessions, maintaining a sharp look and function. Racers report noticeable improvements in corner exit speed after optimizing with this cassette, turning average setups into race-winners. SKU: BRAAC.\u003c\/p\u003e\u003cp\u003eWhether battling tight ovals or sweeping road courses, it delivers the adjustability needed for personalized handling, directly contributing to faster overall times and more organized race prep.\u003c\/p\u003e\n\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eQ: What size bearings are compatible with this axle cassette?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eA:\u003c\/strong\u003e This cassette is designed to accommodate 1 1\/4-inch free spin bearings. We recommend using compatible bearings such as FSB, RBI, or TNR-UC206 for optimal performance.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: How does adjusting the cassette affect my kart's handling?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eA:\u003c\/strong\u003e The adjustable mounting holes allow you to dial in wedge to increase grip in corners or adjust lead to improve straight-line acceleration. This flexibility helps you adapt your chassis to specific track conditions without requiring a complete teardown.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: Are the mounting bolts included with the cassette?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eA:\u003c\/strong\u003e No, mounting bolts are sold separately. This allows you to select the specific hardware required for your unique chassis setup.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: Is this cassette suitable for all kart types?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eA:\u003c\/strong\u003e This model is specifically engineered for small bearing applications commonly found on American karts. Please verify your axle size and bearing requirements before installation.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: How do I maintain the anodized finish?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eA:\u003c\/strong\u003e The black anodized aluminum finish is highly durable and resistant to wear. It can be easily cleaned with standard kart cleaners after sessions, even in muddy conditions, to maintain its professional appearance and function.\u003c\/p\u003e\n\n\u003ch3\u003eRelated Products From Vendor\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/kmac-1-1-4-cnc-axle-cassettes-each-bearings-sold-separately-kmac\"\u003ePerformance Manufacturing PM-12-3\/8 CNC Axle Cassette - 1 1\/4-Inch - American Karts\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/1-1-4-floating-sprocket-hub-black-pm-015-fs\"\u003eBlack 1 1\/4 Inch Floating Sprocket Hub PM-015-FS for Adjustable Kart Drive\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/pmi-sprocket-hub-1-25-pm-15\"\u003ePerformance Manufacturing PM-15 1.25\" Sprocket Hub - Black Anodized - All Classes\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/carbon-fiber-spacer-kit-cfsk\"\u003eVersatile Carbon Fiber Spacer Kit for 1.25\" Kart Axles\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/1-1-4-sprocket-hub-black-new-design-as-of-02-08-2019-aph125b\"\u003ePerformance Manufacturing APH125B 1 1\/4\" Sprocket Hub - Black Billet - All Classes\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Performance Manufacturing","offers":[{"title":"Default Title","offer_id":52562610880830,"sku":"BRAAC","price":62.04,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0962\/4721\/8494\/files\/axlecassettes-braac-adjustable-axle-cassette-braac.jpg?v=1763112779"},{"product_id":"kmacp-1-1-4-cnc-axle-cassette-for-big-bearings-each-bearings-sold-seperatly-kmacp","title":"1 1\/4-Inch CNC Axle Cassette for Big Bearings - Sold Each","description":"\u003cp\u003eBig bearings demand big performance— this KMACP cassette is CNC-crafted to house them securely, fitting 2.835-inch OD options such as our FSBP, RBI-BIG, or TNR-UC207. Sold individually, it allows precise matching for your kart's needs, including compatibility with 1.375-inch sizes.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eMounting bolts sold separately for custom setups\u003c\/li\u003e\n\u003cli\u003ePerformance Manufacturing OEM # PM-12SM\u003c\/li\u003e\n\u003cli\u003eOptimizes load distribution for reduced wear and higher speeds\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eBy accommodating oversized bearings, it provides superior support that dampens vibrations, leading to smoother rides and quicker recovery from bumps—key for shaving time in technical sections. This helps organize heavier drive-line components without bulk, keeping your kart agile. SKU: KMACP.\u003c\/p\u003e\u003cp\u003eRacers using big bearings for endurance events find it invaluable for maintaining alignment, ensuring consistent power delivery. Upgrade to this for the robustness that turns potential failures into reliable wins, all while streamlining track-side adjustments.\u003c\/p\u003e\n\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eQ: What size bearings are compatible with this KMACP axle cassette?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eA:\u003c\/strong\u003e This cassette is specifically designed for \"big bearings\" with a 2.835-inch outside diameter (OD), such as the FSBP, RBI-BIG, or TNR-UC207 models. It is designed to fit a 1 1\/4-inch axle.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: Are the mounting bolts included with the cassette?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eA:\u003c\/strong\u003e No, mounting bolts are sold separately. This allows you to select the specific hardware length and type required for your unique kart chassis setup.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: Why should I upgrade to a CNC-machined axle cassette?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eA:\u003c\/strong\u003e CNC-machined cassettes offer superior precision and structural integrity compared to stamped alternatives. They provide better load distribution, reduce vibration, and ensure your axle remains perfectly aligned, which is critical for consistent power delivery and handling in technical sections.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: Are these cassettes sold as a set or individually?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eA:\u003c\/strong\u003e This product is sold as a single unit (each). This gives you the flexibility to replace a single damaged cassette or purchase exactly what you need for your specific kart configuration.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: Is this compatible with standard 1 1\/4-inch kart axles?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eA:\u003c\/strong\u003e Yes, this cassette is engineered to accommodate 1 1\/4-inch axle sizes while housing the larger 2.835-inch OD bearings for increased durability.\u003c\/p\u003e\n\n\u003ch3\u003eRelated Products From Vendor\u003c\/h3\u003e\n\u003cp\u003e\u003ca href=\"\/products\/kmac-split-style-axle-cassettes-sold-as-a-pair-pr-skmac\"\u003eSplit-Style CNC Axle Cassettes Pair for 1 1\/4-Inch Bearings in Karts\u003c\/a\u003e\u003c\/p\u003e","brand":"KMAC","offers":[{"title":"Default Title","offer_id":52562619826494,"sku":"KMACP","price":41.32,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0962\/4721\/8494\/files\/axlecassettes-kmacp-1-1-4-cnc-axle-cassette-for-big-bearings-each-bearings-sold-seperatly-kmacp.jpg?v=1763112979"},{"product_id":"kmac-1-1-4-cnc-axle-cassettes-each-bearings-sold-separately-kmac","title":"Performance Manufacturing PM-12-3\/8 CNC Axle Cassette - 1 1\/4-Inch - American Karts","description":"Eliminating rear-axle bind and maximizing free-spin is non-negotiable for podium finishes, which is why every serious go kart shop stocks the Performance Manufacturing 1 1\/4-inch billet aluminum axle cassette. Engineered specifically for American kart chassis, this CNC-machined component securely houses your 1 1\/4-inch bearings while maintaining absolute structural rigidity under extreme lateral loads. When you are pushing the limits through high-speed sweepers, chassis flex can cause standard cast cassettes to bind the axle, robbing you of crucial exit speed. This billet aluminum upgrade ensures your drive-line remains perfectly aligned, transferring every ounce of horsepower directly to the track surface.\n\n\u003ch2\u003eUncompromising Durability Beyond Your Kart Steering Wheel\u003c\/h2\u003e\nRacing demands components that refuse to yield. While many drivers focus on dialing in their front-end geometry with a new kart steering wheel or bleeding the lines with premium brake oil, your rear-end setup requires the same level of meticulous attention. The Performance Manufacturing PM-12-3\/8 cassette is cut from high-grade billet aluminum, offering vastly superior tensile strength compared to OEM cast alternatives. This rigidity prevents bearing distortion during aggressive curb strikes and heavy braking zones. By isolating the axle from chassis twist, you drastically reduce friction and heat buildup, ensuring your bearings survive the grueling demands of endurance races and national-level sprint mains.\n\n\u003ch2\u003ePrecision Tuning: From Carb Parts to Axle Cassettes\u003c\/h2\u003e\nSold individually, this cassette allows for targeted replacements and modular pit-box inventory management. You don't need to buy a full set when a single side takes a hit. Just like keeping spare carb parts on hand for quick tuning changes, having a single replacement cassette ready means less downtime between heats. The standard 3\/8-16 bolt hole pattern integrates seamlessly with most American kart bearing hangers, allowing for rapid installation and precise cross-weight or axle lead adjustments.\n\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCNC-Machined Billet Aluminum:\u003c\/strong\u003e Delivers unmatched structural rigidity to prevent axle bind under heavy lateral G-forces.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1 1\/4-Inch Bearing Compatibility:\u003c\/strong\u003e Precision-bored to house standard free-spin bearings with zero tolerance slop.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e3\/8-16 Bolt Hole Pattern:\u003c\/strong\u003e Standardized mounting configuration for seamless integration with American kart chassis hangers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFriction-Reducing Design:\u003c\/strong\u003e Maintains true axle alignment to maximize horsepower transfer and straight-line speed.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eModular Replacement:\u003c\/strong\u003e Sold individually to allow for cost-effective, targeted drive-line repairs without buying a full set.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOEM Authenticity:\u003c\/strong\u003e Exact Performance Manufacturing PM-12-3\/8 specification guarantees race-proven reliability.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCorrosion Resistance:\u003c\/strong\u003e Premium finish resists degradation from harsh track chemicals, degreasers, and debris.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eEvery fraction of a horsepower matters. By upgrading to a rigid, precision-machined axle cassette, you are eliminating the parasitic drag that plagues lesser setups. Lock in your rear-end geometry and experience the responsive, bind-free acceleration that professional drivers demand.\u003c\/p\u003e\n\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eQ: Is this axle cassette compatible with all kart chassis?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eA:\u003c\/strong\u003e This cassette is specifically engineered for American kart chassis using a 1 1\/4-inch axle and a standard 3\/8-16 bolt hole pattern. Please verify your chassis hanger configuration before purchase.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: Are the bearings included with this cassette?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eA:\u003c\/strong\u003e No, bearings are sold separately. This cassette is precision-bored to house standard 1 1\/4-inch free-spin bearings.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: Why should I choose billet aluminum over a cast cassette?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eA:\u003c\/strong\u003e Billet aluminum offers significantly higher tensile strength and rigidity. This prevents the cassette from flexing or distorting under heavy lateral loads or curb strikes, which helps eliminate axle bind and ensures your kart maintains optimal free-spin.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: Can I replace just one side, or do I need to replace both?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eA:\u003c\/strong\u003e These cassettes are sold individually, allowing for targeted, cost-effective repairs. You can replace a single damaged unit without needing to purchase a full set.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: How does this cassette affect my kart's performance?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eA:\u003c\/strong\u003e By maintaining perfect axle alignment and preventing bind, this cassette reduces parasitic drag. This allows for more efficient horsepower transfer to the track, resulting in better exit speed and more consistent handling through high-speed corners.\u003c\/p\u003e\n\n\u003ch3\u003eRelated Products From Vendor\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/pm-12sl10-pmi-axiom-cassette-pm-12sl10\"\u003ePMI Axiom Axle Cassette - Versatile Left and Right Fit with Bearing Ring\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/pm-012300r-axle-cassette-2025-style-pm-012300r\"\u003e2025-Style Clamshell Axle Cassette for Smooth Kart Drive-Line Performance\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/braac-adjustable-axle-cassette-braac\"\u003eVersatile Adjustable Axle Cassette for Wedge and Lead Adjustments\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/1-1-4-floating-sprocket-hub-black-pm-015-fs\"\u003eBlack 1 1\/4 Inch Floating Sprocket Hub PM-015-FS for Adjustable Kart Drive\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/carbon-fiber-spacer-kit-cfsk\"\u003eVersatile Carbon Fiber Spacer Kit for 1.25\" Kart Axles\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Performance Manufacturing","offers":[{"title":"Default Title","offer_id":52562626216254,"sku":"KMAC","price":21.73,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0962\/4721\/8494\/files\/axlecassettes-kmac-1-1-4-cnc-axle-cassettes-each-bearings-sold-separately-kmac.jpg?v=1763113129"},{"product_id":"pm-12sl10-pmi-axiom-cassette-pm-12sl10","title":"PMI Axiom Axle Cassette - Versatile Left and Right Fit with Bearing Ring","description":"\u003cp\u003eThe Axiom cassette from PMI redefines versatility, compatible with both left and right axle positions to streamline your build process and ensure symmetric performance. While the bearing ring is not included, its design anticipates easy integration for a cohesive rear end.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eFits universally for left\/right applications\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eBearing ring required (order separately)\u003c\/b\u003e for full assembly\u003c\/li\u003e\n\u003cli\u003ePromotes low-friction axle operation\u003c\/li\u003e\n\u003cli\u003eBuilt for enduring racing stresses\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThis cassette secures bearings firmly, minimizing misalignment that causes drag—resulting in freer wheel spin and faster overall pace. For pit crews, its dual-fit nature organizes inventory, reducing part confusion during frantic pre-race checks. SKU: PM-12SL10.\u003c\/p\u003e\u003cp\u003eAdvanced geometry aids in fine-tuning handling, giving you the confidence to push harder into apexes. Kart engineers favor it for its role in balanced chassis dynamics, directly linking to podium-contending laps. Whether in sprints or longer formats, it delivers the reliability that wins races.\u003c\/p\u003e\u003cp\u003eUpgrade to Axiom for that professional touch, where every rotation counts toward victory.\u003c\/p\u003e\n\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eQ: Is the bearing ring included with the Axiom Axle Cassette?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eA:\u003c\/strong\u003e No, the bearing ring is not included. You will need to order the appropriate bearing sleeve separately to complete your assembly.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: Can this cassette be used on both sides of the kart?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eA:\u003c\/strong\u003e Yes, the Axiom cassette is designed with a versatile, dual-fit geometry that allows it to be used on either the left or right axle position, helping to streamline your setup and inventory.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: How does this cassette improve kart performance?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eA:\u003c\/strong\u003e By securing the bearings firmly and minimizing misalignment, this cassette reduces drag and promotes freer wheel spin, which helps maintain momentum and improves your overall lap times.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: What maintenance is required for the Axiom cassette?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eA:\u003c\/strong\u003e Regularly inspect the cassette for signs of wear or misalignment during your pre-race checks. Ensure the hardware is torqued correctly to maintain the structural integrity required for high-stress racing conditions.\u003c\/p\u003e\n\n\u003ch3\u003eRelated Products From Vendor\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/pm-12ht9bs-performance-small-bearing-sleeve-pm-12ht9bs\"\u003ePerformance Small Bearing Sleeve for Axiom Kart Cassettes\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/pm-12ht9b-performance-big-bearing-sleeve-pm-12ht9b\"\u003ePerformance Big Bearing Sleeve for Axiom Cassettes - 72mm OD Fit\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/pm-12sl10pc-performance-pill-cover-pm-12sl10pc\"\u003eProtective Performance Pill Cover for Axiom and Xpect Cassettes\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/pm-012300r-axle-cassette-2025-style-pm-012300r\"\u003e2025-Style Clamshell Axle Cassette for Smooth Kart Drive-Line Performance\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/carbon-fiber-spacer-kit-cfsk\"\u003eVersatile Carbon Fiber Spacer Kit for 1.25\" Kart Axles\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"PMI","offers":[{"title":"Default Title","offer_id":52562628116798,"sku":"PM-12SL10","price":54.73,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0962\/4721\/8494\/files\/axlecassettes-pm-12sl10-pmi-axiom-cassette-pm-12sl10.jpg?v=1763113171"},{"product_id":"pursuit-xpect-bearing-insert-small-pm-012004","title":"Small Bearing Insert for Pursuit and Xpect Kart Cassettes","description":"\u003cp\u003ePrecision engineering meets practical needs in this OEM insert, tailored to elevate Pursuit and Xpect performance.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCompact small size for snug bearing housing.\u003c\/li\u003e\n\u003cli\u003eCompatible only with Pursuit and Xpect cassettes—won't work on Axiom variants.\u003c\/li\u003e\n\u003cli\u003ePMI original part number PM-012004 guarantees authenticity and fit.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eBy locking in your bearing, it eliminates wobble that robs speed, ensuring every ounce of torque propels you forward. This leads to crisper turns and stable straights, where consistency wins races.\u003c\/p\u003e\u003cp\u003eGreat for routine servicing, it helps keep your toolkit streamlined. The SKU PM-012004 aids in fast lookups during busy race weekends.\u003c\/p\u003e\u003cp\u003eIn action, it supports better load handling, reducing stress on axles during bumps—translating to fewer adjustments and more track time focused on perfecting your line.\u003c\/p\u003e\n\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eQ: Is this bearing insert compatible with my Axiom kart?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eA:\u003c\/strong\u003e No, this specific insert (PM-012004) is precision-engineered exclusively for Pursuit and Xpect kart cassettes. It is not compatible with Axiom variants.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: Why is it important to use this insert for my bearings?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eA:\u003c\/strong\u003e The insert locks the bearing securely into the housing, eliminating unwanted wobble. By removing this play, you ensure more efficient power transfer, crisper turn-in, and improved stability on straightaways.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: How does this part help with race weekend maintenance?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eA:\u003c\/strong\u003e Using the correct OEM insert ensures a perfect fit, which reduces stress on your axles during bumps and heavy cornering. This leads to fewer mid-weekend adjustments and allows you to spend more time focusing on your racing line.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: Can I use this for other bearing sizes?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eA:\u003c\/strong\u003e This is a compact, small-size insert designed specifically for the bearing housing dimensions of the Pursuit and Xpect models. Always verify your specific cassette requirements before installation.\u003c\/p\u003e\n\n\u003ch3\u003eRelated Products From Vendor\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/pursuit-xpect-right-axle-cassette-pm-012100\"\u003eRight-Side Axle Cassette for Pursuit and Xpect Kart Models\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/pmi-laser-alignment-system-standard-axle-pm-091200st\"\u003ePMI Laser Alignment System for Standard Axle Karts\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/pmi-digital-spring-height-gauge-pm-134200\"\u003ePMI Digital Spring Height Gauge with Case for Kart Tuning\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/pmi-pursuit-14-extra-cross-stepped-spindle-rh-pm-124340\"\u003ePMI Pursuit 14° Extra Cross Stepped Right-Hand Spindle for Extreme Grip\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/pmi-pursuit-10-high-cross-spindle-rh-pm-124350\"\u003ePMI Pursuit Right-Hand 10° High Cross Spindle for Balanced Performance\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"PMI","offers":[{"title":"Default Title","offer_id":52562633556286,"sku":"PM-012004","price":26.84,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0962\/4721\/8494\/files\/axlecassettes-pursuit-xpect-bearing-insert-small-pm-012004.jpg?v=1763113296"},{"product_id":"3hbf125-flangette-for-1-25-axle-bearing-3hbf125-3hbf125","title":"Durable Flangette for 1.25-Inch Axle Bearings - Industry Standard Fit","description":"Engineered toughness defines this flangette, providing a solid foundation for 1.25-inch axle bearings in modern kart applications. The bright zinc finish ensures resistance to track grime and moisture, keeping your setup pristine race after race.\u003cp\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eAligns with industry-standard 3 9\/16-inch bolt circle\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSold each\u003c\/strong\u003e—order two for each bearing installation\u003c\/li\u003e\n\u003cli\u003ePromotes smooth rotation, cutting drag for improved speed\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eBy locking bearings in place, it minimizes play that causes inconsistent lap times, allowing you to attack corners with confidence. This helps organize your axle assembly neatly, streamlining maintenance and adjustments for quicker turnaround between heats. SKU: 3HBF125. A must-have for competitors chasing that extra edge in handling and reliability.\u003c\/p\u003e\n\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eQ: How many flangettes do I need for my kart?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eA:\u003c\/strong\u003e These are sold individually. You will need to order two flangettes for each axle bearing installation to ensure the bearing is properly secured on both sides.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: Will this fit my 1.25-inch axle?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eA:\u003c\/strong\u003e Yes, this flangette is specifically engineered for 1.25-inch axle bearings and features an industry-standard 3 9\/16-inch bolt circle for universal compatibility with most modern kart chassis.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: Why is it important to use a high-quality flangette?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eA:\u003c\/strong\u003e A secure flangette locks the bearing in place, minimizing play in the axle assembly. This reduces drag and prevents inconsistent handling, allowing for more precise cornering and improved lap times.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: How do I maintain these flangettes?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eA:\u003c\/strong\u003e The bright zinc finish is designed to resist track grime and moisture. Simply wipe them down during your routine maintenance checks to keep your axle assembly clean and ensure the bolts remain tight between heats.\u003c\/p\u003e\n\n\u003ch3\u003eRelated Products From Vendor\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/1-1-4-aluminum-axle-lock-collar-lc125\"\u003eDurable 1 1\/4 Inch Aluminum Axle Lock Collar for Secure Kart Axle Positioning\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/3hbf1-flangette-for-1-0-axle-bearing-3hbf1-3hbf1\"\u003eSteel Flangette for 1.0-Inch Axle Bearings - Original Three-Bolt Pattern\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/40mm-axle-lock-collar-wide-black-lc40b-wide\"\u003eWide Black 40mm Axle Lock Collar with Shoulder and 8mm Keyslot\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/30mm-axle-lock-collar-lc30mm\"\u003ePrecision 30mm Axle Lock Collar for European-Style Kart Chassis\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/1-axle-lock-collar-lc1\"\u003e1 Inch Two-Piece Axle Lock Collar with Keyway for Kart Precision\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Swift Karting Supplies","offers":[{"title":"Default Title","offer_id":52562646073662,"sku":"3HBF125","price":6.92,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0962\/4721\/8494\/files\/axlecassettes-3hbf125-flangette-for-1-25-axle-bearing-3hbf125-3hbf125.jpg?v=1763113544"},{"product_id":"pm-35-40l10m-adjustable-axle-cassette-for-40mm-pm-35-40l10m","title":"Adjustable Metric Axle Cassette for 40mm Axles and 80mm Bearings","description":"\u003cp\u003eMaster cross adjustments effortlessly with this metric adjustable axle cassette, optimized for 40mm axles and 80mm OD bearings. It adheres to the traditional three-bolt pattern, making it a plug-and-play upgrade for metric chassis seeking tunable performance.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eFor cross adjustment only, with 10mm hardware (not included)\u003c\/li\u003e\n\u003cli\u003eSupports 40 or 50mm axles with 80mm bearings\u003c\/li\u003e\n\u003cli\u003eMultiple positions for customizing lead and grip\u003c\/li\u003e\n\u003cli\u003eHigh-quality construction for lasting precision\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThis cassette allows lateral shifts that fine-tune weight transfer, improving cornering bite without sacrificing straight-line stability—crucial for varied track layouts. It organizes your drive-line with clear mounting points, speeding up config changes during practice. SKU: PM-35-40L10M.\u003c\/p\u003e\u003cp\u003eIn competitive scenes, such adjustability means adapting to conditions on the fly, turning challenging sessions into speed-building opportunities. The robust design handles torque loads, ensuring your investments in setup pay off in consistent, rapid laps. For international racers, it's the tool to unlock chassis potential, fostering organized, efficient race prep that keeps you podium-bound.\u003c\/p\u003e\u003cp\u003eWhether dialing in for slippery surfaces or high-grip asphalt, this piece delivers the flexibility pros rely on for edge-of-limit driving.\u003c\/p\u003e\n\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eQ: Is the mounting hardware included with this axle cassette?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eA:\u003c\/strong\u003e No, the 10mm mounting hardware is not included. This cassette is designed to work with your existing 10mm hardware setup.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: What size bearings does this cassette accommodate?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eA:\u003c\/strong\u003e This adjustable axle cassette is specifically engineered to fit 80mm OD (outside diameter) bearings.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: Can I use this on both 40mm and 50mm axles?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eA:\u003c\/strong\u003e Yes, this unit is versatile and supports both 40mm and 50mm axle sizes, provided you are using the compatible 80mm bearings.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: How does this cassette improve my kart's handling?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eA:\u003c\/strong\u003e By allowing for lateral shifts, this cassette enables you to fine-tune weight transfer. This helps you increase cornering bite on high-grip tracks or adjust for better stability on slippery surfaces without compromising your straight-line speed.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: Is this a direct replacement for my metric chassis?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eA:\u003c\/strong\u003e Yes, it adheres to the traditional three-bolt pattern, making it a plug-and-play upgrade for most metric chassis requiring tunable axle positioning.\u003c\/p\u003e\n\n\u003ch3\u003eRelated Products From Vendor\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/pm-12-40-10-metric-axle-cassette-pm-12-40-10\"\u003eBlack Anodized Metric Axle Cassette for 80mm OD Bearings\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/pm-12sl10-pmi-axiom-cassette-pm-12sl10\"\u003ePMI Axiom Axle Cassette - Versatile Left and Right Fit with Bearing Ring\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/pm-012300r-axle-cassette-2025-style-pm-012300r\"\u003e2025-Style Clamshell Axle Cassette for Smooth Kart Drive-Line Performance\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/braac-adjustable-axle-cassette-braac\"\u003eVersatile Adjustable Axle Cassette for Wedge and Lead Adjustments\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/kmac-1-1-4-cnc-axle-cassettes-each-bearings-sold-separately-kmac\"\u003ePerformance Manufacturing PM-12-3\/8 CNC Axle Cassette - 1 1\/4-Inch - American Karts\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Performance Manufacturing","offers":[{"title":"Default Title","offer_id":52562648662334,"sku":"PM-35-40L10M","price":135.41,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0962\/4721\/8494\/files\/axlecassettes-pm-35-40l10m-adjustable-axle-cassette-for-40mm-pm-35-40l10m.jpg?v=1763113598"},{"product_id":"pc-6730-quick-release-pin-for-2025-cassettes-sold-each-pc-6730","title":"Quick-Release Pin for 2025 Axle Cassettes - Essential Fastener","description":"\u003cp\u003eSpeed up your pit stops with this indispensable quick-release pin tailored for 2025 cassettes—installation and removal become a breeze, saving crucial minutes before the green flag.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSold each, with right cassette requiring 1 and left needing 2\u003c\/li\u003e\n\u003cli\u003eEngineered for Elevate cassettes to ensure rock-solid positioning\u003c\/li\u003e\n\u003cli\u003ePrevents slippage during high-G maneuvers for safer, faster laps\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eIn kart racing, a loose component can spell disaster; this pin locks everything in place, allowing aggressive driving without second-guessing your setup. It streamlines organization at the track, making adjustments for track conditions quicker and more precise. SKU: PC-6730.\u003c\/p\u003e\u003cp\u003eIdeal for teams juggling multiple karts, it promotes efficiency and reliability, directly contributing to better race outcomes through dependable drive-line integrity.\u003c\/p\u003e\n\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eQ: How many quick-release pins do I need for my 2025 axle cassettes?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eA:\u003c\/strong\u003e These pins are sold individually. You will need one pin for the right-side cassette and two pins for the left-side cassette.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: Are these pins compatible with older cassette models?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eA:\u003c\/strong\u003e No, these are specifically engineered for 2025-style cassettes to ensure a precise, rock-solid fit. They are not designed for older or non-compatible cassette versions.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: Why should I use a quick-release pin instead of standard hardware?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eA:\u003c\/strong\u003e Quick-release pins significantly reduce the time required for trackside adjustments. They allow for rapid changes to your setup between sessions without the need for tools, helping you maintain efficiency during a busy race day.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: How do these pins improve kart performance?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eA:\u003c\/strong\u003e By ensuring the cassette is locked securely in place, these pins prevent slippage during high-G cornering. This maintains consistent drive-line integrity, allowing for more aggressive driving and predictable handling.\u003c\/p\u003e\n\n\u003ch3\u003eRelated Products From Vendor\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/pm-012300r-axle-cassette-2025-style-pm-012300r\"\u003e2025-Style Clamshell Axle Cassette for Smooth Kart Drive-Line Performance\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/pm-12sl10-pmi-axiom-cassette-pm-12sl10\"\u003ePMI Axiom Axle Cassette - Versatile Left and Right Fit with Bearing Ring\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/pm-12sl10pc-performance-pill-cover-pm-12sl10pc\"\u003eProtective Performance Pill Cover for Axiom and Xpect Cassettes\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/pm-12ht9bs-performance-small-bearing-sleeve-pm-12ht9bs\"\u003ePerformance Small Bearing Sleeve for Axiom Kart Cassettes\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/pm-12ht9b-performance-big-bearing-sleeve-pm-12ht9b\"\u003ePerformance Big Bearing Sleeve for Axiom Cassettes - 72mm OD Fit\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Performance Manufacturing","offers":[{"title":"Default Title","offer_id":52562656559422,"sku":"PC-6730","price":5.77,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0962\/4721\/8494\/files\/axlecassettes-pc-6730-quick-release-pin-for-2025-cassettes-sold-each-pc-6730.jpg?v=1763113772"},{"product_id":"pm-012300r-axle-cassette-2025-style-pm-012300r","title":"2025-Style Clamshell Axle Cassette for Smooth Kart Drive-Line Performance","description":"\u003cp\u003eRevolutionize your kart's rear-end setup with this innovative 2025-style axle cassette, engineered for seamless integration without the hassle of pills. The clamshell configuration allows for straightforward assembly, reducing track-side adjustments and letting you concentrate on pushing the limits of speed.\u003c\/p\u003e\u003cp\u003ePrecision matters in karting— this cassette's dual-sided caliper pockets and alignment marks ensure exact positioning, minimizing vibrations that rob you of precious tenths. Paired with UC-206 bearings (order separately via PM-012004), it supports smoother axle rotation, translating to tighter turns and quicker acceleration out of corners.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eClamshell style eliminates pill needs for cleaner, faster installs\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eBearing ring not included\u003c\/b\u003e—pair with PM-012004 for optimal fit\u003c\/li\u003e\n\u003cli\u003eUse PC-6730 pin (sold separately) for secure locating\u003c\/li\u003e\n\u003cli\u003eVersatile marks on both sides for left\/right symmetry\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eFor racers battling for podiums, this component organizes your drive-line components efficiently, cutting prep time and boosting confidence in your setup's durability. Whether fine-tuning wedge or lead, it delivers the stability needed for consistent, high-speed performance. SKU: PM-012300R. Transform your kart into a track-dominating machine.\u003c\/p\u003e\u003cp\u003eBuilt from high-quality materials, it withstands intense racing conditions, helping maintain peak efficiency lap after lap. Integrate it into your chassis for that edge in handling that separates winners from the pack.\u003c\/p\u003e\n\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eQ: Does this axle cassette come with bearings?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eA:\u003c\/strong\u003e No, this cassette does not include bearings. It is designed to be paired with UC-206 bearings, which can be ordered separately using part number PM-012004.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: Why is the clamshell design better than traditional pill-style cassettes?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eA:\u003c\/strong\u003e The clamshell configuration eliminates the need for individual pills, allowing for a much faster and cleaner installation. This design simplifies your track-side adjustments, saving you time and ensuring a more secure fit.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: What additional hardware do I need for installation?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eA:\u003c\/strong\u003e To ensure a secure setup, you will need to use the PC-6730 pin for locating, which is sold separately. We also recommend ensuring you have the correct UC-206 bearings on hand before beginning your installation.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: How do the alignment marks help with my kart setup?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eA:\u003c\/strong\u003e The dual-sided alignment marks provide left\/right symmetry, allowing for precise positioning of your axle. This accuracy minimizes vibrations and ensures your drive-line is perfectly square, which is critical for consistent handling and speed.\u003c\/p\u003e\n\n\u003ch3\u003eRelated Products From Vendor\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/pm-12sl10-pmi-axiom-cassette-pm-12sl10\"\u003ePMI Axiom Axle Cassette - Versatile Left and Right Fit with Bearing Ring\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/pm-12-40-10-metric-axle-cassette-pm-12-40-10\"\u003eBlack Anodized Metric Axle Cassette for 80mm OD Bearings\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/kmac-1-1-4-cnc-axle-cassettes-each-bearings-sold-separately-kmac\"\u003ePerformance Manufacturing PM-12-3\/8 CNC Axle Cassette - 1 1\/4-Inch - American Karts\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/braac-adjustable-axle-cassette-braac\"\u003eVersatile Adjustable Axle Cassette for Wedge and Lead Adjustments\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/pm-35-40l10m-adjustable-axle-cassette-for-40mm-pm-35-40l10m\"\u003eAdjustable Metric Axle Cassette for 40mm Axles and 80mm Bearings\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Performance Manufacturing","offers":[{"title":"Default Title","offer_id":52562657902910,"sku":"PM-012300R","price":61.61,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0962\/4721\/8494\/files\/axlecassettes-pm-012300r-axle-cassette-2025-style-pm-012300r.jpg?v=1763113803"},{"product_id":"pm-12-40-10-metric-axle-cassette-pm-12-40-10","title":"Black Anodized Metric Axle Cassette for 80mm OD Bearings","description":"Metric precision shines in this PM-12-40-10 axle cassette, black anodized for a sleek, corrosion-resistant finish that handles track abuse effortlessly. Designed for 80mm OD bearings, it requires 10mm hardware (sold separately) to lock in your axle setup securely.\u003cp\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eBlack anodizing for durability and easy maintenance\u003c\/li\u003e\n\u003cli\u003eFits 80mm bearings ideal for 40mm or 50mm axles\u003c\/li\u003e\n\u003cli\u003eStreamlines metric chassis like Margay Ignite\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eHardware not included\u003c\/b\u003e—pair with 10mm bolts for installation\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThis cassette reduces binding points, allowing freer axle spin that translates to less energy loss and more speed through the gears. For international kart formats, it organizes components neatly, facilitating quick swaps between sessions. SKU: PM-12-40-10.\u003c\/p\u003e\u003cp\u003eExperience the difference in how your kart corners—tighter, more predictable response thanks to stable bearing housing. It's a go-to for racers optimizing for endurance, where every gram of efficiency counts toward faster, more organized race days.\u003c\/p\u003e\n\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eQ: What size bearings does this axle cassette accommodate?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eA:\u003c\/strong\u003e This cassette is precision-engineered to fit 80mm outer diameter (OD) bearings, making it a versatile choice for various karting setups.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: Is the mounting hardware included with the cassette?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eA:\u003c\/strong\u003e No, the hardware is sold separately. You will need to provide 10mm bolts to securely install the cassette to your chassis.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: Why should I choose a black anodized finish for my axle cassette?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eA:\u003c\/strong\u003e The black anodized finish provides a sleek look while offering superior corrosion resistance, ensuring the part stands up to the harsh conditions of the track and requires less maintenance over time.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: Will this cassette fit my Margay Ignite kart?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eA:\u003c\/strong\u003e Yes, this unit is designed to streamline metric chassis setups, including the Margay Ignite, helping to reduce binding points for freer axle rotation.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: How does this cassette improve my kart's handling?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eA:\u003c\/strong\u003e By providing a more stable bearing housing, this cassette reduces binding and energy loss. This results in a tighter, more predictable cornering response and improved efficiency through the gears.\u003c\/p\u003e\n\n\u003ch3\u003eRelated Products From Vendor\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/pm-35-40l10m-adjustable-axle-cassette-for-40mm-pm-35-40l10m\"\u003eAdjustable Metric Axle Cassette for 40mm Axles and 80mm Bearings\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/pm-12sl10-pmi-axiom-cassette-pm-12sl10\"\u003ePMI Axiom Axle Cassette - Versatile Left and Right Fit with Bearing Ring\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/pm-012300r-axle-cassette-2025-style-pm-012300r\"\u003e2025-Style Clamshell Axle Cassette for Smooth Kart Drive-Line Performance\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/kmac-1-1-4-cnc-axle-cassettes-each-bearings-sold-separately-kmac\"\u003ePerformance Manufacturing PM-12-3\/8 CNC Axle Cassette - 1 1\/4-Inch - American Karts\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/pm-12sl10pc-performance-pill-cover-pm-12sl10pc\"\u003eProtective Performance Pill Cover for Axiom and Xpect Cassettes\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Performance Manufacturing","offers":[{"title":"Default Title","offer_id":52562659279166,"sku":"PM-12-40-10","price":42.78,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0962\/4721\/8494\/files\/axlecassettes-pm-12-40-10-metric-axle-cassette-pm-12-40-10.jpg?v=1763113843"},{"product_id":"pm-12ht9b-performance-big-bearing-sleeve-pm-12ht9b","title":"Performance Big Bearing Sleeve for Axiom Cassettes - 72mm OD Fit","description":"\u003cul\u003e\n\u003cli\u003eSpecifically for Axiom cassette PM-12SL10\u003c\/li\u003e\n\u003cli\u003eDesigned for 72mm OD big bearings to handle higher loads\u003c\/li\u003e\n\u003cli\u003eBoosts axle stability without compromising weight\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eStruggling with bearing play in demanding races? This sleeve fits snugly into your Axiom setup, accommodating larger 72mm OD bearings for enhanced durability and reduced deflection under power.\u003c\/p\u003e\u003cp\u003eIt transforms standard cassettes into high-performance units, ensuring your axle stays centered for optimal tire contact and quicker direction changes. Organizing your drive-line becomes simpler with this targeted adapter, minimizing custom fab work. SKU: PM-12HT9B.\u003c\/p\u003e\u003cp\u003ePerformance-focused teams use it to fine-tune rear-end geometry, gaining that elusive edge in traction-limited scenarios. Reliable and straightforward, it helps maintain speed consistency lap after lap.\u003c\/p\u003e\n\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eQ: What specific cassette is this sleeve designed for?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eA:\u003c\/strong\u003e This sleeve is precision-engineered specifically for the PMI Axiom Axle Cassette (PM-12SL10) to ensure a perfect fit and optimal performance.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: Why should I upgrade to a 72mm OD bearing?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eA:\u003c\/strong\u003e Upgrading to 72mm OD bearings helps handle higher loads and reduces axle deflection under power, which is critical for maintaining stability and consistent tire contact during demanding races.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: Does this sleeve require custom fabrication to install?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eA:\u003c\/strong\u003e No. This sleeve is designed as a targeted adapter that fits snugly into your existing Axiom setup, allowing you to upgrade your drive-line without the need for custom fabrication.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: How does this sleeve affect my kart's handling?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eA:\u003c\/strong\u003e By reducing bearing play and keeping the axle centered, this sleeve improves your kart's ability to handle quicker direction changes and provides better traction in limited-grip scenarios.\u003c\/p\u003e\n\n\u003ch3\u003eRelated Products From Vendor\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/pm-12sl10-pmi-axiom-cassette-pm-12sl10\"\u003ePMI Axiom Axle Cassette - Versatile Left and Right Fit with Bearing Ring\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/pm-12ht9bs-performance-small-bearing-sleeve-pm-12ht9bs\"\u003ePerformance Small Bearing Sleeve for Axiom Kart Cassettes\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/pm-12sl10pc-performance-pill-cover-pm-12sl10pc\"\u003eProtective Performance Pill Cover for Axiom and Xpect Cassettes\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/pm-012300r-axle-cassette-2025-style-pm-012300r\"\u003e2025-Style Clamshell Axle Cassette for Smooth Kart Drive-Line Performance\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Performance Manufacturing","offers":[{"title":"Default Title","offer_id":52562659311934,"sku":"PM-12HT9B","price":29.83,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0962\/4721\/8494\/files\/axlecassettes-pm-12ht9b-performance-big-bearing-sleeve-pm-12ht9b.jpg?v=1763113845"},{"product_id":"pm-12ht9bs-performance-small-bearing-sleeve-pm-12ht9bs","title":"Performance Small Bearing Sleeve for Axiom Kart Cassettes","description":"Compact power lies in this performance small bearing sleeve, exclusively for Axiom cassettes (PM-12SL10), allowing precise integration of smaller bearings to sharpen your kart's response.\u003cp\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eEnhances fit for small bearings in high-precision setups\u003c\/li\u003e\n\u003cli\u003eReduces slop for truer axle tracking\u003c\/li\u003e\n\u003cli\u003eSupports faster, more agile cornering\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eWhere space is tight, this sleeve ensures bearings seat perfectly, cutting vibrations that slow you down. It aids in organizing lightweight drive-line configs, perfect for agility-focused classes. SKU: PM-12HT9BS.\u003c\/p\u003e\u003cp\u003eRacers note improved consistency in lap times after installation, as it promotes even wear and efficient power flow. A simple upgrade yielding big gains in track feel and speed.\u003c\/p\u003e\n\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eQ: What is the primary purpose of the Performance Small Bearing Sleeve?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eA:\u003c\/strong\u003e This sleeve is designed to allow for the precise integration of smaller bearings into your Axiom kart cassettes. It reduces internal slop, ensures a perfect seat for the bearing, and minimizes vibrations for smoother axle tracking.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: Is this sleeve compatible with all kart cassettes?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eA:\u003c\/strong\u003e No, this sleeve is specifically engineered for use with the PMI Axiom Kart Cassettes (PM-12SL10). It is not intended for use with other cassette models.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: How does this sleeve improve my kart's performance?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eA:\u003c\/strong\u003e By ensuring the bearing is seated perfectly and reducing movement within the cassette, the sleeve promotes more efficient power flow and even bearing wear. Racers often notice improved agility in corners and more consistent lap times after installation.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: Do I need special tools to install this bearing sleeve?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eA:\u003c\/strong\u003e Installation is straightforward and typically does not require specialized tools. Ensure your Axiom cassette is clean and free of debris before sliding the sleeve into place to ensure a snug, vibration-free fit.\u003c\/p\u003e\n\n\u003ch3\u003eRelated Products From Vendor\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/pm-12sl10-pmi-axiom-cassette-pm-12sl10\"\u003ePMI Axiom Axle Cassette - Versatile Left and Right Fit with Bearing Ring\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/pm-12ht9b-performance-big-bearing-sleeve-pm-12ht9b\"\u003ePerformance Big Bearing Sleeve for Axiom Cassettes - 72mm OD Fit\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/pm-12sl10pc-performance-pill-cover-pm-12sl10pc\"\u003eProtective Performance Pill Cover for Axiom and Xpect Cassettes\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/pm-012300r-axle-cassette-2025-style-pm-012300r\"\u003e2025-Style Clamshell Axle Cassette for Smooth Kart Drive-Line Performance\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/carbon-fiber-spacer-kit-cfsk\"\u003eVersatile Carbon Fiber Spacer Kit for 1.25\" Kart Axles\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Performance Manufacturing","offers":[{"title":"Default Title","offer_id":52562659377470,"sku":"PM-12HT9BS","price":29.83,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0962\/4721\/8494\/files\/axlecassettes-pm-12ht9bs-performance-small-bearing-sleeve-pm-12ht9bs.jpg?v=1763113846"},{"product_id":"prc-lr-tsi-replacement-lube-ring-for-triton-seraph-and-icon-fits-small-uc-206-bearing-only-bw-prclr-tsi","title":"TSI-Compatible Replacement Lube Ring for Triton, Seraph, Icon Karts","description":"\u003cp\u003eTargeted restoration for legacy kart models starts here, with a lube ring built for specific older configurations.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eExclusive compatibility with small UC-206 bearings—double-check your setup to avoid mismatches.\u003c\/li\u003e\n\u003cli\u003eDesigned for Triton, Seraph, and Icon chassis using pre-2017 Phantom cassettes.\u003c\/li\u003e\n\u003cli\u003eBearing excluded, promoting flexible upgrades tailored to your kart's needs.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThis piece reinstates smooth rotation by delivering consistent lubrication, countering the wear from years of racing. It directly aids speed by reducing resistance in the axle assembly, allowing more power to reach the wheels for those critical overtakes.\u003c\/p\u003e\u003cp\u003eSold as singles, it fits neatly into your maintenance routine, aiding pit organization without excess inventory. Reference SKU BW-PRCLR-TSI for precise ordering.\u003c\/p\u003e\u003cp\u003eUsers note improved thermal management, as the ring prevents dry spots that lead to binding—vital for endurance events. For vintage kart enthusiasts, it's a cost-effective way to keep classics competitive, blending reliability with modern lubrication tech.\u003c\/p\u003e\n\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eQ: How do I know if this lube ring is compatible with my kart?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eA:\u003c\/strong\u003e This ring is specifically designed for Triton, Seraph, and Icon chassis using pre-2017 Phantom cassettes. It is exclusively compatible with small UC-206 bearings. Please verify your bearing size and cassette type before ordering to ensure a proper fit.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: Does this product include the bearing?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eA:\u003c\/strong\u003e No, the bearing is excluded. This product is a replacement lube ring only, allowing you to upgrade or replace the ring while retaining your existing bearing setup.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: Why is a lube ring important for my axle assembly?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eA:\u003c\/strong\u003e The lube ring ensures consistent lubrication to the bearing, which reduces rotational resistance and prevents dry spots that lead to binding. This is essential for maintaining speed and improving thermal management during long endurance races.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: Is this sold as a set or individually?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eA:\u003c\/strong\u003e This item is sold as a single unit, making it easy to order exactly what you need for your specific maintenance or repair requirements.\u003c\/p\u003e\n\n\u003ch3\u003eRelated Products From Vendor\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/prc-ck-phantom-style-cassette-kit-prc-ck\"\u003eComplete Phantom Style Cassette Kit for Kart Drivelines\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/prc-cp-cassette-alignment-pin-sold-each-prc-cp\"\u003ePrecision Cassette Alignment Pin for Kart Axles\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"PRC","offers":[{"title":"Default Title","offer_id":52562665210174,"sku":"BW-PRCLR-TSI","price":27.28,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0962\/4721\/8494\/files\/axlecassettes-prc-lr-tsi-replacement-lube-ring-for-triton-seraph-and-icon-fits-small-uc-206-bearing-only-bw-prclr-tsi.jpg?v=1763113978"},{"product_id":"kmac-split-style-axle-cassettes-sold-as-a-pair-pr-skmac","title":"Split-Style CNC Axle Cassettes Pair for 1 1\/4-Inch Bearings in Karts","description":"Tackle drive-line upgrades efficiently with this pair of split-style KMAC cassettes, CNC-machined from billet aluminum to fit 1 1\/4-inch free spin bearings. The split design facilitates easier bearing access, ideal for quick maintenance that keeps you on the track longer.\u003cp\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSold as a pair\u003c\/strong\u003e for balanced left\/right installation\u003c\/li\u003e\n\u003cli\u003eBearings and mounting bolts sold separately\u003c\/li\u003e\n\u003cli\u003eFits most American karts, ensuring compatibility\u003c\/li\u003e\n\u003cli\u003eNote: Split style as temporary inventory for standard PMI cassettes\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThis setup reduces rotational drag, allowing your axle to spin freer and deliver power more directly to the tires—resulting in snappier throttle response and faster sector times. For teams, the paired format simplifies organization, ensuring symmetry that prevents handling quirks. SKU: PR-SKMAC.\u003c\/p\u003e\u003cp\u003eEven in high-stakes races, the durable billet material holds up, maintaining precision under load. It's a smart choice for racers who value speed without the wait for backordered parts, organizing your rear end for peak efficiency.\u003c\/p\u003e\n\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eQ: Why should I choose a split-style axle cassette over a standard one?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eA:\u003c\/strong\u003e The split-style design allows for significantly easier bearing access. Instead of removing the entire axle assembly to service or replace a bearing, you can simply open the cassette, saving you valuable time during race day maintenance.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: Are these cassettes compatible with all kart axles?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eA:\u003c\/strong\u003e These KMAC cassettes are specifically designed for 1 1\/4-inch bearings and are compatible with most American-style karts. Please verify your axle diameter before purchasing to ensure a proper fit.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: Do these cassettes come with the bearings and mounting hardware?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eA:\u003c\/strong\u003e No, the bearings and mounting bolts are sold separately. This pair includes the two CNC-machined billet aluminum cassette halves required for a balanced left\/right installation.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: How does this upgrade improve my kart's performance?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eA:\u003c\/strong\u003e By utilizing high-quality CNC-machined billet aluminum, these cassettes provide a rigid, precise housing for your bearings. This reduces rotational drag, allowing your axle to spin more freely, which results in snappier throttle response and improved power transfer to the tires.\u003c\/p\u003e\n\n\u003ch3\u003eRelated Products From Vendor\u003c\/h3\u003e\n\u003cp\u003e\u003ca href=\"\/products\/kmacp-1-1-4-cnc-axle-cassette-for-big-bearings-each-bearings-sold-seperatly-kmacp\"\u003e1 1\/4-Inch CNC Axle Cassette for Big Bearings - Sold Each\u003c\/a\u003e\u003c\/p\u003e","brand":"KMAC","offers":[{"title":"Default Title","offer_id":52562685100350,"sku":"PR-SKMAC","price":54.73,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0962\/4721\/8494\/files\/axlecassettes-kmac-split-style-axle-cassettes-sold-as-a-pair-pr-skmac.jpg?v=1763114308"},{"product_id":"prc-lr-replacement-lube-ring-prc-lr","title":"Phantom Racing Chassis PRC-LR Replacement Lube Ring - Post-2017 Cassettes - Oval Karting","description":"\u003cp\u003ePrecision engineering in your racing parts dictates the line between a podium finish and a DNF, especially when dealing with high-stress driveline components. The Phantom Racing Chassis (PRC) Replacement Lube Ring is engineered to deliver bulletproof reliability for post-2017 Phantom cassettes, Chargers, and Hammer Karts. Axle bearings take immense lateral loads during high-speed cornering. This precision-machined lube ring ensures grease stays exactly where it is needed, preventing catastrophic bearing failure and minimizing rolling resistance. Just as you wouldn't compromise on racing helmets for driver safety, you shouldn't compromise on cassette lubrication for chassis reliability.\u003c\/p\u003e\u003ch2\u003eIntegrating with Go Kart Transmissions and Drivelines\u003c\/h2\u003e\u003cp\u003eYour driveline's efficiency is only as strong as its weakest link. While much attention is given to go kart transmissions and clutches, the axle cassette bearings are where horsepower is either translated to the track or lost to friction. This replacement lube ring addresses wear from high-mileage sessions, restoring optimal lubrication that cuts drag and boosts mechanical efficiency. The result is faster acceleration out of the apex without the parasitic drag of unlubricated, overheating parts. In practice, a well-lubed ring means significantly less heat generation, preserving bearing integrity over long hauls and minimizing costly downtime in the pits.\u003c\/p\u003e\u003ch2\u003eEssential for Any Go Kart Chassis For Sale or Active Roster\u003c\/h2\u003e\u003cp\u003eWhether you are prepping a used go kart chassis for sale or maintaining your primary race day rig, swapping out worn lube rings is mandatory preventative maintenance. For racers juggling multiple karts, this modularity aids in quick swaps, keeping your focus on winning strategies rather than mechanical woes. When you are dialing in your exact setup, adjusting your stagger, and mounting the best go kart tires for racing, ensuring your rear axle spins freely without binding is the final step to maximizing your straight-line speed and corner exit momentum.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDirect Fitment:\u003c\/strong\u003e Engineered specifically for post-2017 Phantom cassettes to guarantee a flawless, leak-free seal.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBroad Compatibility:\u003c\/strong\u003e Works seamlessly with 2017+ Charger chassis and modern Hammer Karts.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFriction Reduction:\u003c\/strong\u003e Traps essential lubrication against the bearing to drastically cut rolling resistance.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThermal Management:\u003c\/strong\u003e Lowers operating temperatures in the axle assembly, extending bearing lifespan.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eModular Design:\u003c\/strong\u003e Bearing is not included, allowing racers to pair this ring with their exact bearing specifications.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh-Mileage Durability:\u003c\/strong\u003e Machined to withstand the harsh vibrations and lateral G-forces of competitive oval racing.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSimplified Maintenance:\u003c\/strong\u003e Sold individually for targeted, cost-effective driveline repairs and inventory tracking.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eQ: Is this lube ring compatible with pre-2017 Phantom Racing Chassis cassettes?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eA:\u003c\/strong\u003e No, this specific component is precision-engineered exclusively for post-2017 Phantom cassettes, including the Charger and Hammer models. Using it on older cassettes may result in an improper seal.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: Does this product include the axle bearing?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eA:\u003c\/strong\u003e No, the lube ring is sold individually. This modular design allows you to pair the ring with your preferred bearing specifications while replacing only the worn-out lubrication component.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: How often should I replace my axle lube rings?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eA:\u003c\/strong\u003e We recommend inspecting your lube rings during every major chassis service or whenever you perform a bearing swap. If you notice signs of wear, heat damage, or if the ring no longer maintains a tight seal, it should be replaced immediately to prevent bearing failure and parasitic drag.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: Will this help with my kart's straight-line speed?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eA:\u003c\/strong\u003e Yes. By ensuring your axle bearings remain properly lubricated and reducing friction, this ring minimizes rolling resistance. This allows more of your engine's horsepower to reach the track, improving both acceleration and top-end speed.\u003c\/p\u003e\n\n\u003ch3\u003eRelated Products From Vendor\u003c\/h3\u003e\n\u003cp\u003e\u003ca href=\"\/products\/prc-cbk-prc-style-cassette-bolt-kit-prc-cbk\"\u003ePhantom Racing Chassis PRC Style Cassette Bolt Kit - 5\/16-24 Drilled Hardware - Universal Fit\u003c\/a\u003e\u003c\/p\u003e","brand":"Phantom Racing Chassis","offers":[{"title":"Default Title","offer_id":52562686705982,"sku":"PRC-LR","price":28.83,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0962\/4721\/8494\/files\/axlecassettes-prc-lr-replacement-lube-ring-prc-lr.jpg?v=1763114337"},{"product_id":"pm-35phe-adjustable-axle-cassette-for-5-16-18-hardware-small-bearing-pm-35phe","title":"Performance Manufacturing PRC Phenom Adjustable Axle Cassette - 5\/16-18 \/ 62mm OD - Oval Racing","description":"When you're searching local \u003cstrong\u003ego kart stores\u003c\/strong\u003e for the ultimate chassis tuning advantage, the Performance Manufacturing PM-35PHE Adjustable Axle Cassette delivers unmatched precision for your PRC Phenom or Nemesis chassis. Designed specifically for competitive oval racing, this split aluminum cassette allows you to manipulate cross-weight on the left side or fine-tune axle lead on the right side in clearly marked increments. Instead of settling for static setups, you can adapt to track evolution instantly.\n\n\u003ch2\u003ePrecision Tuning for Carb Engines and Belt Engine Setups\u003c\/h2\u003e\nTo extract maximum grip and corner speed, your rear axle geometry must be flawless. The PM-35PHE features a rugged dovetail slide mechanism that ensures absolute rigidity under heavy lateral loads. Whether you're running high-horsepower \u003cstrong\u003ecarb engines\u003c\/strong\u003e or a high-torque \u003cstrong\u003ebelt engine\u003c\/strong\u003e configuration, this cassette maintains perfect alignment. By utilizing 5\/16-18 mounting hardware tailored for small 62mm OD bearings (1-1\/4\" or 30mm ID), it integrates seamlessly with traditional welded hangers on Phantom chassis (excluding Phenom ES2).\n\n\u003ch2\u003eKeep Parts New and Maximize Grip\u003c\/h2\u003e\nDialing in your kart is about synergy. When you pair this adjustable cassette with the \u003cstrong\u003ebest go kart tires for racing\u003c\/strong\u003e, you create a mechanical grip advantage that prevents mid-corner understeer and corner-exit snap oversteer. Keeping your \u003cstrong\u003eparts new\u003c\/strong\u003e and your chassis highly adjustable means you spend less time wrestling the kart and more time hitting your marks. The black anodized billet aluminum construction not only looks factory-fresh but provides the durability needed for aggressive, race-long consistency.\n\n\u003ch2\u003eTechnical Specifications \u0026amp; Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eChassis Compatibility:\u003c\/strong\u003e Direct fit for PRC Phantom Phenom and Nemesis chassis with traditional welded hangers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBearing Sizing:\u003c\/strong\u003e Engineered specifically for small 62mm OD bearings (1-1\/4\" or 30mm ID).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHardware Specs:\u003c\/strong\u003e Includes robust 5\/16-18 threaded mounting hardware for secure fastening.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDovetail Slide Design:\u003c\/strong\u003e Interlocking slide mechanism adds superior structural strength under load.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMarked Increments:\u003c\/strong\u003e Laser-etched adjustment lines for rapid, repeatable cross-weight and axle lead changes.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBillet Aluminum Build:\u003c\/strong\u003e Lightweight yet incredibly strong, finished in a protective black anodize.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDynamic Adjustability:\u003c\/strong\u003e Enhances vertical and horizontal axle positioning without requiring a chassis swap.\u003c\/li\u003e\n\u003c\/ul\u003e\nStop letting hardware limitations dictate your setup sheet. Equip your PRC chassis with the PM-35PHE and gain the mechanical edge required to dominate the hairpins and secure your spot on the podium.\n\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eQ: Is the PM-35PHE compatible with all Phantom chassis?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eA:\u003c\/strong\u003e This cassette is a direct fit for PRC Phantom Phenom and Nemesis chassis that utilize traditional welded hangers. Please note that it is not compatible with the Phenom ES2 chassis.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: What bearing size does this axle cassette require?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eA:\u003c\/strong\u003e The PM-35PHE is engineered specifically for small 62mm OD bearings, which typically accommodate 1-1\/4\" or 30mm ID axles.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: How does the dovetail slide design improve my kart's performance?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eA:\u003c\/strong\u003e The interlocking dovetail slide mechanism provides superior structural rigidity under heavy lateral loads. This ensures your axle geometry remains consistent during high-speed cornering, preventing unwanted flex that can lead to handling inconsistencies.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: Can I use this to adjust my cross-weight?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eA:\u003c\/strong\u003e Yes. The cassette features laser-etched adjustment lines that allow you to manipulate cross-weight on the left side or fine-tune axle lead on the right side in precise, repeatable increments.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: Does this cassette come with the necessary mounting hardware?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eA:\u003c\/strong\u003e Yes, the unit includes robust 5\/16-18 threaded mounting hardware designed for secure fastening to your chassis hangers.\u003c\/p\u003e\n\n\u003ch3\u003eRelated Products From Vendor\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/pm-12sl10-pmi-axiom-cassette-pm-12sl10\"\u003ePMI Axiom Axle Cassette - Versatile Left and Right Fit with Bearing Ring\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/braac-adjustable-axle-cassette-braac\"\u003eVersatile Adjustable Axle Cassette for Wedge and Lead Adjustments\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/pm-012300r-axle-cassette-2025-style-pm-012300r\"\u003e2025-Style Clamshell Axle Cassette for Smooth Kart Drive-Line Performance\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/kmac-1-1-4-cnc-axle-cassettes-each-bearings-sold-separately-kmac\"\u003ePerformance Manufacturing PM-12-3\/8 CNC Axle Cassette - 1 1\/4-Inch - American Karts\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/pm-12ht9bs-performance-small-bearing-sleeve-pm-12ht9bs\"\u003ePerformance Small Bearing Sleeve for Axiom Kart Cassettes\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Performance Manufacturing","offers":[{"title":"Default Title","offer_id":52562708857150,"sku":"PM-35PHE","price":102.54,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0962\/4721\/8494\/files\/axlecassettes-pm-35phe-adjustable-axle-cassette-for-5-16-18-hardware-small-bearing-pm-35phe.jpg?v=1763114651"},{"product_id":"axle-bearing-cassette-bolt-kit-includes-3-bolts-3-lock-washers-3-washers-cbk","title":"Complete Axle Bearing Cassette Bolt Kit with Bolts, Lock Washers, and Washers","description":"\u003cstrong\u003eDon't let loose hardware derail your race\u003c\/strong\u003e—this comprehensive bolt kit equips you with everything needed for a tight, secure cassette mounting. The included lock washers prevent loosening under high torque, while standard washers distribute load evenly for durability.\u003cp\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e3 high-strength bolts for robust fastening\u003c\/li\u003e\n\u003cli\u003e3 lock washers to resist vibrations\u003c\/li\u003e\n\u003cli\u003e3 flat washers for balanced pressure\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eIdeal for axle cassette installations, it streamlines your workflow, reducing the risk of mid-race failures and allowing focus on technique for quicker laps. Organized kits like this keep your pit area efficient, making last-minute tweaks a snap. SKU: CBK. Invest in reliability that translates to podium finishes.\u003c\/p\u003e\n\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eQ: Why is it important to use lock washers on my axle cassette?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eA:\u003c\/strong\u003e Karting generates significant high-frequency vibrations. Lock washers are essential in this Axle Hardware kit because they provide the necessary tension to prevent bolts from backing out during a race, ensuring your cassette remains securely mounted.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: How often should I replace my axle cassette bolts?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eA:\u003c\/strong\u003e It is recommended to inspect your hardware after every race weekend. If you notice any signs of thread wear, stretching, or corrosion, you should replace the bolts immediately to prevent mid-race mechanical failure.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: Can I use these bolts for other parts of the kart?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eA:\u003c\/strong\u003e While these are high-strength bolts, they are specifically curated for axle bearing cassette installations. Always ensure the length and thread pitch match the manufacturer's specifications for any other component before using them elsewhere on your chassis.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: Should I use thread locker with this kit?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eA:\u003c\/strong\u003e While the included lock washers are designed to resist vibration, many racers choose to add a small drop of medium-strength thread locker for extra peace of mind, especially on high-vibration tracks.\u003c\/p\u003e","brand":"Kart Supplies","offers":[{"title":"Default Title","offer_id":52562713510206,"sku":"CBK","price":3.6,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0962\/4721\/8494\/files\/axlecassettes-axle-bearing-cassette-bolt-kit-includes-3-bolts-3-lock-washers-3-washers-cbk.jpg?v=1763114694"},{"product_id":"prc-cbk-prc-style-cassette-bolt-kit-prc-cbk","title":"Phantom Racing Chassis PRC Style Cassette Bolt Kit - 5\/16-24 Drilled Hardware - Universal Fit","description":"\u003cp\u003eWhen you're sourcing elite \u003cstrong\u003ecart parts\u003c\/strong\u003e to shave tenths off your lap time, securing your driveline is non-negotiable. The Phantom Racing Chassis (PRC) Style Cassette Bolt Kit delivers the rock-solid axle-to-chassis connection required to handle the brutal torque of high-output \u003cstrong\u003eracing engines\u003c\/strong\u003e. Whether you are building a fresh rig from a \u003cstrong\u003ego karts frame for sale\u003c\/strong\u003e or upgrading your current setup, this kit guarantees your axle cassette stays exactly where you set it.\u003c\/p\u003e\n\n\u003ch2\u003eEliminate Driveline Deflection\u003c\/h2\u003e\n\u003cp\u003eTrack vibrations and aggressive cornering loads can rattle standard hardware loose, causing catastrophic binding or chain derailment. Designed for Buck Wild or OEM PRC cassettes, this bolt kit features precision-drilled fasteners that accept safety pins, ensuring your hardware remains torqued to spec from the green flag to the checkered. By eliminating cassette play, you maximize power transfer from the sprocket to the tires, ensuring that every ounce of horsepower generated by your \u003cstrong\u003eengine pistons\u003c\/strong\u003e reaches the track surface. When you are pushing the limits of grip, you need absolute confidence that your axle assembly won't shift under heavy braking or acceleration.\u003c\/p\u003e\n\n\u003ch2\u003ePrecision Hardware for Pit Lane Efficiency\u003c\/h2\u003e\n\u003cp\u003eQuick adjustments in the pits win races. This kit streamlines your workflow, providing perfectly matched components that distribute load evenly across the cassette housing. You won't waste time digging through bins for the right washer or safety pin; SKU PRC-CBK gives you the complete package to lock everything down fast. If you've recently picked up a bare \u003cstrong\u003ego kart frame for sale\u003c\/strong\u003e, this is the exact hardware you need to mount your axle cassettes properly and safely the first time.\u003c\/p\u003e\n\n\u003ch2\u003eKey Performance Specifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrilled 5\/16-24 Fasteners:\u003c\/strong\u003e Four high-tensile bolts engineered to withstand extreme shear forces and accept safety wire or pins.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMatched Hex Nuts:\u003c\/strong\u003e Four precision-threaded nuts that provide maximum clamping force without stripping or backing out.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLoad-Distributing Washers:\u003c\/strong\u003e Eight heavy-duty washers designed to prevent galling and evenly spread clamping pressure across the cassette.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVibration-Proof Safety Pins:\u003c\/strong\u003e Four quick-release safety pins that lock the nuts in place, completely eliminating the risk of loosening mid-race.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePRC \u0026amp; Buck Wild Compatibility:\u003c\/strong\u003e Engineered specifically for seamless integration with OEM Phantom Racing Chassis and Buck Wild axle cassettes.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOptimized Power Transfer:\u003c\/strong\u003e Prevents axle shift under load, ensuring perfect chain alignment and maximum drive off the corner.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCorrosion-Resistant Finish:\u003c\/strong\u003e Treated to withstand track debris, moisture, and harsh cleaning chemicals used in the pits.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eQ: Why are the bolts in this kit drilled?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eA:\u003c\/strong\u003e The 5\/16-24 bolts are precision-drilled to accept safety pins or safety wire. This is a critical safety feature in karting that prevents the nuts from backing off due to high-frequency track vibrations, ensuring your axle cassette remains locked in position throughout the race.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: Is this kit compatible with non-PRC chassis?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eA:\u003c\/strong\u003e While this kit is specifically engineered for OEM Phantom Racing Chassis and Buck Wild axle cassettes, the 5\/16-24 sizing is a common standard. However, we recommend verifying your cassette housing thickness to ensure the included hardware provides the correct thread engagement for your specific setup.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: How often should I replace my axle hardware?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eA:\u003c\/strong\u003e You should inspect your axle hardware for signs of stretching, thread wear, or corrosion after every race weekend. If you notice any play in the cassette or if the threads show signs of galling, replace the hardware immediately to prevent chain derailment or catastrophic axle failure.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: Do I need special tools to install this kit?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eA:\u003c\/strong\u003e No special tools are required. You will need standard wrenches or sockets to torque the 5\/16-24 nuts to your chassis manufacturer's specifications. The included safety pins are designed for quick, tool-free installation in the pits.\u003c\/p\u003e\n\n\u003ch3\u003eRelated Products From Vendor\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/prc-lr-replacement-lube-ring-prc-lr\"\u003ePhantom Racing Chassis PRC-LR Replacement Lube Ring - Post-2017 Cassettes - Oval Karting\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Phantom Racing Chassis","offers":[{"title":"Default Title","offer_id":52562723176766,"sku":"PRC-CBK","price":11.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0962\/4721\/8494\/files\/axlecassettes-prc-cbk-prc-style-cassette-bolt-kit-prc-cbk.jpg?v=1763114780"},{"product_id":"pm-12sl10pc-performance-pill-cover-pm-12sl10pc","title":"Protective Performance Pill Cover for Axiom and Xpect Cassettes","description":"Guard against track hazards with this pill cover, designed to fit seamlessly over Axiom or Xpect cassettes—three are essential per kart to protect adjustments from dirt and impacts.\u003cp\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eDirect fit for Axiom and Xpect models\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThree required\u003c\/strong\u003e for comprehensive coverage\u003c\/li\u003e\n\u003cli\u003eMaintains clean, functional spacing\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eBy sealing out grit, it preserves pill integrity, ensuring your axle geometry stays true for predictable handling and quicker laps. This aids pit organization, as covered components require less frequent cleaning. SKU: PM-12SL10PC.\u003c\/p\u003e\u003cp\u003eRacers appreciate how it extends component life, reducing downtime and focusing efforts on speed strategies rather than repairs.\u003c\/p\u003e\n\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eQ: How many covers do I need for my kart?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eA:\u003c\/strong\u003e You need three covers per kart to provide comprehensive protection for your Axiom or Xpect axle cassettes.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: Why is it important to cover my axle cassettes?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eA:\u003c\/strong\u003e These covers seal out dirt, grit, and track debris. By keeping the internal components clean, you preserve the integrity of your pill adjustments, ensuring your axle geometry remains consistent for predictable handling.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: Are these covers compatible with all axle cassettes?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eA:\u003c\/strong\u003e No, these are specifically designed as a direct fit for Axiom and Xpect model cassettes. Please verify your cassette model before purchasing.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: Does using these covers save time in the pits?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eA:\u003c\/strong\u003e Yes. By preventing grime buildup, you spend significantly less time cleaning your adjustment components, allowing you to focus more on your race strategy and setup.\u003c\/p\u003e\n\n\u003ch3\u003eRelated Products From Vendor\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/pm-12sl10-pmi-axiom-cassette-pm-12sl10\"\u003ePMI Axiom Axle Cassette - Versatile Left and Right Fit with Bearing Ring\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/pm-12ht9bs-performance-small-bearing-sleeve-pm-12ht9bs\"\u003ePerformance Small Bearing Sleeve for Axiom Kart Cassettes\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/pm-12ht9b-performance-big-bearing-sleeve-pm-12ht9b\"\u003ePerformance Big Bearing Sleeve for Axiom Cassettes - 72mm OD Fit\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/pm-35-40l10m-adjustable-axle-cassette-for-40mm-pm-35-40l10m\"\u003eAdjustable Metric Axle Cassette for 40mm Axles and 80mm Bearings\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/pm-12-40-10-metric-axle-cassette-pm-12-40-10\"\u003eBlack Anodized Metric Axle Cassette for 80mm OD Bearings\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Performance Manufacturing","offers":[{"title":"Default Title","offer_id":52562728681790,"sku":"PM-12SL10PC","price":11.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0962\/4721\/8494\/files\/axlecassettes-pm-12sl10pc-performance-pill-cover-pm-12sl10pc.jpg?v=1763114802"},{"product_id":"prc-ck-phantom-style-cassette-kit-prc-ck","title":"Complete Phantom Style Cassette Kit for Kart Drivelines","description":"\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eComprehensive Kit Contents:\u003c\/strong\u003e Two durable cassettes form the core, providing a stable base for axle mounting.\u003c\/li\u003e\n\u003cli\u003eLube rings integrated to keep bearings lubricated, cutting down on heat buildup during intense runs.\u003c\/li\u003e\n\u003cli\u003eFour alignment pins for spot-on positioning, preventing misalignment that could sap power or cause uneven tire wear.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eDelve into the Phantom style's engineering: this kit transforms your kart's rear end into a efficiency machine, where every rotation counts toward faster laps. For Phantom chassis owners, it's a plug-and-play solution that aligns perfectly with factory specs, yet offers room for tweaks to suit your driving style—whether you're chasing podiums on dirt or asphalt.\u003c\/p\u003e\u003cp\u003ePicture this: smoother power delivery means less energy lost to slippage, directly adding tenths to your times. The lube rings, in particular, extend component life by warding off dry friction, so you're not sidelined by unexpected failures. Alignment pins ensure the cassette stays true, promoting balanced weight distribution that sharpens cornering response.\u003c\/p\u003e\u003cp\u003eBeyond speed gains, the kit aids trackside efficiency—everything you need in one package reduces clutter in your toolkit, letting you focus on setup strategies. Racers praise its robustness in high-vibration environments, noting fewer adjustments needed between sessions. For custom builds, it pairs well with various axle lengths, offering versatility across track types.\u003c\/p\u003e\u003cp\u003eConsider the broader impact: precise cassette installation leads to consistent gear meshing, vital for maintaining momentum through straights. The SKU PRC-CK marks this as a go-to for Phantom enthusiasts, ensuring quick identification for restocks. In competitive karting, where reliability equals victories, this kit delivers on both fronts, helping you organize better and race smarter.\u003c\/p\u003e\u003cp\u003eTechnical edges include corrosion-resistant materials that hold up against sweat, rain, and track grime, while the design facilitates easy inspection for wear. Upgrading to this kit isn't just about parts; it's about building a driveline that responds to your inputs, turning potential handling quirks into predictable performance. Whether tuning for junior classes or senior divisions, it supports setups that keep you competitive.\u003c\/p\u003e\n\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eQ: Is this kit compatible with all kart chassis brands?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eA:\u003c\/strong\u003e This kit is specifically engineered as a Phantom-style solution. While it is a plug-and-play fit for Phantom chassis, it is designed for standard kart drivelines and can be adapted for custom builds, provided your axle diameter and mounting points align with the cassette specifications.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: Why are the integrated lube rings important for my axle cassettes?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eA:\u003c\/strong\u003e The integrated lube rings are critical for reducing dry friction and heat buildup. By maintaining consistent lubrication, they significantly extend the lifespan of your bearings and ensure smoother rotation, which helps maintain momentum through the corners.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: How do the alignment pins improve my kart's performance?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eA:\u003c\/strong\u003e The four included alignment pins ensure the cassettes remain perfectly square to the axle. This prevents misalignment that can cause uneven tire wear, drag, and power loss, ultimately leading to more predictable handling and sharper cornering response.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: Does this kit require special tools for installation?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eA:\u003c\/strong\u003e The kit is designed for straightforward installation. Because it includes all necessary components—cassettes, lube rings, and alignment pins—you can perform a full driveline upgrade without needing a complex array of specialized tools, making it ideal for trackside maintenance.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: How often should I inspect the cassettes for wear?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eA:\u003c\/strong\u003e Due to the high-vibration environment of kart racing, we recommend inspecting your cassettes before every race weekend. Check for any signs of play or debris buildup, and ensure the alignment pins are seated correctly to maintain optimal driveline efficiency.\u003c\/p\u003e\n\n\u003ch3\u003eRelated Products From Vendor\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/prc-lr-tsi-replacement-lube-ring-for-triton-seraph-and-icon-fits-small-uc-206-bearing-only-bw-prclr-tsi\"\u003eTSI-Compatible Replacement Lube Ring for Triton, Seraph, Icon Karts\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/prc-cp-cassette-alignment-pin-sold-each-prc-cp\"\u003ePrecision Cassette Alignment Pin for Kart Axles\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"PRC","offers":[{"title":"Default Title","offer_id":52565668069694,"sku":"PRC-CK","price":224.05,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0962\/4721\/8494\/files\/axlecassettes-prc-ck-phantom-style-cassette-kit-prc-ck.jpg?v=1763116313"},{"product_id":"pm-35sm-adjustable-axle-cassette-for-3-8-16-hardware-big-bearing-pm-35sm","title":"Performance Manufacturing PM-35SM Adjustable Axle Cassette - Big Bearing - All Classes","description":"\u003cp\u003eDialing in rear-end tension is critical for maximizing drive off the corner, and when you are searching for the best go kart parts near me, the Performance Manufacturing PM-35SM Adjustable Axle Cassette delivers unmatched precision. Engineered specifically for competitive sprint and oval karting, this split-style cassette revolutionizes how you manage chain tension and axle alignment. By allowing rapid, micro-adjustments without compromising chassis bind, you ensure that every ounce of horsepower transfers efficiently to the track.\u003c\/p\u003e\u003ch2\u003eBeyond the Clutch Assembly: Maximizing Rear-End Grip\u003c\/h2\u003e\u003cp\u003eWhile many drivers focus entirely on their lo206 carburetor kit or clutch assembly for acceleration, true speed is dictated by rear-axle efficiency. The PM-35SM integrates seamlessly into industry-standard 3-bolt traditional welded hangers. Its innovative split construction means you can adjust chain tension effortlessly, optimizing power delivery from the engine to the wheels while maintaining absolute structural integrity under high-G cornering loads. When the track rubbers up and the grip levels change, having an adjustable cassette allows you to fine-tune your wheelbase and chain slack in seconds.\u003c\/p\u003e\u003ch2\u003eThe Ultimate Foundation for Your Race Wheel Setup\u003c\/h2\u003e\u003cp\u003eAt Swift Karting, we know that generic solutions don't win races. We aren't just a parts are us catalog; we provide championship-caliber hardware. This cassette is built to accommodate large bearings (sold separately), drastically minimizing rotational friction and supporting heavier lateral loads. Whether you're navigating tight technical infields or wide-open sweepers, the robust build reduces driveline vibrations, ensuring your race wheel stays planted and your momentum remains unbroken. Proper axle alignment prevents premature tire wear and keeps your kart rolling free down the straights.\u003c\/p\u003e\u003ch2\u003eTechnical Specifications \u0026amp; Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSplit-Style Architecture:\u003c\/strong\u003e Enables rapid, bind-free chain tension adjustments in the hot pits without removing the axle.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBig Bearing Compatibility:\u003c\/strong\u003e Designed for oversized bearings to reduce friction and handle extreme lateral racing loads.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e3-Bolt Hanger Integration:\u003c\/strong\u003e Mounts perfectly to traditional welded chassis hangers for universal sprint and oval fitment.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e3\/8-16 Hardware Fitment:\u003c\/strong\u003e Tailored for heavy-duty 3\/8-16 mounting bolts to prevent slipping under massive engine torque.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVibration Dampening:\u003c\/strong\u003e Rigid construction minimizes driveline harmonics, protecting your axle, chain, and sprockets.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCorrosion-Resistant Finish:\u003c\/strong\u003e Withstands harsh trackside elements, aggressive brake cleaners, and track debris.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOptimized Load Distribution:\u003c\/strong\u003e Prevents axle deflection to maintain consistent handling geometry throughout the race.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Performance Manufacturing Inc","offers":[{"title":"Default Title","offer_id":52566081044798,"sku":"PM-35SM","price":102.54,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0962\/4721\/8494\/files\/axlecassettes-pm-35sm-adjustable-axle-cassette-for-3-8-16-hardware-big-bearing-pm-35sm.jpg?v=1763116443"},{"product_id":"pm-103-cassette-hanger-bracket-pm-103","title":"Versatile PM-103 Cassette Hanger Bracket for Kart Chassis Welding","description":"\u003cp\u003eStruggling with loose axle cassettes that throw off your kart's balance? The PM-103 Cassette Hanger Bracket solves that by providing a dependable weld-on base with a proven three-bolt pattern, compatible across major kart brands.\u003c\/p\u003e\u003cp\u003eThis bracket isn't just functional—it's a game-changer for drive-line efficiency. By securing the cassette firmly, it channels more engine power to the wheels, reducing energy loss and boosting top-end speed.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eUniversal fit:\u003c\/strong\u003e Adapts to standard chassis tubes for quick integration.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnhanced durability:\u003c\/strong\u003e High-grade steel resists cracking under repeated stress.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEasy alignment:\u003c\/strong\u003e Bolt pattern allows for straightforward adjustments to optimize track performance.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOrganized setup:\u003c\/strong\u003e Keeps components tidy, speeding up pre-race prep and maintenance.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eIn the heat of competition, every detail counts. Weld the SKU: PM-103 in place and experience tighter lines through chicanes, faster exits from turns, and a more responsive kart overall. It's the unsung hero that elevates your racing edge, ensuring you're not just participating but leading the field.\u003c\/p\u003e\n\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eQ: Is the PM-103 Cassette Hanger Bracket compatible with all kart chassis?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eA:\u003c\/strong\u003e The PM-103 features a universal design with a standard three-bolt pattern, making it highly adaptable to most major kart chassis brands. However, as it is a weld-on component, ensure your chassis tubing is clean and prepped for welding to ensure a secure fit.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: Does this bracket require professional welding?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eA:\u003c\/strong\u003e Yes, the PM-103 is a weld-on component. We recommend having it installed by a qualified fabricator or someone experienced in chassis welding to ensure proper alignment and structural integrity, which is critical for maintaining your kart's handling and safety.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: How does this bracket improve my kart's performance?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eA:\u003c\/strong\u003e By providing a rigid, secure base for your axle cassette, the PM-103 reduces flex and energy loss in the drivetrain. This allows for more efficient power transfer to the rear wheels, resulting in better acceleration out of corners and improved overall responsiveness.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: What maintenance is required for the axle cassette hanger?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eA:\u003c\/strong\u003e Regularly inspect the weld points and the bolt pattern for any signs of stress or cracking, especially after high-impact events or race weekends. Keeping the mounting hardware tight and the bracket free of debris will ensure consistent performance and longevity.\u003c\/p\u003e\n\n\u003ch3\u003eRelated Products From Vendor\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/pursuit-xpect-right-axle-cassette-pm-012100\"\u003eRight-Side Axle Cassette for Pursuit and Xpect Kart Models\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/pm-103sl10r-axiom-rh-weldment-only-pm-103sl10r\"\u003ePMI Axiom Right Hand Weldment for Balanced Kart Rear Setup\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/pm-103sl10l-axiom-lh-weldment-only-pm-103sl10l\"\u003ePMI Axiom Left Hand Weldment for Precision Kart Chassis Builds\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/pmi-laser-alignment-system-standard-axle-pm-091200st\"\u003ePMI Laser Alignment System for Standard Axle Karts\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/pmi-laser-axle-adaptor-standard-pm-091020\"\u003ePMI Standard Laser Axle Adaptor in Blue Anodized Aluminum\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"PMI","offers":[{"title":"Default Title","offer_id":52566221062462,"sku":"PM-103","price":24.85,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0962\/4721\/8494\/files\/axlecassettehangers-pm-103-cassette-hanger-bracket-pm-103.jpg?v=1763116486"},{"product_id":"pursuit-xpect-left-axle-cassette-pm-012200","title":"Slack Karts Pursuit \u0026 Xpect Left-Side Axle Cassette - Small Bearing - Dirt Oval","description":"\u003cp\u003eWhen sourcing elite racing gear for your dirt oval chassis, securing the rear axle with absolute precision is non-negotiable for maintaining corner speed. The Slack Karts Left-Side Axle Cassette is engineered specifically for the Pursuit and Xpect frames, anchoring your driveline to handle extreme lateral loads on banked tracks. Unlike generic components from standard go kart suppliers, this cassette ensures exact left-side geometry, promoting balanced weight transfer and eliminating the chassis bind that scrubs off crucial tenths per lap.\u003c\/p\u003e\u003ch2\u003eSeamless Integration with Bully Clutches and Drivelines\u003c\/h2\u003e\u003cp\u003eA rigid axle foundation is critical when transmitting power from high-torque engines. Whether you are running a built clone or experimenting with an electric motor for go karts, this cassette prevents axle deflection under load. This rigidity ensures perfect chain alignment, maximizing the engagement efficiency of premium bully clutches and preventing premature sprocket wear. By dampening harmonic vibrations, it protects your entire driveline from the hub to the engine mount.\u003c\/p\u003e\u003ch2\u003eUncompromising Safety and Setup Consistency\u003c\/h2\u003e\u003cp\u003eSafety and consistency go hand-in-hand on the track. Just as you wouldn't compromise by choosing anything less than the best helmets, you shouldn't compromise your axle's structural integrity. This direct OEM replacement cassette allows for rapid pit adjustments, letting you fine-tune chain tension and axle lead without wrestling with misaligned hardware.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eChassis Specific Geometry:\u003c\/strong\u003e Precision-machined exclusively for Slack Pursuit and Xpect frames.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDeflection Resistance:\u003c\/strong\u003e Robust billet construction withstands extreme torque from high-output engines.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVibration Dampening:\u003c\/strong\u003e Reduces harmonic resonance to extend the lifespan of bearings and hubs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOptimized Weight Transfer:\u003c\/strong\u003e Anchors the left axle to promote predictable handling on slick or grippy surfaces.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRapid Pit Maintenance:\u003c\/strong\u003e Streamlined design allows for fast, hassle-free adjustments between heat races.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBearing Compatibility:\u003c\/strong\u003e Requires PM-012004 small version bearing insert sleeve for complete installation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDirect OEM Replacement:\u003c\/strong\u003e Ensures factory-perfect alignment without the need for chassis modifications.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eFor teams managing multiple karts, standardizing your fleet with genuine Performance Manufacturing components streamlines weekly maintenance. When track conditions change rapidly from tacky to dry-slick, having a reliable left-side cassette means your chassis adjustments translate directly to the tires. Speaking of grip, pairing this rigid driveline setup with the best go kart tires for racing ensures that every ounce of horsepower is driven straight into the dirt. Don't let a fatigued or warped cassette dictate your weekend; anchor your setup with precision and focus on the podium.\u003c\/p\u003e\n\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eQ: Is this cassette compatible with all Slack Karts models?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eA:\u003c\/strong\u003e This specific axle cassette is precision-machined exclusively for the Slack Pursuit and Xpect chassis. It is not designed for other Slack models or different brands of go-karts.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: What additional parts do I need for installation?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eA:\u003c\/strong\u003e This cassette requires the PM-012004 small version bearing insert sleeve for a complete and secure installation.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: How does this cassette improve my kart's handling?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eA:\u003c\/strong\u003e By providing a rigid anchor for the left-side axle, this cassette eliminates chassis bind and ensures consistent geometry. This promotes predictable weight transfer, which is essential for maintaining corner speed on both tacky and dry-slick dirt oval tracks.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: Will this help with chain alignment?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eA:\u003c\/strong\u003e Yes. Because this cassette is a direct OEM replacement, it ensures factory-perfect alignment. This prevents axle deflection under high-torque loads, which keeps your chain properly aligned and reduces wear on your bully clutch and sprockets.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: How often should I inspect my axle cassette?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eA:\u003c\/strong\u003e You should inspect your cassette before every race day. Look for signs of fatigue or warping, especially after heavy contact or if you notice inconsistent handling. A rigid, undamaged cassette is vital for maintaining the structural integrity of your driveline.\u003c\/p\u003e\n\n\u003ch3\u003eRelated Products From Vendor\u003c\/h3\u003e\n\u003cp\u003e\u003ca href=\"\/products\/pmi-laser-alignment-system-thin-wall-axle-pm-091200tw\"\u003ePMC PM-091200TW Laser Alignment System - Thin Wall 1\/8\" Axles - Universal Karting\u003c\/a\u003e\u003c\/p\u003e","brand":"Performance Manufacturing Corp","offers":[{"title":"Default Title","offer_id":52566426648894,"sku":"PM-012200","price":64.69,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0962\/4721\/8494\/files\/axlecassettes-pursuit-xpect-left-axle-cassette-pm-012200.jpg?v=1763116552"},{"product_id":"pursuit-xpect-right-axle-cassette-pm-012100","title":"Right-Side Axle Cassette for Pursuit and Xpect Kart Models","description":"\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTargeted Right-Side Fit:\u003c\/strong\u003e Exclusively for Pursuit and Xpect, ensuring mirror-image balance with left counterparts.\u003c\/li\u003e\n\u003cli\u003eNo bearing insert bundled—pair solely with small Pursuit version for best results.\u003c\/li\u003e\n\u003cli\u003eHigh-strength materials resist bending under load.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eSecuring the right axle, this cassette is pivotal for symmetric driveline function, where misalignment spells lost time. It facilitates precise sprocket positioning, optimizing chain wrap for efficient power flow.\u003c\/p\u003e\u003cp\u003eRacers benefit from its role in fine-tuning rear stiffness, which influences how your kart bites into apexes—crucial for shaving seconds. The SKU PM-012100 keeps your orders straightforward.\u003c\/p\u003e\u003cp\u003ePractical perks extend to durability: it handles off-track excursions without failing, saving repair hassles. For organized pits, its modularity means targeted replacements, not full assemblies.\u003c\/p\u003e\u003cp\u003eExplore its impact on dynamics—right cassette integrity supports differential-like behavior in turns, aiding rotation without sacrificing straight-line speed. In endurance formats, it contributes to longevity, letting you concentrate on strategy over mechanics.\u003c\/p\u003e\n\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eQ: Is the bearing insert included with this axle cassette?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eA:\u003c\/strong\u003e No, this product does not include a bearing insert. It is designed to be paired with the small Pursuit version for optimal fit and performance.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: Why is it important to use a model-specific right-side cassette?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eA:\u003c\/strong\u003e The Pursuit and Xpect models require a specific mirror-image balance. Using the correct right-side cassette ensures precise sprocket positioning, which is critical for maintaining efficient chain wrap and preventing driveline misalignment.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: How does this cassette affect my kart's handling?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eA:\u003c\/strong\u003e This cassette plays a key role in fine-tuning rear stiffness. By maintaining structural integrity, it helps the kart bite into apexes more effectively and aids in rotation during turns without sacrificing straight-line speed.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: Can I use this on other kart brands?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eA:\u003c\/strong\u003e This cassette is engineered exclusively for Pursuit and Xpect kart models. We recommend using it only on these specific chassis to ensure proper geometry and performance.\u003c\/p\u003e\n\n\u003ch3\u003eRelated Products From Vendor\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/pmi-laser-alignment-system-standard-axle-pm-091200st\"\u003ePMI Laser Alignment System for Standard Axle Karts\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/pmi-laser-axle-adaptor-standard-pm-091020\"\u003ePMI Standard Laser Axle Adaptor in Blue Anodized Aluminum\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/pm-15m-mini-sprocket-hub-1-250-pm-15m\"\u003e1.250\" MINI Sprocket Hub for Compact Kart Drivetrains\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/pm-103sl10r-axiom-rh-weldment-only-pm-103sl10r\"\u003ePMI Axiom Right Hand Weldment for Balanced Kart Rear Setup\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/aluminum-bearing-shield-fits-1-842-race-od-rbi-or-wms-big-bearing-pm-36f\"\u003ePMI PM-36F Aluminum Bearing Shield - 1.842\" RBI \u0026amp; WMS Big Bearings - All Classes\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"PMI","offers":[{"title":"Default Title","offer_id":52566439428414,"sku":"PM-012100","price":64.69,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0962\/4721\/8494\/files\/axlecassettes-pursuit-xpect-right-axle-cassette-pm-012100.jpg?v=1773749816"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0962\/4721\/8494\/collections\/axlecassettehangers-pm-103-cassette-hanger-bracket-pm-103.jpg?v=1788978619","url":"https:\/\/swiftkarting.com\/collections\/kart-axle-cassettes-flangettes-bearing-hangers.oembed","provider":"Swift Karting","version":"1.0","type":"link"}