{"title":"Bully 1\" Turbo Clutches","description":"\u003cp\u003eBully 1\" Turbo clutches are centrifugal kart clutches with a 1 inch crankshaft bore, typically built as 4-disc, 6-spring assemblies. This category covers complete clutches (sprocket not included) and #35 chain drivers in tooth counts from 14T through 21T.\u003c\/p\u003e","products":[{"product_id":"bully-turbo-drive-hub-bcdhstar","title":"Bully Turbo Drive Hub for Star Clutch Systems","description":"\u003cp\u003eAt the heart of every responsive Bully 1\" Turbo clutch lies the Drive Hub, OEM part #098-641, engineered to channel raw engine power directly to your kart's rear end without compromise. This star-configured hub mounts securely, providing the stable foundation that top racers rely on for explosive starts and sustained velocity through demanding circuits.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eForged from high-strength alloy to resist deformation under extreme loads.\u003c\/li\u003e\n\u003cli\u003ePrecision-machined splines for flawless integration with clutch stars and sprockets.\u003c\/li\u003e\n\u003cli\u003eReduces driveline harmonics, smoothing out power pulses for better control in corners.\u003c\/li\u003e\n\u003cli\u003eCompatible across multiple Bully Turbo models, simplifying upgrades and repairs.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eConsider the difference it makes: a worn or inferior hub introduces flex that dissipates energy as heat and vibration, robbing you of tenths per lap. The Bully Turbo Drive Hub eliminates this, locking in efficiency so every rev counts toward forward momentum. Track data from pro teams shows setups with this hub achieving up to 5% better power retention in mid-range RPMs, crucial for overtaking maneuvers.\u003c\/p\u003e\u003cp\u003eInstallation pairs easily with standard tools, and its balanced design minimizes bearing wear, extending the lifespan of your entire clutch assembly. For kart builders focused on weight savings without sacrificing strength, this hub strikes the perfect balance. Include it in your drive-line refresh to organize parts more effectively at the track—less guesswork, more racing. The SKU BCDHSTAR marks it as authentic Bully quality, trusted by champions for seasons of reliable performance.\u003c\/p\u003e\u003cp\u003eBeyond speed gains, it contributes to safer racing by maintaining predictable handling under full throttle. Whether you're dialing in a sprint kart or an endurance machine, this hub elevates your setup from good to unbeatable, helping you stay organized and ahead of the pack.\u003c\/p\u003e\n\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eQ: Is the Bully Turbo Drive Hub compatible with all Bully clutch systems?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eA:\u003c\/strong\u003e This specific hub (BCDHSTAR) is engineered for Bully 1\" Turbo clutch systems. It is designed to integrate seamlessly with standard Bully clutch stars and sprockets for that specific model line.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: Why should I replace my drive hub during a clutch rebuild?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eA:\u003c\/strong\u003e Over time, a worn hub can develop micro-flex, which leads to energy loss through heat and vibration. Replacing it ensures a stable foundation for your clutch, helping you maintain consistent power transfer and preventing unnecessary wear on your clutch assembly.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: Does this hub require special tools for installation?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eA:\u003c\/strong\u003e No, the Bully Turbo Drive Hub is designed for straightforward installation using standard shop tools. Its precision-machined splines ensure a secure fit, but always ensure your crank spacer and retaining bolts are properly torqued to maintain alignment.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: How does this hub affect my kart's performance on the track?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eA:\u003c\/strong\u003e By reducing driveline harmonics and eliminating flex, this hub allows for more efficient power delivery. Pro teams have observed up to 5% better power retention in mid-range RPMs, which is critical for maintaining momentum and executing successful overtaking maneuvers.\u003c\/p\u003e\n\n\u003ch3\u003eRelated Products From Vendor\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/bully-clutch-1-turbo-driver-15-tooth-35-bcd15star\"\u003ePrecision Bully 1\" Turbo Clutch Driver 15-Tooth for #35 Chain Setup\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/bully-turbo-driver-bearing-bcdbstar\"\u003eBully Turbo Driver Bearing for Smooth Clutch Operation\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/bully-1-turbo-crank-spacer-bccsstar\"\u003eEssential Bully 1\" Turbo Crank Spacer for Optimal Alignment\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/bully-turbo-inner-thrust-bearing-bctbstar\"\u003eBully Turbo Inner Thrust Bearing for Axial Load Management\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/bully-turbo-star-retaining-bolt-bcrbstar\"\u003eBully Turbo Star Retaining Bolt 3\/8-24 x 1.0\"\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Bully","offers":[{"title":"Default Title","offer_id":52562558615870,"sku":"BCDHSTAR","price":85.19,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0962\/4721\/8494\/files\/bully1turbo-bully-turbo-drive-hub-bcdhstar.jpg?v=1763111828"},{"product_id":"bully-1-turbo-crank-spacer-bccsstar","title":"Essential Bully 1\" Turbo Crank Spacer for Optimal Alignment","description":"\u003cp\u003ePrecision alignment starts here with the Bully 1\" Turbo Crank Spacer, a vital piece that positions your crankshaft correctly within the clutch assembly. Without it, even the best clutches can underperform due to offset issues.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eKey Benefits:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eEnsures even load distribution across the drivetrain.\u003c\/li\u003e\n\u003cli\u003eReduces wear on bearings and seals for longer life.\u003c\/li\u003e\n\u003cli\u003ePromotes quicker engagement for better starts.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThis spacer is indispensable for kart builders aiming to fine-tune their setup. By maintaining proper spacing, it helps transfer power more efficiently, allowing your engine to rev freely and propel you faster out of the gates. Trackside, it simplifies adjustments, keeping your pit area organized and race-ready. SKU: BCCSSTAR makes it easy to stock up. Whether you're assembling a new kart or refreshing an old one, this component ensures your drive-line components work in harmony, cutting down on downtime and boosting overall speed.\u003c\/p\u003e\n\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eQ: Why is the 1\" Turbo Crank Spacer necessary for my kart clutch?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eA:\u003c\/strong\u003e The spacer ensures your crankshaft is correctly positioned within the clutch assembly. Without it, you may experience offset issues that lead to uneven load distribution, premature wear on bearings, and poor clutch engagement.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: How do I know if I need to replace my current crank spacer?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eA:\u003c\/strong\u003e If you notice excessive play in your clutch assembly, uneven wear on your drive-line components, or if your clutch is not engaging smoothly, it is time to inspect your spacer for signs of wear or deformation.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: Does this spacer work with all Bully clutch systems?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eA:\u003c\/strong\u003e This specific spacer is designed for 1\" Turbo configurations. Always verify your crankshaft diameter and clutch model to ensure proper fitment and alignment.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: Can this spacer help improve my kart's acceleration?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eA:\u003c\/strong\u003e Yes. By maintaining proper spacing, the engine can transfer power more efficiently to the drivetrain, allowing the engine to rev more freely and providing a more consistent launch out of the gates.\u003c\/p\u003e\n\n\u003ch3\u003eRelated Products From Vendor\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/bully-turbo-drive-hub-bcdhstar\"\u003eBully Turbo Drive Hub for Star Clutch Systems\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/bully-turbo-inner-thrust-bearing-bctbstar\"\u003eBully Turbo Inner Thrust Bearing for Axial Load Management\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/bully-1-turbo-outer-thrust-washer-bcotwstar\"\u003eReliable Bully 1\" Turbo Outer Thrust Washer for Smooth Operation\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/bully-turbo-star-retaining-bolt-bcrbstar\"\u003eBully Turbo Star Retaining Bolt 3\/8-24 x 1.0\"\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/bully-turbo-inner-thrust-washer-sold-each-bctwstar\"\u003eBully Turbo Inner Thrust Washer Individual Unit\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Bully","offers":[{"title":"Default Title","offer_id":52562571821374,"sku":"BCCSSTAR","price":9.91,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0962\/4721\/8494\/files\/bully1turbo-bully-1-turbo-crank-spacer-bccsstar.jpg?v=1763112098"},{"product_id":"bully-1-turbo-steel-retaining-washer-long-bc098-607","title":"Heavy-Duty Bully 1\" Turbo Long Steel Retaining Washer","description":"\u003cp\u003eSecure your Bully 1\" Turbo clutch like never before using this long steel retaining washer, designed to hold fasteners in place under extreme conditions. Its extended length offers superior grip, preventing loosening during aggressive track sessions.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eHigh-strength steel construction for lasting hold.\u003c\/li\u003e\n\u003cli\u003eMinimizes vibrations for smoother power transfer.\u003c\/li\u003e\n\u003cli\u003eFacilitates quick, organized installations.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThis washer is crucial for maintaining the integrity of your drivetrain, ensuring that every component stays aligned for optimal speed. By keeping parts secure, it helps you focus on racing rather than repairs, streamlining your track organization. The SKU BC098-607 identifies this essential piece. Ideal for racers who push their karts to the limit, it contributes to faster, more consistent performances by eliminating downtime from loose fittings.\u003c\/p\u003e\n\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eQ: Why is this long steel retaining washer necessary for my Bully 1\" Turbo clutch?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eA:\u003c\/strong\u003e This washer is specifically engineered to provide superior grip and prevent fastener loosening during the high-vibration environment of competitive kart racing. Its extended length ensures a more secure hold compared to standard washers, keeping your drivetrain components properly aligned.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: Can I use this washer on other clutch brands?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eA:\u003c\/strong\u003e This component is designed specifically for the Bully 1\" Turbo clutch system. We recommend using it only with compatible Bully hardware to ensure the correct fit and safety of your drivetrain.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: How often should I inspect my retaining washer?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eA:\u003c\/strong\u003e You should inspect the washer for signs of wear or deformation during every routine clutch maintenance session. If the washer shows any signs of fatigue or if the fastener fitment feels loose, it should be replaced immediately to prevent potential trackside failure.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: Does this washer help with clutch performance?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eA:\u003c\/strong\u003e Yes. By minimizing vibrations and ensuring that all clutch components remain tightly secured, this washer facilitates smoother power transfer and helps maintain consistent performance throughout your race sessions.\u003c\/p\u003e\n\n\u003ch3\u003eRelated Products From Vendor\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/bully-1-turbo-crank-spacer-bccsstar\"\u003eEssential Bully 1\" Turbo Crank Spacer for Optimal Alignment\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/bully-turbo-star-retaining-bolt-bcrbstar\"\u003eBully Turbo Star Retaining Bolt 3\/8-24 x 1.0\"\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/bully-1-turbo-outer-thrust-washer-bcotwstar\"\u003eReliable Bully 1\" Turbo Outer Thrust Washer for Smooth Operation\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/bully-turbo-inner-thrust-washer-sold-each-bctwstar\"\u003eBully Turbo Inner Thrust Washer Individual Unit\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/bully-clutch-driver-snap-ring-retaining-screw-bcsnr\"\u003eBully Clutch Driver Snap Ring and Retaining Screw Kit\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Bully","offers":[{"title":"Default Title","offer_id":52562571985214,"sku":"BC098-607","price":9.91,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0962\/4721\/8494\/files\/bully1turbo-bully-1-turbo-steel-retaining-washer-long-bc098-607.jpg?v=1763112100"},{"product_id":"bully-clutch-spring-adjuster-nut-10-32-thread-bcsn","title":"10-32 Thread Bully Clutch Spring Adjuster Nut for Fine Tuning","description":"\u003cp\u003eFine-tune your Bully clutch like a pro with the 10-32 thread Spring Adjuster Nut, a standard feature on 2019 models including four-spring variants. It allows incremental changes to preload, tailoring engagement to your style.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eThreaded Precision:\u003c\/strong\u003e 10-32 for smooth adjustments.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eVersatile Fit:\u003c\/b\u003e Works with most modern Bully clutches.\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eAvailability Note:\u003c\/em\u003e Brand new take-out from disassembled units.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThis nut is essential for racers who experiment with setups, enabling quick tweaks that optimize slip for different tracks—looser for slippery surfaces, tighter for grip. It keeps your springs organized, preventing over-compression that leads to failures. By supporting accurate tension, it enhances acceleration response, helping you launch harder and carry speed longer. SKU: BCSN. Even as take-out parts, they arrive pristine, saving costs without sacrificing quality. Integrate it to streamline your adjustment process, reducing pit time and boosting confidence in your drivetrain's reliability. For four-disk clutches, it's a must for maintaining balance across springs, ensuring even wear and peak performance every race.\u003c\/p\u003e\n\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eQ: What is the purpose of the 10-32 Spring Adjuster Nut?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eA:\u003c\/strong\u003e This nut allows you to make incremental changes to your clutch spring preload. By adjusting the tension, you can fine-tune your engagement RPM to match track conditions—looser for slippery tracks or tighter for high-grip surfaces.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: Are these nuts compatible with all Bully clutches?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eA:\u003c\/strong\u003e These are designed for modern Bully clutches, including 2019 models and four-spring variants that utilize a 10-32 thread pitch. Please verify your specific clutch model's thread requirements before installation.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: Why is it important to maintain even tension across all springs?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eA:\u003c\/strong\u003e Maintaining consistent tension across all springs ensures even wear on your friction discs and balanced engagement. Using these adjuster nuts helps prevent over-compression, which can lead to premature spring failure and inconsistent acceleration.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: What does \"brand new take-out\" mean?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eA:\u003c\/strong\u003e These parts are removed from brand-new, disassembled clutch units. They arrive in pristine, unused condition, offering you a cost-effective way to replace or upgrade your hardware without sacrificing quality.\u003c\/p\u003e\n\n\u003ch3\u003eRelated Products From Vendor\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/bully-clutch-spring-height-gauge-bcshg\"\u003eBully Clutch Spring Height Gauge for Accurate Measurements\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/bully-clutch-spring-067-purple-bcsp\"\u003ePurple .067\" Bully Clutch Spring for Custom Engagement Rates\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/bully-clutch-spring-100-blue-bcsbl\"\u003eStiff .100\" Blue Bully Clutch Spring for High-Performance\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/bully-clutch-spring-090-red-bcsr\"\u003eMedium .090\" Red Bully Clutch Spring for Enhanced Grip\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/bully-clutch-lever-weight-nut-bcwn\"\u003eSecure Bully Clutch Lever Weight Nut for Tuning\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Bully","offers":[{"title":"Default Title","offer_id":52562572017982,"sku":"BCSN","price":6.46,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0962\/4721\/8494\/files\/bully1turbo-bully-clutch-spring-adjuster-nut-10-32-thread-bcsn.jpg?v=1763112102"},{"product_id":"bully-clutch-driver-snap-ring-retaining-screw-bcsnr","title":"Bully Clutch Driver Snap Ring and Retaining Screw Kit","description":"\u003cp\u003eBundle strength with the Bully Clutch Driver Snap Ring and Retaining Screw, a duo that locks components in place for unflinching performance.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSnap Ring:\u003c\/strong\u003e Quick-install retention.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eScrew:\u003c\/b\u003e Added reinforcement against forces.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThese keep your drivetrain organized and responsive, cutting lap times. SKU: BCSNR.\u003c\/p\u003e\n\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eQ: Why is it important to replace the snap ring and retaining screw during clutch maintenance?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eA:\u003c\/strong\u003e These components are subject to high rotational forces. Over time, they can experience fatigue or wear, which may lead to component failure. Replacing them ensures your driver remains securely locked in place, preventing costly drivetrain damage.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: Is this kit compatible with all Bully clutch systems?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eA:\u003c\/strong\u003e This kit is designed for standard Bully clutch driver assemblies. Always verify your specific driver model to ensure the snap ring diameter and screw thread pitch match your current setup.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: Do I need to use thread locker on the retaining screw?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eA:\u003c\/strong\u003e Yes, it is highly recommended to use a small amount of medium-strength (blue) thread locker on the retaining screw threads to prevent them from backing out due to engine vibration during racing.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: How often should I inspect these hardware components?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eA:\u003c\/strong\u003e You should inspect the snap ring and retaining screw during every major clutch service or whenever you remove the driver for sprocket changes. If the snap ring shows signs of stretching or the screw threads appear stripped, replace them immediately.\u003c\/p\u003e\n\n\u003ch3\u003eRelated Products From Vendor\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/bully-turbo-driver-bearing-bcdbstar\"\u003eBully Turbo Driver Bearing for Smooth Clutch Operation\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/bully-clutch-driver-removeable-bearing-bcdb\"\u003eBully Clutch Driver Removable Bearing for Easy Maintenance\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/bully-1-turbo-steel-retaining-washer-long-bc098-607\"\u003eHeavy-Duty Bully 1\" Turbo Long Steel Retaining Washer\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/bully-turbo-star-retaining-bolt-bcrbstar\"\u003eBully Turbo Star Retaining Bolt 3\/8-24 x 1.0\"\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/bully-spiral-snap-ring-bcssr\"\u003eBully Spiral Snap Ring for 11-Tooth Sprocket Security\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Bully","offers":[{"title":"Default Title","offer_id":52562574508350,"sku":"BCSNR","price":3.93,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0962\/4721\/8494\/files\/bully1turbo-bully-clutch-driver-snap-ring-retaining-screw-bcsnr.jpg?v=1763112132"},{"product_id":"bully-clutch-basket-screw-bcbs","title":"Precision Bully Clutch Basket Screw for Secure Assembly","description":"\u003cp\u003eDon't overlook the basics: the Bully Clutch Basket Screw is engineered to hold your basket firmly, supporting the entire clutch's integrity during high-speed runs.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCorrosion-resistant for long-term use.\u003c\/li\u003e\n\u003cli\u003eEnsures vibration-free securing.\u003c\/li\u003e\n\u003cli\u003eAids in fast, efficient assembly.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThis screw helps organize your toolkit and setup, keeping everything tight for optimal acceleration. SKU: BCBS.\u003c\/p\u003e\n\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eQ: Why is it important to use the correct Bully Clutch Basket Screw?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eA:\u003c\/strong\u003e The basket screw is critical for maintaining the structural integrity of your clutch assembly. Using the correct, high-quality screw ensures the basket remains firmly seated, preventing vibration and potential mechanical failure during high-speed racing.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: How often should I inspect my clutch basket screws?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eA:\u003c\/strong\u003e You should inspect your clutch hardware during every routine maintenance interval. Check for signs of wear, corrosion, or loosening to ensure your clutch setup remains tight and reliable for your next race.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: Can I reuse these screws after removing the clutch basket?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eA:\u003c\/strong\u003e While these screws are durable and corrosion-resistant, it is best practice to inspect the threads for any signs of stretching or damage after removal. If the threads appear compromised, replace them immediately to ensure a secure assembly.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: Does this screw require any specific torque settings?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eA:\u003c\/strong\u003e Always refer to your specific Bully clutch manual for recommended torque specifications. Proper torque is essential to prevent the screw from backing out while ensuring the basket is not overtightened.\u003c\/p\u003e\n\n\u003ch3\u003eRelated Products From Vendor\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/bully-clutch-driver-snap-ring-retaining-screw-bcsnr\"\u003eBully Clutch Driver Snap Ring and Retaining Screw Kit\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/bully-turbo-star-retaining-bolt-bcrbstar\"\u003eBully Turbo Star Retaining Bolt 3\/8-24 x 1.0\"\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/bully-clutch-spring-adjuster-nut-10-32-thread-bcsn\"\u003e10-32 Thread Bully Clutch Spring Adjuster Nut for Fine Tuning\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/bully-clutch-key-bck\"\u003eBully Standard Clutch Key for Secure Hub Locking\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/bully-clutch-lever-weight-bolt-bcwb\"\u003eStainless Steel Bully Clutch Lever Weight Bolt 10-32 x 1\/2\"\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Bully","offers":[{"title":"Default Title","offer_id":52562577064254,"sku":"BCBS","price":0.43,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0962\/4721\/8494\/files\/bully1turbo-bully-clutch-basket-screw-bcbs.jpg?v=1763112164"},{"product_id":"bully-turbo-clutch-key-bckstar","title":"Buller Built 1\" Turbo Stepped Clutch Key - 2\" OAL - Briggs \u0026 Clone Racing","description":"\u003cp\u003eLocking down your drivetrain with precision-machined go kart components is the only way to ensure 100% power transfer from the crankshaft to the rear wheels. The Buller Built 1\" Turbo Stepped Clutch Key (OEM Part #098-611) is engineered specifically for Bully Star and Turbo configurations, eliminating the destructive wobble that saps horsepower and destroys clutch baskets during high-RPM acceleration. When you are fighting for tenths of a second on the track, a sloppy clutch fitment translates directly to lost exit speed and inconsistent lap times.\u003c\/p\u003e\u003ch2\u003eEngineered for Maximum Drivetrain Reliability\u003c\/h2\u003e\u003cp\u003eJust as you trust your kart racing helmets for impact safety and your go kart pedals for threshold braking, your transmission assembly demands uncompromising structural integrity. This stepped key slots perfectly into your 1-inch shaft, locking the clutch star firmly in place. Minor misalignments in the heat of a race don't just cost you time—they cause catastrophic vibrations that can shatter chain guards and end your weekend early. By providing a rock-solid mechanical bind, this key allows your engine's peak torque to flow seamlessly through the drive hub and straight to the asphalt.\u003c\/p\u003e\u003ch2\u003eThe Professional Racer's Choice\u003c\/h2\u003e\u003cp\u003eBuilt to endure the brutal harmonic stresses of competitive karting, this OEM replacement integrates flawlessly with your existing Bully Turbo parts for a bulletproof setup. Whether you are fine-tuning an lo206 carburetor kit in the pits or doing a complete engine overhaul, swapping in a fresh stepped key is a low-cost, high-yield safeguard against premature clutch failure. Keep SKU BCKSTAR stocked in your toolbox to ensure you never miss a heat race due to a sheared keyway.\u003c\/p\u003e\u003ch2\u003eTechnical Specifications \u0026amp; Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eOEM Precision Fit:\u003c\/strong\u003e Genuine Buller Built Part #098-611 ensures exact tolerances for 1\" Turbo and Star clutches.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStepped Design:\u003c\/strong\u003e Custom-machined profile securely locks the clutch star, preventing lateral movement and vibration.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOptimized Dimensions:\u003c\/strong\u003e Features a 2-inch Overall Length (OAL) tailored specifically for 1-inch engine shafts.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Power Transfer:\u003c\/strong\u003e Eliminates clutch wobble to ensure 100% of your horsepower reaches the rear wheels.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHeavy-Duty Construction:\u003c\/strong\u003e Forged to withstand the extreme RPMs and thermal cycles of competitive sprint racing.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUniversal Compatibility:\u003c\/strong\u003e Ideal for high-output Briggs, Clone, and Honda racing engine platforms.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePreventative Maintenance:\u003c\/strong\u003e Protects expensive clutch baskets and drive hubs from keyway wallowing.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eQ: Why is a stepped clutch key necessary for my Bully Turbo clutch?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eA:\u003c\/strong\u003e A stepped key is precision-machined to lock the clutch star firmly onto the crankshaft. This eliminates the \"wobble\" often found with standard keys, which prevents keyway wallowing and ensures 100% power transfer from your engine to the rear wheels.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: How do I know if I need to replace my clutch key?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eA:\u003c\/strong\u003e You should inspect your key whenever you perform clutch maintenance. If you notice any signs of shearing, deformation, or if the clutch star feels loose on the shaft, replace the key immediately to prevent catastrophic vibration damage to your clutch basket and drive hub.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: Is this key compatible with all karting engines?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eA:\u003c\/strong\u003e This key is specifically engineered for 1-inch crankshafts used in high-output Briggs, Clone, and Honda racing platforms equipped with Bully Turbo or Star clutch configurations.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: Can I reuse a clutch key after removing the clutch?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eA:\u003c\/strong\u003e While it is possible, it is highly recommended to keep a fresh supply of keys in your toolbox. Because keys are a low-cost insurance policy against clutch failure, swapping in a new one during an engine overhaul is the best way to ensure a perfect, tight fit every time.\u003c\/p\u003e\n\n\u003ch3\u003eRelated Products From Vendor\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/bully-turbo-jackshaft-drive-hub-3-4-bore-four-disk-bc098-347\"\u003eBuller Built Bully Turbo Jackshaft Drive Hub - 3\/4\" Bore 4-Disk - Modified Class\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/bully-floater-plate-085-bcfp085\"\u003eBuller Built Bully 0.085\" Floater Plate - OEM 098-085 - 4-Cycle Kart Racing\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/bully-floater-plate-075-bcfp075\"\u003eBuller Built Bully 2-Disc 0.075\" Floater Plate - Hardened Steel - All Racing Classes\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/151-002-bully-clutch-shim-151-002\"\u003eBuller Built Bully OEM Clutch Shim - 3\/4\" Shaft - LO206\/Clone Legal\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Buller Built","offers":[{"title":"Default Title","offer_id":52562583650622,"sku":"BCKSTAR","price":13.89,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0962\/4721\/8494\/files\/bully1turbo-bully-turbo-clutch-key-bckstar.jpg?v=1763112289"},{"product_id":"bully-1-turbo-outer-thrust-washer-bcotwstar","title":"Reliable Bully 1\" Turbo Outer Thrust Washer for Smooth Operation","description":"\u003cp\u003eThe Bully 1\" Turbo Outer Thrust Washer acts as a guardian for your clutch's moving parts, handling thrust forces to keep everything running fluidly. It's a simple addition that prevents binding and extends component life.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eLoad Absorption:\u003c\/b\u003e Distributes pressure evenly to avoid wear.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSmooth Engagement:\u003c\/strong\u003e Supports consistent power delivery for faster laps.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eIn high-stakes racing, this washer ensures your setup stays organized and performs without hiccups. SKU: BCOTWSTAR.\u003c\/p\u003e\n\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eQ: What is the purpose of the Bully 1\" Turbo Outer Thrust Washer?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eA:\u003c\/strong\u003e This washer is designed to manage axial thrust forces within your clutch assembly. By distributing pressure evenly, it prevents binding and reduces friction, which helps maintain smooth clutch engagement and extends the lifespan of your internal components.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: When should I replace my outer thrust washer?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eA:\u003c\/strong\u003e You should inspect your thrust washer during routine clutch maintenance. If you notice signs of scoring, thinning, or uneven wear patterns, it is time to replace it to ensure your clutch continues to operate with consistent power delivery.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: Is this washer compatible with all Bully clutches?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eA:\u003c\/strong\u003e This specific washer is designed for the Bully 1\" Turbo clutch system. Always verify your clutch model and shaft size before installation to ensure proper fitment and performance.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: Does this washer require any special lubrication?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eA:\u003c\/strong\u003e While the washer is designed to handle thrust loads, keeping your clutch assembly clean and properly lubricated according to your specific Bully clutch manual will ensure the best results and prevent premature wear.\u003c\/p\u003e\n\n\u003ch3\u003eRelated Products From Vendor\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/bully-turbo-inner-thrust-bearing-bctbstar\"\u003eBully Turbo Inner Thrust Bearing for Axial Load Management\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/bully-turbo-driver-bearing-bcdbstar\"\u003eBully Turbo Driver Bearing for Smooth Clutch Operation\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/bully-1-turbo-crank-spacer-bccsstar\"\u003eEssential Bully 1\" Turbo Crank Spacer for Optimal Alignment\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/bully-turbo-star-retaining-bolt-bcrbstar\"\u003eBully Turbo Star Retaining Bolt 3\/8-24 x 1.0\"\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/bully-turbo-inner-thrust-washer-sold-each-bctwstar\"\u003eBully Turbo Inner Thrust Washer Individual Unit\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Bully","offers":[{"title":"Default Title","offer_id":52562596921662,"sku":"BCOTWSTAR","price":4.93,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0962\/4721\/8494\/files\/bully1turbo-bully-1-turbo-outer-thrust-washer-bcotwstar.jpg?v=1763112508"},{"product_id":"bully-clutch-1-turbo-driver-14-tooth-35-bcd14star","title":"Bully Clutches 1\" Turbo Clutch Driver - 14-Tooth #35 Chain - Sprint \u0026 Oval Racing","description":"\u003cp\u003eMaximizing torque transfer off the apex demands precision-machined kart parts, and the Bully 1\" Turbo Clutch Driver delivers exactly that with its 14-tooth, #35 pitch configuration. Engineered specifically for high-RPM engagement, this driver ensures your power hits the track instantly, eliminating the parasitic drag often found in lesser drive-line components. When you are dialing in your setup—from tuning your parts exhaust to selecting the best go kart tires for racing—your clutch driver is the critical link that dictates how effectively that horsepower translates to forward momentum.\u003c\/p\u003e\u003ch2\u003eOptimized Power Delivery and Engine Bearings Integration\u003c\/h2\u003e\u003cp\u003eThe 2024 production line of the Bully Turbo Driver incorporates an integral caged bearing system that drastically reduces friction under heavy loads. Unlike standard engine bike parts that wear prematurely under competitive stress, these advanced engine bearings are built directly into the driver assembly. This means lower maintenance between heats and consistent, fade-free engagement during grueling endurance races or high-stakes sprint mains. The 14-tooth sprocket is precision-cut to pair flawlessly with a #35 chain, ensuring seamless energy transfer from the crankshaft to the rear axle. A worn driver can cost you valuable tenths of a second, but this precision-machined component guarantees your drivetrain operates at peak mechanical efficiency.\u003c\/p\u003e\u003ch2\u003eTechnical Specifications \u0026amp; Track Advantages\u003c\/h2\u003e\u003cp\u003eEvery fraction of a second counts when you're battling for the podium. By minimizing heat buildup and rotational mass, this clutch driver allows your engine to spool up faster, giving you the holeshot advantage on race day. The robust steel alloy construction resists the warping and tooth degradation commonly seen in high-torque applications.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e14-Tooth Configuration:\u003c\/strong\u003e Precision-machined sprocket teeth guarantee flawless #35 chain engagement and extended chain life.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIntegral Caged Bearing:\u003c\/strong\u003e Built-in advanced engine bearings reduce friction and withstand extreme rotational forces.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1\" Turbo Compatibility:\u003c\/strong\u003e Designed specifically as a direct-fit replacement for Bully 1\" Turbo clutch systems.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHeat Dissipation:\u003c\/strong\u003e Aerospace-grade steel construction minimizes thermal expansion during intense racing conditions.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInstant Torque Transfer:\u003c\/strong\u003e Eliminates drivetrain slop for immediate acceleration out of tight corners.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLow-Maintenance Design:\u003c\/strong\u003e The self-contained bearing architecture requires less frequent lubrication and servicing.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompetition Proven:\u003c\/strong\u003e Trusted by professional racers in both sprint and dirt oval karting classes.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eWhether you are rebuilding your entire drivetrain or simply replacing worn components, the Bully BCD14STAR driver is a non-negotiable upgrade for serious competitors who refuse to compromise on speed. Dominate the competition with unmatched reliability.\u003c\/p\u003e\n\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eQ: Is this 14-tooth driver compatible with all Bully clutches?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eA:\u003c\/strong\u003e This driver is specifically engineered for the Bully 1\" Turbo clutch system. Please ensure your clutch assembly utilizes the 1\" mounting configuration before installation.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: How often should I lubricate the integral caged bearing?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eA:\u003c\/strong\u003e While the self-contained bearing architecture is designed for low maintenance, we recommend inspecting the bearing for debris and applying a high-quality, heat-resistant clutch lubricant between race heats to ensure optimal spin and longevity.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: Can I use this driver with a #40 or #41 chain?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eA:\u003c\/strong\u003e No, this driver is precision-machined exclusively for #35 pitch chain. Using a different chain size will cause improper engagement, premature wear, and potential drivetrain failure.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: What are the performance benefits of the 14-tooth configuration?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eA:\u003c\/strong\u003e The 14-tooth count is a standard choice for balancing acceleration and top-end speed. It provides a robust engagement surface that minimizes rotational mass, allowing your engine to reach peak RPM faster out of corners.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: Should I replace my chain when installing a new clutch driver?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eA:\u003c\/strong\u003e Yes, it is highly recommended to install a new #35 chain whenever you replace your clutch driver. A worn chain will quickly degrade the teeth on a new driver, negating the performance benefits of the precision-machined component.\u003c\/p\u003e\n\n\u003ch3\u003eRelated Products From Vendor\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/bully-turbo-pressure-plate-bcppt\"\u003eBully 1\" Turbo Pressure Plate - Progressive Engagement - Dirt Oval \u0026amp; Sprint\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/bully-floater-plate-110-bcfp110\"\u003eBully 1\" Turbo .110 Floater Plate - Four-Disk Clutch Standard - Sprint \u0026amp; Oval\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/bully-1-turbo-steel-retaining-washer-short-bc098-605\"\u003eBully 1\" Turbo Short Steel Retaining Washer - High-Strength Fastener - Open\/Modified Class\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Bully Clutches","offers":[{"title":"Default Title","offer_id":52562604884286,"sku":"BCD14STAR","price":43.19,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0962\/4721\/8494\/files\/bully1turbo-bully-clutch-1-turbo-driver-14-tooth-35-bcd14star.jpg?v=1763112682"},{"product_id":"bully-clutch-1-turbo-driver-15-tooth-35-bcd15star","title":"Precision Bully 1\" Turbo Clutch Driver 15-Tooth for #35 Chain Setup","description":"\u003cp\u003eEngineered for racers who demand precision, the Bully 1\" Turbo Clutch Driver with 15 teeth targets #35 pitch chain applications, offering a balanced gear ratio that propels your kart forward with authority. This driver stands out in the Bully lineup for its ability to handle increased RPMs without compromising on smoothness.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy It Matters on Race Day:\u003c\/strong\u003e With 15 teeth, it provides finer control over speed modulation, allowing you to exit turns with explosive acceleration. This translates to gaining positions in tight races where every fraction of a second counts.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSuperior Chain Compatibility: Locks in #35 chain for vibration-free operation.\u003c\/li\u003e\n\u003cli\u003eDurable Design: Resists wear from high-torque scenarios, extending service life.\u003c\/li\u003e\n\u003cli\u003ePerformance Boost: Optimizes clutch engagement for quicker throttle response.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eIntegrating this into your drive-line components setup not only enhances speed but also streamlines your trackside organization by reducing the need for frequent adjustments. Kart teams rely on such reliable parts to maintain focus on strategy rather than repairs. The SKU BCD15STAR ensures you get the exact match for your Bully 1\" Turbo clutch. Whether upgrading from a worn driver or building a new rig, this piece delivers the reliability needed to dominate the competition. Feel the surge in power as you hit the straights, knowing your drivetrain is tuned for victory.\u003c\/p\u003e\n\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eQ: Is this 15-tooth driver compatible with my existing #35 chain?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eA:\u003c\/strong\u003e Yes, this Bully Turbo Clutch Driver is specifically engineered for #35 pitch chain applications, ensuring a secure, vibration-free fit for optimal power transfer.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: Why should I choose a 15-tooth driver over other sizes?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eA:\u003c\/strong\u003e A 15-tooth driver offers a balanced gear ratio that provides finer speed modulation. This allows for more explosive acceleration when exiting turns, helping you maintain momentum and gain positions in competitive racing.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: How does this driver improve my kart's performance?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eA:\u003c\/strong\u003e By optimizing clutch engagement, this driver provides a quicker throttle response and handles higher RPMs more smoothly than standard drivers, reducing the need for frequent trackside adjustments.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: Is this driver compatible with all Bully clutch systems?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eA:\u003c\/strong\u003e This specific driver (SKU BCD15STAR) is designed for the Bully 1\" Turbo clutch system. Please ensure your clutch setup matches these specifications before installation.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: What maintenance is required for the clutch driver?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eA:\u003c\/strong\u003e To extend service life, keep the driver clean and free of debris. Regularly inspect the teeth for signs of wear from high-torque scenarios and ensure your chain tension is properly set to prevent premature degradation.\u003c\/p\u003e\n\n\u003ch3\u003eRelated Products From Vendor\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/bully-turbo-driver-bearing-bcdbstar\"\u003eBully Turbo Driver Bearing for Smooth Clutch Operation\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/bully-1-turbo-steel-retaining-washer-long-bc098-607\"\u003eHeavy-Duty Bully 1\" Turbo Long Steel Retaining Washer\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/bully-1-turbo-crank-spacer-bccsstar\"\u003eEssential Bully 1\" Turbo Crank Spacer for Optimal Alignment\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/bully-turbo-inner-thrust-bearing-bctbstar\"\u003eBully Turbo Inner Thrust Bearing for Axial Load Management\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/bully-1-turbo-outer-thrust-washer-bcotwstar\"\u003eReliable Bully 1\" Turbo Outer Thrust Washer for Smooth Operation\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Bully","offers":[{"title":"Default Title","offer_id":52562604917054,"sku":"BCD15STAR","price":43.19,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0962\/4721\/8494\/files\/bully1turbo-bully-clutch-1-turbo-driver-15-tooth-35-bcd15star.jpg?v=1763112684"},{"product_id":"bully-clutch-1-turbo-ring-gear-28t-bc098-428","title":"Bully 1\" Turbo Clutch Ring Gear 28 Teeth","description":"\u003cp\u003eEssential for clutch starters, the Bully 1\" Turbo Ring Gear in 28T configuration integrates flawlessly with your turbo clutch setup.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrecise Tooth Count:\u003c\/strong\u003e 28 teeth offer balanced engagement speed for efficient starting without excessive wear.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTurbo Compatible:\u003c\/strong\u003e Designed for 1\" outboard models, ensuring secure fit and operation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDurable Teeth:\u003c\/strong\u003e Hardened for longevity under repeated starter hits.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThis ring gear plays a pivotal role in getting your kart fired up quickly, minimizing downtime between heats. In races where every second counts, reliable starts mean you're always ready to launch, preserving your position in the field. Paired with Bully clutches, it contributes to a cohesive driveline that hooks up seamlessly from idle to full throttle.\u003c\/p\u003e\u003cp\u003eKart teams value its straightforward installation—simply bolt on and align for immediate benefits. The 28T sizing strikes a sweet spot for mini cup classes, providing torque multiplication that aids in low-end pull without sacrificing top-end speed. Protect your investment in power by choosing gears that endure the rigors of competition.\u003c\/p\u003e\u003cp\u003eStep up your prep game with components that ensure consistency. SKU: BC098-428 is the reliable choice for uninterrupted racing action.\u003c\/p\u003e\n\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eQ: Is this ring gear compatible with all Bully clutches?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eA:\u003c\/strong\u003e This specific 28T ring gear is designed for 1\" outboard Turbo clutch models. Please ensure your clutch system is a 1\" Turbo configuration before purchasing.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: How does the 28-tooth count affect my kart's performance?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eA:\u003c\/strong\u003e The 28T configuration is a popular choice for mini cup classes. It provides a balance of torque multiplication for better low-end pull while maintaining competitive top-end speed.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: Is the installation process difficult?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eA:\u003c\/strong\u003e Not at all. The Bully Turbo Ring Gear is designed for a straightforward bolt-on installation. Simply align the gear with your existing hub and secure it to ensure proper driveline operation.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: How do I maintain the longevity of the ring gear?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eA:\u003c\/strong\u003e This gear is hardened for durability against starter hits. To maximize its lifespan, ensure your starter engagement is clean and that the gear is properly aligned with your starter drive to prevent premature wear on the teeth.\u003c\/p\u003e\n\n\u003ch3\u003eRelated Products From Vendor\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/bully-clutch-1-turbo-ring-gear-hub-bc098-501\"\u003eDurable Bully 1\" Turbo Clutch Ring Gear Hub for Secure Mounting\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/bully-turbo-drive-hub-bcdhstar\"\u003eBully Turbo Drive Hub for Star Clutch Systems\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/bully-1-turbo-crank-spacer-bccsstar\"\u003eEssential Bully 1\" Turbo Crank Spacer for Optimal Alignment\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/bully-1-turbo-steel-retaining-washer-long-bc098-607\"\u003eHeavy-Duty Bully 1\" Turbo Long Steel Retaining Washer\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/bully-turbo-inner-thrust-bearing-bctbstar\"\u003eBully Turbo Inner Thrust Bearing for Axial Load Management\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Bully","offers":[{"title":"Default Title","offer_id":52562604949822,"sku":"BC098-428","price":25.97,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0962\/4721\/8494\/files\/bully1outboardturbo-bully-clutch-1-turbo-ring-gear-28t-bc098-428.jpg?v=1763112685"},{"product_id":"bully-clutch-1-turbo-ring-gear-30t-bc098-430","title":"Bully 1\" Turbo Clutch Ring Gear - 30 Teeth - Mini Cup \u0026 Outboard Racing","description":"\u003cp\u003eStop settling for inferior components when searching for go kart parts near me; the Bully 1\" Turbo 30-Tooth Ring Gear (MPN: BC098-430) is the definitive drivetrain upgrade for aggressive, high-impact starts. Engineered specifically for Bully 1\" outboard turbo clutches, this 30T ring gear delivers a precise gear reduction advantage that maximizes torque transfer off the line. In competitive classes like Mini Cup, where every fraction of a second dictates your track position, this gear ensures progressive clutch engagement and rapid acceleration from a dead stop. By reducing the mechanical load during engine cranking, it preserves battery life and accelerates warm-up cycles, keeping your machine at peak readiness.\u003c\/p\u003e\u003ch2\u003eOptimizing Your Drivetrain Beyond the Go Kart Torque Converter\u003c\/h2\u003e\u003cp\u003eWhile many amateur racers focus solely on tuning their go kart torque converter, professional drivers understand that the clutch ring gear is equally critical for off-the-corner acceleration. The 30-tooth profile on this Bully gear provides the exact bite needed to translate raw RPMs into forward momentum. For high-output carburetor engines that demand immediate load transfer, this ring gear seamlessly bridges the gap between peak horsepower and track surface traction. It bolts directly to compatible 098-305 baskets using the standard 098-028 snap ring, ensuring a bulletproof connection that won't fail under heavy braking or sudden throttle spikes.\u003c\/p\u003e\u003ch2\u003eMaximizing Grip: Pairing Power with the Best Tire\u003c\/h2\u003e\u003cp\u003eDelivering extra torque to the rear axle is only effective if your chassis can handle the load. To fully exploit the aggressive engagement of the Bully 30T gear, you need to pair it with the best tire compound available for your specific track conditions. Whether you are running on high-bite asphalt or slick dirt ovals, matching this clutch gear's progressive bite with the best go kart tires for racing ensures that your power translates into speed rather than wheelspin. The reinforced steel construction of the BC098-430 withstands the intense thermal cycling and mechanical stress of intense race weekends, drastically reducing maintenance intervals.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e30-Tooth Gear Profile:\u003c\/strong\u003e Delivers a calculated gear reduction for superior off-the-line torque and smoother starter action.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDirect Fitment:\u003c\/strong\u003e Engineered specifically for Bully 1\" Turbo outboard clutches and 098-305 baskets.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh-Impact Durability:\u003c\/strong\u003e Machined from hardened steel to withstand the brutal engagement forces of competitive Mini Cup racing.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOptimized Cranking:\u003c\/strong\u003e Reduces mechanical strain on starter batteries and components for faster engine warm-ups.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProgressive Engagement:\u003c\/strong\u003e Smooths out power delivery from high-revving carburetor engines to prevent traction loss.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeamless Integration:\u003c\/strong\u003e Bolts directly to your existing gear ring hub for rapid pit-lane gearing changes.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProfessional Grade:\u003c\/strong\u003e Authentic Bully manufacturing ensures precise tolerances and zero runout at maximum RPM.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eQ: Is this 30-tooth ring gear compatible with all Bully clutches?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eA:\u003c\/strong\u003e No, this gear is specifically engineered for Bully 1\" Turbo outboard clutches. It is designed to bolt directly to compatible 098-305 baskets.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: What hardware do I need to install this ring gear?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eA:\u003c\/strong\u003e This gear is designed for a seamless installation using the standard 098-028 snap ring to secure it to your existing gear ring hub.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: How does changing to a 30-tooth gear affect my kart's performance?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eA:\u003c\/strong\u003e The 30-tooth profile provides a calculated gear reduction, which improves torque transfer off the line and helps with rapid acceleration from a dead stop, making it ideal for competitive Mini Cup racing.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: Does this ring gear help with engine starting?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eA:\u003c\/strong\u003e Yes. By reducing the mechanical load during engine cranking, this gear helps preserve your starter battery life and facilitates faster warm-up cycles.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: How often should I inspect my clutch ring gear?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eA:\u003c\/strong\u003e Because this gear is subjected to intense thermal cycling and mechanical stress, you should inspect it for wear before every race weekend to ensure consistent engagement and prevent potential track-side failures.\u003c\/p\u003e\n\n\u003ch3\u003eRelated Products From Vendor\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/bully-four-disk-mini-cup-clutch-no-sprocket-included-outboard-1-0-mounting-bc4dmcob-ns\"\u003eBully Four-Disk Mini Cup Turbo Clutch - 1.0\" Outboard Mount - Big Block PTO\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/bully-turbo-pressure-plate-bcppt\"\u003eBully 1\" Turbo Pressure Plate - Progressive Engagement - Dirt Oval \u0026amp; Sprint\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/bully-floater-plate-110-bcfp110\"\u003eBully 1\" Turbo .110 Floater Plate - Four-Disk Clutch Standard - Sprint \u0026amp; Oval\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/bully-1-turbo-steel-retaining-washer-short-bc098-605\"\u003eBully 1\" Turbo Short Steel Retaining Washer - High-Strength Fastener - Open\/Modified Class\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Bully","offers":[{"title":"Default Title","offer_id":52562605015358,"sku":"BC098-430","price":25.19,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0962\/4721\/8494\/files\/bully1outboardturbo-bully-clutch-1-turbo-ring-gear-30t-bc098-430.jpg?v=1763112686"},{"product_id":"bully-clutch-friction-disc-oem-8-tab-bcfd","title":"OEM Bully Clutch 8-Tab Friction Disc for Superior Grip","description":"\u003cp\u003eAt the heart of your Bully clutch lies the OEM 8-Tab Friction Disc, crafted with precision to provide exceptional grip and heat dissipation. Measuring between .118\" and .127\" thick, it ensures reliable contact that translates to explosive starts and sustained speed.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e8-Tab Design:\u003c\/strong\u003e Enhances even wear and quick break-in.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eOptimal Thickness:\u003c\/b\u003e Balances durability with responsiveness.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOEM Quality:\u003c\/strong\u003e Matches factory specs for seamless fit.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThis disc is a game-changer for racers seeking to minimize slip and maximize power output. By maintaining friction efficiency, it helps you navigate tracks with confidence, organizing your clutch stack for minimal maintenance. The 8-tab configuration distributes force evenly, reducing hot spots that could slow you down. Kart professionals swear by it for its role in fine-tuning gear ratios, allowing adaptations to different engine tunes. With SKU BCFD, restocking is simple. Integrate it into your drive-line components to feel the difference in throttle response—smoother, faster, and more controlled. Whether in sprints or longer races, this friction disc keeps your momentum unbroken, pushing you toward the checkered flag with every revolution.\u003c\/p\u003e\u003cp\u003eIts compatibility with various Bully models makes it versatile, supporting organized pit strategies that save time and boost race-day readiness.\u003c\/p\u003e\n\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eQ: How do I know when it is time to replace my Bully clutch friction disc?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eA:\u003c\/strong\u003e You should inspect your friction disc if you notice increased clutch slip, inconsistent engagement, or if the thickness measures below the factory specification of .118\". If you see signs of excessive heat glazing or uneven wear, it is time for a replacement to maintain peak performance.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: What is the benefit of the 8-tab design?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eA:\u003c\/strong\u003e The 8-tab configuration is engineered to distribute clamping force more evenly across the disc surface. This helps reduce the formation of localized hot spots, promotes a more uniform break-in period, and ensures smoother power transfer during acceleration.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: Can I use this disc with different engine tunes?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eA:\u003c\/strong\u003e Yes. Because this disc is designed for precise heat dissipation and consistent grip, it is an excellent component for fine-tuning your clutch stack. It allows you to adapt your gear ratios and engagement settings to match the power output of various engine configurations.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: Should I replace my floater plates when installing a new friction disc?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eA:\u003c\/strong\u003e While not always mandatory, it is highly recommended to inspect your floater plates for warping or heat damage whenever you install a new friction disc. Using a fresh disc with a damaged or warped floater plate can lead to premature wear and poor clutch performance.\u003c\/p\u003e\n\n\u003ch3\u003eRelated Products From Vendor\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/bully-clutch-friction-disc-oem-slotted-8-tab-bcfds\"\u003eBully OEM Slotted 8-Tab Friction Disc for Clutches\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/bully-floater-plate-100-bcfp100\"\u003e.100\" Bully Floater Plate for Middle Stack Positioning\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/bully-floater-plate-095-bcfp095\"\u003e.095\" Bully Floater Plate for Reduced Air Gap in Clutches\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/bully-clutch-spring-090-red-bcsr\"\u003eMedium .090\" Red Bully Clutch Spring for Enhanced Grip\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/bully-clutch-spring-100-blue-bcsbl\"\u003eStiff .100\" Blue Bully Clutch Spring for High-Performance\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Bully","offers":[{"title":"Default Title","offer_id":52562613993790,"sku":"BCFD","price":40.88,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0962\/4721\/8494\/files\/bully1turbo-bully-clutch-friction-disc-oem-8-tab-bcfd.jpg?v=1763112840"},{"product_id":"bully-turbo-star-retaining-bolt-bcrbstar","title":"Bully Turbo Star Retaining Bolt 3\/8-24 x 1.0\"","description":"\u003cp\u003eSecure every twist and turn with the Bully Turbo Star Retaining Bolt, sized 3\/8-24 x 1.0\" for unyielding hold on clutch stars in 1\" Turbo assemblies.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eThreaded for high-torque fastening without stripping.\u003c\/li\u003e\n\u003cli\u003eCorrosion-resistant coating for track durability.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThis bolt keeps components from shifting, avoiding power-robbing misalignment. Essential for safety and speed, it simplifies maintenance. SKU: BCRBSTAR ensures exact specs. A must for any kart racer prioritizing organized, vibration-free operation.\u003c\/p\u003e\n\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eQ: Is this bolt compatible with all Bully clutch systems?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eA:\u003c\/strong\u003e This specific 3\/8-24 x 1.0\" bolt is designed specifically for 1\" Turbo clutch assemblies. Please verify your clutch model before installation to ensure proper fitment.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: Why is it important to use a specific retaining bolt for my clutch star?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eA:\u003c\/strong\u003e The clutch star is subject to high rotational forces. Using the correct, high-strength retaining bolt prevents the star from shifting or vibrating loose, which can cause power-robbing misalignment and potential damage to your clutch assembly.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: Should I use thread locker on this bolt?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eA:\u003c\/strong\u003e While the bolt is designed for high-torque fastening, many racers choose to use a small amount of medium-strength thread locker as an extra precaution against vibration during intense racing conditions.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: How often should I inspect this bolt?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eA:\u003c\/strong\u003e You should inspect the retaining bolt during your routine clutch maintenance. Check for any signs of thread wear or corrosion, and ensure it remains torqued to the manufacturer's specifications to maintain optimal performance.\u003c\/p\u003e\n\n\u003ch3\u003eRelated Products From Vendor\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/bully-turbo-drive-hub-bcdhstar\"\u003eBully Turbo Drive Hub for Star Clutch Systems\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/bully-turbo-driver-bearing-bcdbstar\"\u003eBully Turbo Driver Bearing for Smooth Clutch Operation\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/bully-1-turbo-steel-retaining-washer-long-bc098-607\"\u003eHeavy-Duty Bully 1\" Turbo Long Steel Retaining Washer\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/bully-1-turbo-crank-spacer-bccsstar\"\u003eEssential Bully 1\" Turbo Crank Spacer for Optimal Alignment\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/bully-turbo-inner-thrust-bearing-bctbstar\"\u003eBully Turbo Inner Thrust Bearing for Axial Load Management\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Bully","offers":[{"title":"Default Title","offer_id":52562614550846,"sku":"BCRBSTAR","price":2.94,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0962\/4721\/8494\/files\/bully1turbo-bully-turbo-star-retaining-bolt-bcrbstar.jpg?v=1763112851"},{"product_id":"bully-clutch-lever-weight-bolt-bcwb","title":"Stainless Steel Bully Clutch Lever Weight Bolt 10-32 x 1\/2\"","description":"\u003cp\u003eThe 10-32 x 1\/2\" stainless steel Bully Clutch Lever Weight Bolt fastens weights securely, allowing customizable balance for optimal clutch behavior.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eStainless construction fights rust.\u003c\/li\u003e\n\u003cli\u003eSocket head for easy torque.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eIt streamlines weight tuning, aiding faster setups. SKU: BCWB.\u003c\/p\u003e\n\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eQ: Why should I use stainless steel bolts for my clutch levers?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eA:\u003c\/strong\u003e Stainless steel is highly resistant to rust and corrosion, which is essential in the harsh, debris-filled environment of kart racing. It ensures the bolts remain easy to remove and adjust throughout the season.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: How does the weight bolt affect clutch performance?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eA:\u003c\/strong\u003e These bolts allow you to add or adjust weight on the clutch levers. By changing the mass on the levers, you can fine-tune the engagement RPM and the \"hit\" of the clutch to better suit your engine's power band and track conditions.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: Is the 10-32 thread size standard for Bully clutches?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eA:\u003c\/strong\u003e Yes, the 10-32 thread is the standard specification for most Bully clutch lever weight applications. Always verify your specific clutch model's requirements before installation.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: What is the benefit of the socket head design?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eA:\u003c\/strong\u003e The socket head allows for the use of an Allen wrench, which provides better torque control and easier access in tight spaces compared to standard hex-head bolts, making your clutch tuning sessions faster and more precise.\u003c\/p\u003e\n\n\u003ch3\u003eRelated Products From Vendor\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/bully-clutch-lever-weight-nut-bcwn\"\u003eSecure Bully Clutch Lever Weight Nut for Tuning\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/bully-clutch-spring-adjuster-nut-10-32-thread-bcsn\"\u003e10-32 Thread Bully Clutch Spring Adjuster Nut for Fine Tuning\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/bully-clutch-spring-height-gauge-bcshg\"\u003eBully Clutch Spring Height Gauge for Accurate Measurements\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/bully-clutch-lever-dowell-pin-4-spring-bcdp4\"\u003eBully 4-Spring Clutch Lever Dowel Pin\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/bully-clutch-lever-dowell-pin-6-spring-fcdc-dp6\"\u003eBully 6-Spring Clutch Lever Dowel Pin for Stable Fit\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Bully","offers":[{"title":"Default Title","offer_id":52562616746302,"sku":"BCWB","price":1.19,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0962\/4721\/8494\/files\/bully1turbo-bully-clutch-lever-weight-bolt-bcwb.jpg?v=1763112897"},{"product_id":"bully-clutch-lever-weight-nut-bcwn","title":"Secure Bully Clutch Lever Weight Nut for Tuning","description":"\u003cp\u003eThis Bully Clutch Lever Weight Nut locks in your adjustments, ensuring weights stay put during races for consistent performance.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSecure Threading:\u003c\/strong\u003e Prevents loosening under vibration.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eEasy Installation:\u003c\/b\u003e Simplifies tuning sessions.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eOrganizes your lever setup for speed gains. SKU: BCWN.\u003c\/p\u003e\n\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eQ: What is the primary purpose of the Bully Clutch Lever Weight Nut?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eA:\u003c\/strong\u003e This nut is designed to lock your clutch lever weight adjustments in place. By securing the setting, it prevents the weights from shifting due to high-frequency engine vibrations, ensuring your clutch engagement remains consistent throughout the race.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: Is this nut compatible with all Bully clutch systems?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eA:\u003c\/strong\u003e This hardware is designed for standard Bully clutch lever setups. It is essential for racers who frequently tune their engagement settings and need a reliable way to lock those adjustments.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: Do I need special tools to install this weight nut?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eA:\u003c\/strong\u003e No special tools are required. It is designed for easy installation during your routine tuning sessions, allowing you to quickly secure your lever weights and get back on the track.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: How often should I check my clutch hardware?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eA:\u003c\/strong\u003e We recommend checking all clutch hardware, including weight nuts and bolts, before every race day. Ensuring your components are tight and secure is a critical part of kart maintenance to prevent performance loss or mechanical failure.\u003c\/p\u003e\n\n\u003ch3\u003eRelated Products From Vendor\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/bully-clutch-lever-weight-bolt-bcwb\"\u003eStainless Steel Bully Clutch Lever Weight Bolt 10-32 x 1\/2\"\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/bully-clutch-spring-adjuster-nut-10-32-thread-bcsn\"\u003e10-32 Thread Bully Clutch Spring Adjuster Nut for Fine Tuning\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/bully-clutch-lever-dowell-pin-4-spring-bcdp4\"\u003eBully 4-Spring Clutch Lever Dowel Pin\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/bully-clutch-lever-dowell-pin-6-spring-fcdc-dp6\"\u003eBully 6-Spring Clutch Lever Dowel Pin for Stable Fit\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/bully-clutch-spring-height-gauge-bcshg\"\u003eBully Clutch Spring Height Gauge for Accurate Measurements\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Bully","offers":[{"title":"Default Title","offer_id":52562634015038,"sku":"BCWN","price":1.12,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0962\/4721\/8494\/files\/bully1turbo-bully-clutch-lever-weight-nut-bcwn.jpg?v=1763113307"},{"product_id":"bully-clutch-spring-085-black-bcsb","title":"Bully Clutches 6-Spring Black Clutch Spring - .085\" Wire - Adult \u0026 Junior Sprint","description":"\u003cp\u003eDialing in your engagement RPM is the most critical step when upgrading your racing parts for competitive karting. The Bully Clutches .085\" Black Spring (MPN: 098-086) delivers a highly balanced tension rate specifically engineered for 6-spring clutch configurations. By providing a medium-stiff engagement profile, this spring allows the clutch shoes to slip optimally at lower RPMs before locking up precisely at peak torque. This translates to explosive corner exits and reduced bogging under heavy engine load. Whether you are running a high-horsepower modified clone or a standard Briggs animal, tuning your slip points with the .085\" black spring ensures your power band is maximized on every straightaway.\u003c\/p\u003e\u003ch2\u003eSynergy with Wheel Hub Assembly Parts\u003c\/h2\u003e\u003cp\u003ePower transfer doesn't stop at the crankshaft. Once your Bully clutch locks up, the kinetic energy must travel seamlessly through the chain, axle, and directly into your wheel hub assembly parts. If your clutch engages too early, the engine lugs, causing a ripple effect of inefficiency that even the best hubs and bearings can't fix. The .085\" black spring delays engagement just enough to keep the engine in its optimal power curve, ensuring that the rotational force delivered to your rear axle is aggressive and sustained.\u003c\/p\u003e\u003ch2\u003eIntegrating with Cycle Parts and Drivetrain Components\u003c\/h2\u003e\u003cp\u003ePrecision tuning requires consistency across all cycle parts and drivetrain elements. The .085\" black spring is manufactured from high-tensile, heat-treated steel to resist thermal fade during extended heat cycles. Unlike cheaper alternatives that lose tension after a few races, the Bully 098-086 maintains its exact spring rate. The black color-coding allows pit crews to quickly identify the spring weight in a multi-spring stack, preventing mismatched tension rates that lead to uneven shoe wear and erratic lock-up.\u003c\/p\u003e\u003ch2\u003eBeyond Standard Wheel Accessories\u003c\/h2\u003e\u003cp\u003eWhile many racers focus purely on tires and wheel accessories to find grip, the real secret to lowering lap times lies in clutch management. A balanced tension rate reduces the shock load on your drivetrain, preventing wheel spin on low-grip surfaces while maximizing traction when you need it most. Fine-tune your Bully 1\" Turbo or standard 6-spring clutch with these black springs to achieve the ultimate holeshot.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e.085\" Wire Diameter:\u003c\/strong\u003e Provides a balanced, medium-stiff tension rate for optimal slip-to-lock ratios.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHeat-Treated Steel:\u003c\/strong\u003e Resists thermal degradation and tension loss during extreme racing conditions.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor-Coded Black:\u003c\/strong\u003e Ensures rapid identification and prevents mismatched spring stacking in the pits.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePredictable Engagement:\u003c\/strong\u003e Delivers consistent centrifugal force to the clutch shoes for smooth, repeatable lock-up.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBroad Compatibility:\u003c\/strong\u003e Engineered specifically for Bully 6-spring clutches, including the 1\" Turbo models.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOptimized Power Transfer:\u003c\/strong\u003e Keeps the engine in its peak torque band before fully transferring power to the axle.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReduced Drivetrain Shock:\u003c\/strong\u003e Smooths out power delivery to protect your chain, sprockets, and rear assembly.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eQ: How do I know if the .085\" black spring is the right choice for my kart?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eA:\u003c\/strong\u003e The .085\" black spring provides a medium-stiff engagement profile. If you are experiencing engine bogging at corner exit, this spring helps delay engagement slightly to keep your engine in its peak torque band longer before full lock-up.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: Can I mix different spring wire diameters in my Bully 6-spring clutch?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eA:\u003c\/strong\u003e While some tuners experiment with mixed spring rates to fine-tune engagement, it is generally recommended to use a uniform set to ensure even pressure on the clutch plates. The black color-coding makes it easy to identify and maintain a consistent set of six springs.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: How often should I replace my clutch springs?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eA:\u003c\/strong\u003e Clutch springs are subject to extreme heat cycles which can lead to tension loss over time. If you notice your engagement RPM dropping or inconsistent lock-up, it is time to replace your springs to maintain peak performance.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: Are these springs compatible with all Bully clutches?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eA:\u003c\/strong\u003e These springs are specifically engineered for Bully 6-spring clutch configurations, including the popular 1\" Turbo models. Always verify your specific clutch model's spring requirements before installation.\u003c\/p\u003e\n\n\u003ch3\u003eRelated Products From Vendor\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/bully-turbo-pressure-plate-bcppt\"\u003eBully 1\" Turbo Pressure Plate - Progressive Engagement - Dirt Oval \u0026amp; Sprint\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/bully-floater-plate-110-bcfp110\"\u003eBully 1\" Turbo .110 Floater Plate - Four-Disk Clutch Standard - Sprint \u0026amp; Oval\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/bully-clutch-1-turbo-driver-14-tooth-35-bcd14star\"\u003eBully Clutches 1\" Turbo Clutch Driver - 14-Tooth #35 Chain - Sprint \u0026amp; Oval Racing\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/bully-1-turbo-steel-retaining-washer-short-bc098-605\"\u003eBully 1\" Turbo Short Steel Retaining Washer - High-Strength Fastener - Open\/Modified Class\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/bully-clutch-outer-thrust-washer-bcotw\"\u003eBully Clutches 3\/4\" Outer Thrust Washer - BCOTW Thrust Load Management - All Classes\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Bully Clutches","offers":[{"title":"Default Title","offer_id":52562642239806,"sku":"BCSB","price":3.48,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0962\/4721\/8494\/files\/bully1turbo-bully-clutch-spring-085-black-bcsb.jpg?v=1763113482"},{"product_id":"bully-clutch-spring-090-red-bcsr","title":"Medium .090\" Red Bully Clutch Spring for Enhanced Grip","description":"\u003cp\u003eThe red .090\" Bully Clutch Spring strikes a perfect medium, ideal for karts needing firmer resistance to handle higher torques without slipping prematurely.\u003c\/p\u003e\u003cp\u003e\u003cem\u003ePerformance Edge:\u003c\/em\u003e It allows earlier lock-up, channeling more power to the wheels for rapid acceleration out of slow sections.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eColor-coded red for easy sorting.\u003c\/li\u003e\n\u003cli\u003eRobust wire for longevity.\u003c\/li\u003e\n\u003cli\u003eFits 3\/4\" and turbo models.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eRacers appreciate how this spring organizes multi-spring setups, ensuring balanced forces that extend disc life. By fine-tuning engagement, it helps maintain momentum, crucial for overtakes. SKU: BCSR. Use it to adapt to sticky tracks, where extra grip prevents wheel spin, saving precious seconds. Its medium rate complements stock engines, promoting efficient fuel use and consistent laps. Keep your pit box tidy with these identifiable springs, focusing energy on driving fast.\u003c\/p\u003e\n\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eQ: When should I choose the .090\" Red Bully Clutch Spring over other sizes?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eA:\u003c\/strong\u003e The .090\" red spring is a medium-rate option. It is best used when you need firmer resistance to prevent premature slipping under higher torque, or when you need to adapt to a track with extra grip where you want to avoid wheel spin during acceleration.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: How does this spring affect my kart's acceleration?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eA:\u003c\/strong\u003e By providing a medium resistance, this spring allows for an earlier lock-up compared to lighter springs. This channels more power to the wheels, helping you accelerate more rapidly out of slow corners and maintain momentum.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: Is this spring compatible with my current clutch setup?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eA:\u003c\/strong\u003e These springs are designed to fit both 3\/4\" and turbo Bully clutch models. They are color-coded for easy identification, making them ideal for organizing multi-spring setups to ensure balanced forces across your clutch discs.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: Do I need to replace all my springs at once?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eA:\u003c\/strong\u003e For consistent performance and balanced engagement, it is highly recommended to replace your springs as a complete set. Using mixed spring rates can lead to uneven pressure on the friction discs, causing premature wear and inconsistent clutch engagement.\u003c\/p\u003e\n\n\u003ch3\u003eRelated Products From Vendor\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/bully-clutch-spring-height-gauge-bcshg\"\u003eBully Clutch Spring Height Gauge for Accurate Measurements\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/bully-clutch-spring-adjuster-nut-10-32-thread-bcsn\"\u003e10-32 Thread Bully Clutch Spring Adjuster Nut for Fine Tuning\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/bully-clutch-friction-disc-oem-8-tab-bcfd\"\u003eOEM Bully Clutch 8-Tab Friction Disc for Superior Grip\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/bully-clutch-spring-067-purple-bcsp\"\u003ePurple .067\" Bully Clutch Spring for Custom Engagement Rates\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/bully-clutch-spring-100-blue-bcsbl\"\u003eStiff .100\" Blue Bully Clutch Spring for High-Performance\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Bully","offers":[{"title":"Default Title","offer_id":52562642338110,"sku":"BCSR","price":3.48,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0962\/4721\/8494\/files\/bully1turbo-bully-clutch-spring-090-red-bcsr.jpg?v=1763113483"},{"product_id":"bully-clutch-spring-100-blue-bcsbl","title":"Stiff .100\" Blue Bully Clutch Spring for High-Performance","description":"\u003cp\u003ePush boundaries with the blue .100\" Bully Clutch Spring, its stiff profile designed for engines that thrive at peak revs, locking in power for unrelenting speed.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh Stiffness:\u003c\/strong\u003e Delays slip for maximum torque.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eBlue Identifier:\u003c\/b\u003e Simplifies inventory management.\u003c\/li\u003e\n\u003cli\u003eIdeal for modified or high-output karts.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThis spring transforms clutch behavior, allowing sustained high speeds on straights while organizing your stack for even compression. It reduces modulation needs, letting you concentrate on lines. For 3\/4\" clutches, it pairs well with performance discs, enhancing overall drivetrain efficiency. SKU: BCSBL. Track teams use it to counter power surges, preventing bogging and promoting clean shifts. Its durability means fewer changes, keeping your race routine streamlined and focused on winning.\u003c\/p\u003e\n\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eQ: When should I use the .100\" Blue Bully Clutch Spring?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eA:\u003c\/strong\u003e The .100\" blue spring is a stiff option designed for high-performance or modified engines. It is best used when you need to delay clutch engagement to reach higher peak revs and prevent bogging during acceleration.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: How does this spring affect my kart's clutch performance?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eA:\u003c\/strong\u003e By increasing the stiffness of your clutch stack, this spring helps maintain higher torque and sustained speeds on straights. It reduces the need for constant modulation, allowing you to focus on your racing lines.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: Is this spring compatible with my current clutch setup?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eA:\u003c\/strong\u003e This spring is designed for 3\/4\" Bully clutches. It is ideal for racers looking to organize their stack for even compression and works best when paired with high-quality performance friction discs.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: How do I know if I need a stiffer spring?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eA:\u003c\/strong\u003e If you notice your engine is bogging out of corners or failing to reach its power band, a stiffer spring like the blue .100\" can help hold the clutch disengaged longer, allowing the engine to build more RPM before locking in.\u003c\/p\u003e\n\n\u003ch3\u003eRelated Products From Vendor\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/bully-clutch-friction-disc-oem-8-tab-bcfd\"\u003eOEM Bully Clutch 8-Tab Friction Disc for Superior Grip\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/bully-clutch-spring-height-gauge-bcshg\"\u003eBully Clutch Spring Height Gauge for Accurate Measurements\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/bully-clutch-spring-adjuster-nut-10-32-thread-bcsn\"\u003e10-32 Thread Bully Clutch Spring Adjuster Nut for Fine Tuning\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/bully-floater-plate-100-bcfp100\"\u003e.100\" Bully Floater Plate for Middle Stack Positioning\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/bully-clutch-shim-010-silver-bcs010\"\u003eSilver .010\" Bully Clutch Shim for Accurate Clutch Tuning\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Bully","offers":[{"title":"Default Title","offer_id":52562642370878,"sku":"BCSBL","price":3.48,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0962\/4721\/8494\/files\/bully1turbo-bully-clutch-spring-100-blue-bcsbl.jpg?v=1763113485"},{"product_id":"bully-1-turbo-steel-retaining-washer-short-bc098-605","title":"Bully 1\" Turbo Short Steel Retaining Washer - High-Strength Fastener - Open\/Modified Class","description":"\u003cp\u003eSecuring your drive-line with premium go kart components is the difference between taking the checkered flag and suffering a mechanical DNF. The Bully 1\" Turbo Short Steel Retaining Washer (BC098-605) delivers uncompromising clamping force for tight-clearance clutch assemblies. When you are pushing your kart to the absolute limit, the last thing you want to worry about is clutch slippage or component failure. This retaining washer is engineered to lock your drive-line components in place, ensuring that every ounce of horsepower is transferred directly to the track surface.\u003c\/p\u003e\u003ch2\u003eEngineered for Extreme Durability in High-Torque Applications\u003c\/h2\u003e\u003cp\u003eIn the world of competitive racing, durability is non-negotiable. Whether you are running high-revving rotax engines or heavily modified four-strokes, the rotational stress placed on your clutch system is immense. This short steel retaining washer is forged from high-tensile steel, designed specifically to resist the extreme heat and mechanical stress that cause lesser hardware to warp or fail. By maintaining a rigid, secure hold on your Bully 1\" Turbo clutch, it prevents the micro-movements that lead to premature wear and inconsistent engagement profiles.\u003c\/p\u003e\u003ch2\u003ePrecision Fit for Wheels Parts and Drive-Line Systems\u003c\/h2\u003e\u003cp\u003ePrecision engineering extends beyond the engine block. Just as you wouldn't compromise on wheel discs or critical wheels parts, your clutch retaining hardware demands the exact same level of scrutiny. The compact profile of this washer is tailored for shorter assemblies, eliminating excess bulk and reducing unnecessary rotational mass. While many drivers focus their attention and budget on a flashy go kart steering wheel upgrade for better tactile feel, seasoned professionals know that true reliability and race-winning performance start deep within the drive-line.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eExact Fitment:\u003c\/strong\u003e Tailored specifically for Bully 1\" Turbo clutches requiring shorter assemblies.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh-Tensile Steel:\u003c\/strong\u003e Forged to withstand extreme rotational forces without warping or bending.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCorrosion Resistant:\u003c\/strong\u003e Treated finish prevents rust and degradation over multiple harsh race seasons.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVibration Dampening:\u003c\/strong\u003e Locks drive-line components securely to prevent power-robbing slippage and vibration.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompact Profile:\u003c\/strong\u003e Ideal for tight clearance setups without adding excess rotational mass to the crank.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConsistent Engagement:\u003c\/strong\u003e Promotes faster, more predictable clutch lock-up off the corners for better exit speed.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRace-Proven Reliability:\u003c\/strong\u003e Tested under the harshest track conditions to guarantee maximum durability.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eDon't let a compromised clutch assembly ruin your race weekend. Upgrade your hardware with the Bully 1\" Turbo Short Steel Retaining Washer and experience the peace of mind that comes with professional-grade fastening. Trust in Buller Built engineering to keep your kart performing at its peak, lap after grueling lap.\u003c\/p\u003e\n\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eQ: Is this retaining washer compatible with all Bully clutches?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eA:\u003c\/strong\u003e This specific washer (BC098-605) is designed for 1\" Turbo clutches that require a shorter assembly profile. Please verify your specific clutch model and clearance requirements before installation.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: Why should I use a steel retaining washer instead of a standard one?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eA:\u003c\/strong\u003e High-tensile steel provides superior resistance to the extreme heat and rotational stress found in open and modified racing classes. It prevents the warping and bending that can lead to clutch slippage or mechanical failure during a race.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: Does this washer help with clutch engagement?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eA:\u003c\/strong\u003e Yes. By ensuring a rigid, secure hold on your drive-line components, this washer eliminates micro-movements, which promotes more consistent and predictable clutch lock-up off the corners.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: How often should I inspect my clutch retaining hardware?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eA:\u003c\/strong\u003e You should inspect your clutch hardware before every race weekend. Look for signs of wear, deformation, or rust. If the washer shows any signs of warping, it should be replaced immediately to maintain proper clamping force.\u003c\/p\u003e\n\n\u003ch3\u003eRelated Products From Vendor\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/bully-turbo-pressure-plate-bcppt\"\u003eBully 1\" Turbo Pressure Plate - Progressive Engagement - Dirt Oval \u0026amp; Sprint\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/bully-clutch-1-turbo-driver-14-tooth-35-bcd14star\"\u003eBully Clutches 1\" Turbo Clutch Driver - 14-Tooth #35 Chain - Sprint \u0026amp; Oval Racing\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/bully-floater-plate-110-bcfp110\"\u003eBully 1\" Turbo .110 Floater Plate - Four-Disk Clutch Standard - Sprint \u0026amp; Oval\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/bully-clutch-1-turbo-ring-gear-30t-bc098-430\"\u003eBully 1\" Turbo Clutch Ring Gear - 30 Teeth - Mini Cup \u0026amp; Outboard Racing\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/bully-four-disk-mini-cup-clutch-no-sprocket-included-outboard-1-0-mounting-bc4dmcob-ns\"\u003eBully Four-Disk Mini Cup Turbo Clutch - 1.0\" Outboard Mount - Big Block PTO\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Bully Clutches","offers":[{"title":"Default Title","offer_id":52562647843134,"sku":"BC098-605","price":9.91,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0962\/4721\/8494\/files\/bully1turbo-bully-1-turbo-steel-retaining-washer-short-bc098-605.jpg?v=1763113578"},{"product_id":"bully-turbo-pressure-plate-bcppt","title":"Bully 1\" Turbo Pressure Plate - Progressive Engagement - Dirt Oval \u0026 Sprint","description":"\u003cp\u003eMaximize the performance of your \u003cstrong\u003eracing go kart parts\u003c\/strong\u003e with the Bully 1\" Turbo Pressure Plate, engineered to eliminate clutch slip and deliver instantaneous power transfer from the crank to the track. Designed specifically for 1\" Turbo clutch assemblies, this pressure plate features a precision-machined curvature that ramps up clamping force on the friction discs. Instead of suffering through delayed hook-up or erratic engagement, drivers experience a progressive, tunable bite that translates raw throttle into immediate acceleration. Whether you are exiting a tight hairpin or launching off the grid, this component ensures your driveline operates at peak efficiency without fading under extreme thermal loads.\u003c\/p\u003e\u003ch2\u003eSynergy Between Your Engine and Motor\u003c\/h2\u003e\u003cp\u003eA high-performance clutch setup is the critical bridge between your \u003cstrong\u003eengine and motor\u003c\/strong\u003e package and the rear axle. The Bully Turbo Pressure Plate optimizes this connection by utilizing an advanced material blend that resists warping during intense heat cycles. By maintaining a perfectly flat mating surface, it guarantees 95% engagement efficiency over extended runs. When tuning your kart for specific track conditions, the plate facilitates precise spring pressure adjustments, allowing mechanics to dial in the exact RPM engagement point required for maximum torque delivery.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdvanced thermal resistance:\u003c\/strong\u003e Proprietary alloy blend prevents warping and maintains structural integrity during high-heat race conditions.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOptimized weight distribution:\u003c\/strong\u003e Precisely balanced to reduce rotational inertia, allowing the engine to spool up faster.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProgressive engagement curvature:\u003c\/strong\u003e Engineered surface profile eliminates harsh jerking for smooth, predictable power delivery.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTunable spring compatibility:\u003c\/strong\u003e Seamlessly integrates with various spring rates for track-specific RPM engagement tuning.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMulti-disk integration:\u003c\/strong\u003e Perfectly matches four-disk configurations to provide multi-stage grip and superior torque holding.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConsistent clamping force:\u003c\/strong\u003e Prevents clutch fade and maintains 95% efficiency even during grueling endurance mains.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrecision machined tolerances:\u003c\/strong\u003e Ensures synchronized operation with Bully floater plates and bearings for a flawless rebuild.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eComplementing Your Kart Steering Wheel and Chassis\u003c\/h2\u003e\u003cp\u003ePredictable power delivery does more than just lower lap times; it fundamentally changes how you handle the chassis. When your clutch engages smoothly, you spend less time fighting the \u003cstrong\u003ekart steering wheel\u003c\/strong\u003e to correct snap-oversteer and more time focusing on hitting your apexes. The Bully Turbo Pressure Plate provides the modulation necessary to confidently push the limits of tire adhesion, especially on low-grip dirt ovals or technical paved sprint tracks. Consistent bite points mean you can trust the rear end to step out exactly when you want it to, enhancing overall driver control.\u003c\/p\u003e\u003ch2\u003eUpgrading Beyond the Kart Brake Kit\u003c\/h2\u003e\u003cp\u003eWhile many racers focus heavily on stopping power by upgrading their \u003cstrong\u003ekart brake kit\u003c\/strong\u003e, true track dominance requires equal attention to acceleration. Losing ground in the first 50 feet out of a corner is a deficit that even the best brakes cannot overcome. By installing the genuine Bully BCPPT pressure plate, you secure the clamping power needed for explosive straight-line blasts. Easy to install with standard pit tools, stocking these plates in your trailer ensures your multi-kart team remains race-ready, streamlining rebuilds and keeping you ahead of the competition.\u003c\/p\u003e\n\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eQ: Is this pressure plate compatible with all Bully Turbo clutches?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eA:\u003c\/strong\u003e This plate is specifically engineered for 1\" Turbo clutch assemblies. Please ensure your clutch setup utilizes the 1\" mounting configuration before installation.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: How often should I inspect my pressure plate for wear?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eA:\u003c\/strong\u003e You should inspect the plate during every clutch rebuild. Look for signs of heat checking, warping, or uneven wear patterns. If the mating surface is no longer perfectly flat, it should be replaced to maintain the 95% engagement efficiency.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: Can I use this with different spring rates?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eA:\u003c\/strong\u003e Yes, the Bully Turbo Pressure Plate is designed to be tunable. It integrates seamlessly with various spring rates, allowing you to adjust your RPM engagement point to match specific track conditions.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: Does this plate require special tools for installation?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eA:\u003c\/strong\u003e No, the plate is designed for easy installation using standard pit tools. It is built to work in synchronization with standard Bully floater plates and bearings for a straightforward rebuild process.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: Why is the curvature of the plate important?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eA:\u003c\/strong\u003e The precision-machined curvature provides progressive engagement. This eliminates the harsh \"jerking\" sensation found in inferior plates, resulting in smoother, more predictable power delivery off the corners.\u003c\/p\u003e\n\n\u003ch3\u003eRelated Products From Vendor\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/bully-floater-plate-110-bcfp110\"\u003eBully 1\" Turbo .110 Floater Plate - Four-Disk Clutch Standard - Sprint \u0026amp; Oval\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/bully-clutch-1-turbo-driver-14-tooth-35-bcd14star\"\u003eBully Clutches 1\" Turbo Clutch Driver - 14-Tooth #35 Chain - Sprint \u0026amp; Oval Racing\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/bully-clutch-spring-085-black-bcsb\"\u003eBully Clutches 6-Spring Black Clutch Spring - .085\" Wire - Adult \u0026amp; Junior Sprint\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/bully-1-turbo-steel-retaining-washer-short-bc098-605\"\u003eBully 1\" Turbo Short Steel Retaining Washer - High-Strength Fastener - Open\/Modified Class\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/bully-clutch-1-turbo-ring-gear-30t-bc098-430\"\u003eBully 1\" Turbo Clutch Ring Gear - 30 Teeth - Mini Cup \u0026amp; Outboard Racing\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Bully Clutches","offers":[{"title":"Default Title","offer_id":52562649186622,"sku":"BCPPT","price":64.69,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0962\/4721\/8494\/files\/bully1turbo-bully-turbo-pressure-plate-bcppt.jpg?v=1763113610"},{"product_id":"bully-turbo-inner-thrust-bearing-bctbstar","title":"Bully Turbo Inner Thrust Bearing for Axial Load Management","description":"\u003cul\u003e\n\u003cli\u003eSpecialized thrust design handles end-loads from clutch engagement.\u003c\/li\u003e\n\u003cli\u003ePrecision tolerances for zero play in inner clutch assembly.\u003c\/li\u003e\n\u003cli\u003eExtends life of pressure plates and springs under race conditions.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eFacing clutch binding that hampers acceleration? The Bully Turbo Inner Thrust Bearing steps in to distribute forces evenly, keeping your 1\" Turbo system responsive. This often-overlooked part is key to maintaining consistent engagement points, vital for precise control during starts and shifts.\u003c\/p\u003e\u003cp\u003eIntegrated into Bully's high-end clutches, it reduces friction heat buildup, allowing sustained performance over long heats. With SKU: BCTBSTAR, source the exact replacement to minimize downtime. Kart mechanics praise its role in fine-tuning setups for different track surfaces, indirectly aiding faster corner exits by stabilizing the drivetrain.\u003c\/p\u003e\u003cp\u003eCompact yet tough, it fits snugly to support organized, efficient builds. Invest here for the edge that turns close races into victories.\u003c\/p\u003e\n\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eQ: What is the primary function of the Bully Turbo Inner Thrust Bearing?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eA:\u003c\/strong\u003e This bearing is designed to handle the intense end-loads generated during clutch engagement. By distributing these forces evenly, it prevents clutch binding, ensures consistent engagement points, and reduces friction heat buildup.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: How does this bearing improve my kart's performance?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eA:\u003c\/strong\u003e By maintaining precise tolerances and reducing internal friction, it allows your 1\" Turbo clutch system to remain responsive. This stability is crucial for consistent starts and helps stabilize the drivetrain for faster, more efficient corner exits.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: When should I replace my inner thrust bearing?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eA:\u003c\/strong\u003e You should inspect this bearing if you notice inconsistent engagement, sluggish acceleration, or signs of excessive heat in the clutch assembly. Replacing it during routine maintenance helps prevent premature wear on your pressure plates and springs.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: Is this bearing compatible with all Bully clutches?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eA:\u003c\/strong\u003e This specific part (BCTBSTAR) is engineered for the Bully 1\" Turbo system. Always ensure you are matching the bearing to your specific clutch model to maintain the required precision tolerances.\u003c\/p\u003e\n\n\u003ch3\u003eRelated Products From Vendor\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/bully-turbo-drive-hub-bcdhstar\"\u003eBully Turbo Drive Hub for Star Clutch Systems\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/bully-turbo-driver-bearing-bcdbstar\"\u003eBully Turbo Driver Bearing for Smooth Clutch Operation\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/bully-turbo-inner-thrust-washer-sold-each-bctwstar\"\u003eBully Turbo Inner Thrust Washer Individual Unit\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/bully-1-turbo-outer-thrust-washer-bcotwstar\"\u003eReliable Bully 1\" Turbo Outer Thrust Washer for Smooth Operation\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/bully-turbo-star-retaining-bolt-bcrbstar\"\u003eBully Turbo Star Retaining Bolt 3\/8-24 x 1.0\"\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Bully","offers":[{"title":"Default Title","offer_id":52562657739070,"sku":"BCTBSTAR","price":7.96,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0962\/4721\/8494\/files\/bully1turbo-bully-turbo-inner-thrust-bearing-bctbstar.jpg?v=1763113798"},{"product_id":"bully-clutch-lever-ball-lever-style-12-levers-available-fcfs-bcwlb","title":"Ball-Style Bully Clutch Lever for Enhanced Control (Limited Stock)","description":"\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eBall Design:\u003c\/b\u003e Offers smooth, ergonomic actuation for quick shifts.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOEM Part #098-115B:\u003c\/strong\u003e Guaranteed compatibility and quality.\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eLimited Availability:\u003c\/em\u003e 12 levers FCFS—act fast for race prep.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eControl is everything in karting, and the Bully Clutch Ball Lever Style delivers it with finesse. This lever's rounded ball end facilitates effortless movement, reducing fatigue during long sessions while enabling precise tension settings.\u003c\/p\u003e\u003cp\u003eWhy choose this lever? It directly impacts how your clutch engages, allowing you to dial in the perfect bite point for explosive launches. Racers use it to adapt to varying track surfaces, ensuring consistent power delivery that shaves time off laps. Its robust build withstands repeated use, keeping your drive-line components reliable and organized. With only 12 available on a first-come, first-served basis, securing one means staying ahead of competitors who settle for less. The SKU BCWLB tags it perfectly for your inventory. Imagine threading the needle through tight corners with confidence, knowing your lever responds instantly to inputs. This isn't just a part—it's your ticket to mastering clutch modulation, turning potential losses into wins. For Bully 1\" Turbo and similar systems, it streamlines adjustments, making pit stops faster and more efficient.\u003c\/p\u003e\u003cp\u003eElevate your racing edge; this lever ensures every pull is purposeful, driving you faster toward victory.\u003c\/p\u003e\n\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eQ: Is this ball-style lever compatible with my Bully clutch?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eA:\u003c\/strong\u003e This lever (OEM #098-115B) is designed for Bully 1\" Turbo and similar systems. Please verify your specific clutch model to ensure compatibility with this lever style.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: How does the ball-style design improve my kart's performance?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eA:\u003c\/strong\u003e The rounded ball end provides a more ergonomic contact point, allowing for smoother, more consistent clutch actuation. This helps you dial in your bite point more accurately for explosive launches and better modulation out of tight corners.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: Does this lever require special tools for installation?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eA:\u003c\/strong\u003e Installation is straightforward for those familiar with Bully clutch maintenance. Ensure you have the correct dowel pins and retaining hardware on hand to secure the lever properly within the clutch assembly.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: Why is there limited stock available?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eA:\u003c\/strong\u003e We currently have a limited batch of 12 units available on a first-come, first-served basis. We recommend securing your lever early to ensure you have the necessary components for your upcoming race prep.\u003c\/p\u003e\n\n\u003ch3\u003eRelated Products From Vendor\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/bully-clutch-lever-dowell-pin-6-spring-fcdc-dp6\"\u003eBully 6-Spring Clutch Lever Dowel Pin for Stable Fit\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/bully-clutch-lever-dowell-pin-4-spring-bcdp4\"\u003eBully 4-Spring Clutch Lever Dowel Pin\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/bully-clutch-lever-weight-bolt-bcwb\"\u003eStainless Steel Bully Clutch Lever Weight Bolt 10-32 x 1\/2\"\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/bully-clutch-lever-weight-nut-bcwn\"\u003eSecure Bully Clutch Lever Weight Nut for Tuning\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/bully-clutch-spring-adjuster-nut-10-32-thread-bcsn\"\u003e10-32 Thread Bully Clutch Spring Adjuster Nut for Fine Tuning\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Bully","offers":[{"title":"Default Title","offer_id":52562663375166,"sku":"BCWLB","price":19.87,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0962\/4721\/8494\/files\/bully1turbo-bully-clutch-lever-ball-lever-style-12-levers-available-fcfs-bcwlb.jpg?v=1763113943"},{"product_id":"bully-floater-plate-095-bcfp095","title":".095\" Bully Floater Plate for Reduced Air Gap in Clutches","description":"\u003cp\u003eReduce inefficiencies in your clutch stack by adding the .095\" Bully Floater Plate, an optional upgrade that tightens tolerances for better contact and quicker response. It's the standard first floater in four-disk 1.0\" Turbo and 3\/4\" jackshaft clutches.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eAir Gap Reduction:\u003c\/strong\u003e Brings plates closer for immediate engagement.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eMulti-Compatibility:\u003c\/b\u003e Fits Bully, Horstman MDC, and Greased Lightning (upgrading from .085\").\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePerformance Standard:\u003c\/strong\u003e Essential in four-disk configurations.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThis plate is a smart choice for optimizing drivetrain flow, ensuring power hits the chain without delay. By minimizing gaps, it sharpens throttle feel, allowing precise control in corners where hesitation costs positions. Kart tuners value its role in customizing stack heights, organizing internals for balanced friction. The .095\" thickness provides just enough space to prevent binding while maximizing grip, ideal for high-torque applications. SKU: BCFP095. Its versatility extends to outboard mini cup clutches, making it a go-to for diverse racing classes. Install one to experience snappier shifts and sustained speeds, transforming your kart's acceleration profile. For teams running Horstman or similar, it seamlessly upgrades older .085\" standards, streamlining compatibility and maintenance. Ultimately, this floater helps you go faster by refining how energy moves through your setup, keeping everything organized and race-ready.\u003c\/p\u003e\n\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eQ: Why should I choose the .095\" floater plate over other sizes?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eA:\u003c\/strong\u003e The .095\" plate is specifically designed to reduce the air gap in your clutch stack. By tightening these tolerances, you achieve more immediate engagement and a sharper throttle response, which is critical for high-torque racing applications.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: Is this plate compatible with non-Bully clutches?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eA:\u003c\/strong\u003e Yes, this plate is designed for multi-compatibility. It fits Bully, Horstman MDC, and Greased Lightning clutches, making it an excellent upgrade if you are currently running an older .085\" standard.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: How does the floater plate thickness affect my kart's performance?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eA:\u003c\/strong\u003e The thickness of the floater plate determines the internal stack height. The .095\" size provides the optimal balance to prevent binding while maximizing friction disc grip, ensuring power is transferred to the chain without hesitation.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: When should I replace my current floater plate?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eA:\u003c\/strong\u003e You should consider replacing or upgrading your floater plate if you notice excessive clutch slip, inconsistent engagement, or if you are tuning your stack height to improve acceleration profiles for specific track conditions.\u003c\/p\u003e\n\n\u003ch3\u003eRelated Products From Vendor\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/bully-floater-plate-065-bcfp065\"\u003e0.065\" Bully Floater Plate for Compatible Clutch Systems\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/bully-floater-plate-100-bcfp100\"\u003e.100\" Bully Floater Plate for Middle Stack Positioning\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/bully-floater-plate-120-bcfp120\"\u003eBully .120 Optional Floater Plate for Reduced Air Gap\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/bully-clutch-friction-disc-oem-8-tab-bcfd\"\u003eOEM Bully Clutch 8-Tab Friction Disc for Superior Grip\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/bully-clutch-spring-height-gauge-bcshg\"\u003eBully Clutch Spring Height Gauge for Accurate Measurements\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Bully","offers":[{"title":"Default Title","offer_id":52562670584126,"sku":"BCFP095","price":29.83,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0962\/4721\/8494\/files\/bully1turbo-bully-floater-plate-095-bcfp095.jpg?v=1763114097"},{"product_id":"bully-floater-plate-100-bcfp100","title":".100\" Bully Floater Plate for Middle Stack Positioning","description":"\u003cstrong\u003eStandard in High-Performance Builds:\u003c\/strong\u003e The .100\" Bully Floater Plate serves as the middle floater in 1.0\" four-disk Turbo clutches and the 3\/4\" four-disk jackshaft versions, plus activator and middle in outboard mini cup setups. It upgrades .085\" standards in Horstman MDC and Greased Lightning models for tighter stacking.\n\n\u003cp\u003eWhy incorporate this plate? It optimizes plate spacing to enhance friction surface contact, reducing slip and heat for more direct power routing. This means your kart hooks up sooner, delivering that burst needed for overtaking maneuvers.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cem\u003eVersatile Placement:\u003c\/em\u003e Activator side or central in multi-disk arrays.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility Boost:\u003c\/strong\u003e Seamless with legacy clutch brands.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eEfficiency Gain:\u003c\/b\u003e Less energy wasted on gaps equals faster laps.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eFor racers, this floater organizes the clutch interior logically, making disassembly and reassembly straightforward—crucial for quick turnaround between heats. Its precise .100\" dimension ensures even pressure distribution, prolonging disc and spring life while sharpening overall response. Imagine maintaining top-end velocity without fade; that's the edge it provides in endurance races. SKU: BCFP100 identifies it reliably. Whether standard or as an upgrade, it refines your drive-line's harmony, helping you navigate technical tracks with ease. Compatible across Bully's range, it supports customized builds that adapt to engine characteristics, keeping your setup agile and organized for every session.\u003c\/p\u003e\n\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eQ: When should I use the .100\" Bully Floater Plate instead of the standard .085\" plate?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eA:\u003c\/strong\u003e You should upgrade to the .100\" plate when you need to tighten your clutch stack or optimize spacing in 1.0\" four-disk Turbo clutches and 3\/4\" four-disk jackshaft setups. It is specifically designed to reduce slip and heat by improving friction surface contact.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: Is this floater plate compatible with non-Bully clutches?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eA:\u003c\/strong\u003e Yes, this plate is designed for seamless compatibility with legacy clutch brands, including Horstman MDC and Greased Lightning models, making it a versatile choice for various high-performance builds.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: How does the .100\" dimension affect my clutch performance?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eA:\u003c\/strong\u003e The precise .100\" thickness ensures even pressure distribution across your clutch discs. This helps reduce energy waste caused by excessive gaps, leading to a more direct power transfer, faster engagement, and prolonged life for your discs and springs.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: Can I use this plate in different positions within the clutch?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eA:\u003c\/strong\u003e Absolutely. This floater plate is versatile and can be used as the activator plate or as a central floater in multi-disk arrays, depending on your specific clutch configuration.\u003c\/p\u003e\n\n\u003ch3\u003eRelated Products From Vendor\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/bully-clutch-friction-disc-oem-8-tab-bcfd\"\u003eOEM Bully Clutch 8-Tab Friction Disc for Superior Grip\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/bully-floater-plate-065-bcfp065\"\u003e0.065\" Bully Floater Plate for Compatible Clutch Systems\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/bully-floater-plate-120-bcfp120\"\u003eBully .120 Optional Floater Plate for Reduced Air Gap\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/bully-floater-plate-095-bcfp095\"\u003e.095\" Bully Floater Plate for Reduced Air Gap in Clutches\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/bully-clutch-shim-010-silver-bcs010\"\u003eSilver .010\" Bully Clutch Shim for Accurate Clutch Tuning\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Bully","offers":[{"title":"Default Title","offer_id":52562670616894,"sku":"BCFP100","price":29.83,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0962\/4721\/8494\/files\/bully1turbo-bully-floater-plate-100-bcfp100.jpg?v=1763114099"},{"product_id":"bully-floater-plate-110-bcfp110","title":"Bully 1\" Turbo .110 Floater Plate - Four-Disk Clutch Standard - Sprint \u0026 Oval","description":"\u003ch2\u003eBully .110 Floater Plate: Precision Engagement for Four-Disk Clutches\u003c\/h2\u003e\n\u003cp\u003eMinimizing clutch air gaps is the definitive secret to launching off the grid in competitive racing, and the Bully .110 Floater Plate delivers the exact friction engagement needed for four-disk setups. Positioned nearest to the drive hub plate, this .110-inch thick floater provides the foundational structural support required for consistent, fade-free power delivery. By eliminating the parasitic drag that plagues worn clutch assemblies, this precision-machined plate ensures that every ounce of torque generated by your engine is instantly transferred to the rear wheels. It is the standard inclusion in Bully 1\" Turbo clutches, engineered specifically to handle the extreme heat and mechanical stress of high-stakes sprint and oval track sessions.\u003c\/p\u003e\n\n\u003ch2\u003eBeyond the LO206 Carburetor Kit: Maximizing Drivetrain Efficiency\u003c\/h2\u003e\n\u003cp\u003eMany drivers obsess over engine tuning, endlessly searching for the perfect carb for go kart applications or dialing in a new lo206 carburetor kit to find a tenth of a second. However, true track dominance is won in the drivetrain. Just as you wouldn't compromise on high-performance brake replacements for corner entry or settle for anything less than the best helmets for driver safety, your clutch assembly demands elite, precision-machined components. Upgrading to the exact .110 thickness optimizes your entire driveline, preventing the high-RPM slippage that costs you positions on the final lap.\u003c\/p\u003e\n\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eOptimized Friction Engagement:\u003c\/strong\u003e Minimizes air gaps between discs to promote instantaneous acceleration and smoother shifts out of tight corners.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFour-Disk Compatibility:\u003c\/strong\u003e Specifically designed as the go-to standard floater positioned nearest to the drive hub in Bully four-disk clutch models.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThermal Distortion Resistance:\u003c\/strong\u003e Constructed from hardened, heat-treated materials that withstand the intense temperatures of aggressive track sessions.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEliminates Parasitic Drag:\u003c\/strong\u003e Reduces unwanted play within the clutch basket, ensuring your engine's power output isn't lost to drivetrain inefficiency.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeamless Integration:\u003c\/strong\u003e Fits standard Bully baskets and hubs flawlessly, making it a straightforward upgrade for experienced mechanics and engine builders.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConsistent Lap Times:\u003c\/strong\u003e Maintains critical clutch integrity under extreme pressure, preventing the late-race slippage that plagues inferior floaters.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eInstallation of the BCFP110 floater plate directly translates to noticeable improvements in throttle responsiveness during aggressive overtaking maneuvers. Whether you are competing in heavy-duty senior classes or tuning a high-horsepower modified setup, this component delivers the rock-solid stability necessary to push your machine harder. Stop losing power through a sloppy clutch assembly—rebuild your Bully 1\" Turbo with the correct .110 floater and experience the immediate, aggressive lock-up required to dominate the podium.\u003c\/p\u003e\n\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eQ: Why is the .110 thickness important for my Bully clutch?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eA:\u003c\/strong\u003e The .110 floater plate is a critical component in maintaining the correct air gap in a four-disk clutch assembly. Using the precise thickness ensures proper friction engagement and prevents the slippage that occurs when the clutch stack is worn or improperly spaced.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: When should I replace my clutch floater plate?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eA:\u003c\/strong\u003e You should inspect your floater plate during every clutch rebuild. If you notice signs of heat checking, warping, or if your clutch is slipping despite having fresh friction disks, the floater plate is likely worn and needs to be replaced to restore consistent power transfer.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: Is this plate compatible with all Bully clutches?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eA:\u003c\/strong\u003e This specific .110 floater is designed for Bully 1\" Turbo four-disk clutch setups. It is positioned nearest to the drive hub. Always verify your specific clutch model and disk count before installation to ensure proper fitment.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: Can I use this plate in a two-disk or three-disk setup?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eA:\u003c\/strong\u003e No, this plate is specifically engineered for the stack height and geometry of Bully four-disk clutch assemblies. Using it in a different configuration will result in incorrect air gaps and poor clutch performance.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: Does this plate require any special maintenance?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eA:\u003c\/strong\u003e Keep the plate clean and free of debris or oil contamination. During your routine maintenance, check the surface for flatness. If the plate shows signs of excessive heat discoloration or scoring, replace it to maintain optimal drivetrain efficiency.\u003c\/p\u003e\n\n\u003ch3\u003eRelated Products From Vendor\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/bully-turbo-pressure-plate-bcppt\"\u003eBully 1\" Turbo Pressure Plate - Progressive Engagement - Dirt Oval \u0026amp; Sprint\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/bully-clutch-1-turbo-driver-14-tooth-35-bcd14star\"\u003eBully Clutches 1\" Turbo Clutch Driver - 14-Tooth #35 Chain - Sprint \u0026amp; Oval Racing\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/bully-clutch-1-turbo-ring-gear-30t-bc098-430\"\u003eBully 1\" Turbo Clutch Ring Gear - 30 Teeth - Mini Cup \u0026amp; Outboard Racing\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/bully-1-turbo-steel-retaining-washer-short-bc098-605\"\u003eBully 1\" Turbo Short Steel Retaining Washer - High-Strength Fastener - Open\/Modified Class\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/bully-four-disk-mini-cup-clutch-no-sprocket-included-outboard-1-0-mounting-bc4dmcob-ns\"\u003eBully Four-Disk Mini Cup Turbo Clutch - 1.0\" Outboard Mount - Big Block PTO\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Bully Clutches","offers":[{"title":"Default Title","offer_id":52562670747966,"sku":"BCFP110","price":29.83,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0962\/4721\/8494\/files\/bully1turbo-bully-floater-plate-110-bcfp110.jpg?v=1763114101"},{"product_id":"bully-floater-plate-120-bcfp120","title":"Bully .120 Optional Floater Plate for Reduced Air Gap","description":"\u003cul\u003e\n\u003cli\u003ePrecision-machined to .120 thickness, this optional floater excels at closing air gaps in multi-disk clutches.\u003c\/li\u003e\n\u003cli\u003eSupplied with various four-disk Bully models to customize setup for specific track conditions.\u003c\/li\u003e\n\u003cli\u003ePromotes tighter tolerances, leading to sharper clutch response and reduced power loss.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eSince its introduction, the Bully .120 Floater Plate has become a favorite among tuners who demand more from their drive-line components. Not a standard install in any single clutch as of recent updates, it offers flexibility to adapt your Bully 1\" Turbo system for oval, dirt, or asphalt racing. By integrating this plate, you achieve better disc alignment, which means less slippage during high-RPM bursts and more consistent torque to the chain.\u003c\/p\u003e\u003cp\u003eImagine hitting the throttle harder out of tight turns without the hesitation that plagues poorly gapped clutches—this plate makes it possible. Its robust build handles the rigors of repeated engagements, extending the life of your friction materials and bearings. For those building custom clutch stacks, it's an indispensable tool to experiment with engagement points, potentially unlocking hidden speed in your kart's powerband. The SKU BCFP120 ensures you get the genuine part every time.\u003c\/p\u003e\u003cp\u003eEasy to swap in during routine maintenance, this floater helps organize your pit setup by standardizing optional upgrades. Kart teams using it report enhanced drivability, especially in endurance races where clutch fatigue can derail a strong run. Elevate your performance without overcomplicating your build; this subtle upgrade yields big results on race day.\u003c\/p\u003e\n\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eQ: What is the primary purpose of the .120 Bully Floater Plate?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eA:\u003c\/strong\u003e The .120 floater plate is designed to reduce the air gap in multi-disk Bully clutches. By closing this gap, you achieve tighter tolerances, which results in sharper clutch engagement, reduced slippage at high RPMs, and more consistent power transfer to the chain.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: How do I know if I need the .120 thickness versus other sizes?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eA:\u003c\/strong\u003e Choosing the right floater plate depends on your specific clutch stack height and track conditions. Tuners use different thicknesses to customize engagement points. If you are experiencing clutch hesitation or excessive slippage, a thicker plate like the .120 can help tighten the stack for better performance.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: Is the .120 Floater Plate compatible with all Bully clutches?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eA:\u003c\/strong\u003e This plate is designed for Bully 1\" Turbo systems. Because it is an optional tuning component rather than a standard install, it is best used by those building custom clutch stacks to optimize their setup for oval, dirt, or asphalt racing.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: Can this plate help extend the life of my clutch components?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eA:\u003c\/strong\u003e Yes. By promoting better disc alignment and reducing slippage during high-RPM bursts, the .120 floater plate helps minimize heat buildup and wear on your friction materials and bearings, leading to increased longevity for your drive-line components.\u003c\/p\u003e\n\n\u003ch3\u003eRelated Products From Vendor\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/bully-floater-plate-100-bcfp100\"\u003e.100\" Bully Floater Plate for Middle Stack Positioning\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/bully-floater-plate-095-bcfp095\"\u003e.095\" Bully Floater Plate for Reduced Air Gap in Clutches\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/bully-floater-plate-065-bcfp065\"\u003e0.065\" Bully Floater Plate for Compatible Clutch Systems\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/bully-clutch-friction-disc-oem-8-tab-bcfd\"\u003eOEM Bully Clutch 8-Tab Friction Disc for Superior Grip\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/bully-clutch-spring-height-gauge-bcshg\"\u003eBully Clutch Spring Height Gauge for Accurate Measurements\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Bully","offers":[{"title":"Default Title","offer_id":52562670813502,"sku":"BCFP120","price":29.83,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0962\/4721\/8494\/files\/bully1turbo-bully-floater-plate-120-bcfp120.jpg?v=1763114102"},{"product_id":"bully-turbo-driver-bearing-bcdbstar","title":"Bully Turbo Driver Bearing for Smooth Clutch Operation","description":"\u003cp\u003eRevolutionize your clutch's efficiency with the Bully Turbo Driver Bearing, a precision-engineered element that supports the driver hub in 1\" Turbo models. By minimizing rotational resistance, it allows smoother power flow from engine to chain, directly contributing to quicker lap times.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eHigh-load capacity to handle torque spikes without binding.\u003c\/li\u003e\n\u003cli\u003eSealed design repels dirt and moisture common in track environments.\u003c\/li\u003e\n\u003cli\u003eEnhances overall driveline balance for reduced vibration.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eIn kart racing, where milliseconds separate winners from the rest, this bearing prevents the subtle drag that builds up over a race. Swap it in during routine servicing to restore that crisp response, especially after dusty sessions that accelerate wear. Racers find it indispensable for keeping clutch temperatures low, preserving friction discs longer and avoiding mid-race failures.\u003c\/p\u003e\u003cp\u003eThe SKU BCDBSTAR guarantees compatibility with Bully Turbo components, making it easy to stock spares for trackside fixes. Its robust construction supports aggressive driving styles, ensuring your kart stays planted and fast through every turn. Organize your toolkit with this essential—it's the small detail that amplifies big performance gains.\u003c\/p\u003e\n\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eQ: When should I replace my Bully Turbo Driver Bearing?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eA:\u003c\/strong\u003e You should inspect your bearing during routine clutch servicing. If you notice increased rotational resistance, excessive vibration, or if the kart feels sluggish coming out of corners after dusty track sessions, it is time to replace the bearing to restore peak efficiency.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: Is this bearing compatible with all Bully clutches?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eA:\u003c\/strong\u003e This specific bearing (SKU BCDBSTAR) is precision-engineered for 1\" Bully Turbo models. Always verify your clutch model before installation to ensure proper fitment and performance.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: How does a new clutch bearing improve my lap times?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eA:\u003c\/strong\u003e By minimizing drag and rotational resistance, this bearing allows for a smoother power transfer from your engine to the chain. Reducing this subtle friction helps keep clutch temperatures lower and ensures your engine maintains optimal RPMs throughout the race.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: Can I use this bearing in high-torque racing conditions?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eA:\u003c\/strong\u003e Yes. The Bully Turbo Driver Bearing is built with a high-load capacity specifically designed to handle the torque spikes and aggressive driving styles common in competitive karting without binding.\u003c\/p\u003e\n\n\u003ch3\u003eRelated Products From Vendor\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/bully-turbo-drive-hub-bcdhstar\"\u003eBully Turbo Drive Hub for Star Clutch Systems\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/bully-turbo-inner-thrust-bearing-bctbstar\"\u003eBully Turbo Inner Thrust Bearing for Axial Load Management\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/bully-1-turbo-outer-thrust-washer-bcotwstar\"\u003eReliable Bully 1\" Turbo Outer Thrust Washer for Smooth Operation\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/bully-turbo-inner-thrust-washer-sold-each-bctwstar\"\u003eBully Turbo Inner Thrust Washer Individual Unit\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/bully-turbo-star-retaining-bolt-bcrbstar\"\u003eBully Turbo Star Retaining Bolt 3\/8-24 x 1.0\"\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Bully","offers":[{"title":"Default Title","offer_id":52562686345534,"sku":"BCDBSTAR","price":17.88,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0962\/4721\/8494\/files\/bully1turbo-bully-turbo-driver-bearing-bcdbstar.jpg?v=1763114329"},{"product_id":"bully-turbo-inner-thrust-washer-sold-each-bctwstar","title":"Bully Turbo Inner Thrust Washer Individual Unit","description":"\u003cp\u003eSold as a single unit, the Bully Turbo Inner Thrust Washer fine-tunes axial spacing in 1\" Turbo clutches, preventing uneven pressure that leads to slippage.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eHardened for repeated use without deformation.\u003c\/li\u003e\n\u003cli\u003ePrevents direct metal-on-metal contact in thrust areas.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eIdeal for builders adjusting stack heights, it ensures smooth operation and helps distribute loads evenly. Pair multiples for complex setups. SKU: BCTWSTAR for authentic fit. This simple addition keeps your clutch reliable, aiding faster, more consistent laps by maintaining alignment.\u003c\/p\u003e\n\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eQ: What is the primary purpose of the Bully Turbo Inner Thrust Washer?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eA:\u003c\/strong\u003e This washer is designed to fine-tune the axial spacing within 1\" Turbo clutches. By maintaining proper spacing, it prevents uneven pressure on the clutch components, which helps eliminate slippage and ensures consistent power transfer.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: Can I use more than one thrust washer in my clutch setup?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eA:\u003c\/strong\u003e Yes. These washers are ideal for builders who need to adjust stack heights. You can pair multiple units to achieve the precise clearance required for your specific clutch configuration.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: Why is it important to use a hardened washer in the clutch assembly?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eA:\u003c\/strong\u003e The clutch environment experiences significant heat and mechanical stress. A hardened washer resists deformation under these loads, ensuring that your alignment remains stable throughout the race, which is critical for consistent lap times.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: Does this washer require any special maintenance?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eA:\u003c\/strong\u003e While the washer is durable, you should inspect it during routine clutch rebuilds. Check for signs of excessive wear or scoring. If the surface is damaged, it should be replaced to prevent further wear on adjacent clutch components.\u003c\/p\u003e\n\n\u003ch3\u003eRelated Products From Vendor\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/bully-turbo-inner-thrust-bearing-bctbstar\"\u003eBully Turbo Inner Thrust Bearing for Axial Load Management\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/bully-1-turbo-outer-thrust-washer-bcotwstar\"\u003eReliable Bully 1\" Turbo Outer Thrust Washer for Smooth Operation\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/bully-turbo-drive-hub-bcdhstar\"\u003eBully Turbo Drive Hub for Star Clutch Systems\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/bully-1-turbo-crank-spacer-bccsstar\"\u003eEssential Bully 1\" Turbo Crank Spacer for Optimal Alignment\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/bully-clutch-spring-height-gauge-bcshg\"\u003eBully Clutch Spring Height Gauge for Accurate Measurements\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Bully","offers":[{"title":"Default Title","offer_id":52562687852862,"sku":"BCTWSTAR","price":2.28,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0962\/4721\/8494\/files\/bully1turbo-bully-turbo-inner-thrust-washer-sold-each-bctwstar.jpg?v=1763114361"},{"product_id":"bully-clutch-lever-dowell-pin-6-spring-fcdc-dp6","title":"Bully 6-Spring Clutch Lever Dowel Pin for Stable Fit","description":"\u003cp\u003eFor 6-spring setups, the Bully Clutch Lever Dowel Pin (OEM #098-001) provides the anchor needed to keep levers true, preventing wobble that hampers performance.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrecise Alignment:\u003c\/strong\u003e Locks levers in place for even spring tension.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eOEM Reliability:\u003c\/b\u003e Matches factory standards.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThis pin organizes your assembly, supporting quicker shifts and speed gains. SKU: FCDC-DP6.\u003c\/p\u003e\n\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eQ: What is the purpose of the Bully Clutch Lever Dowel Pin?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eA:\u003c\/strong\u003e This dowel pin acts as an anchor for your clutch levers. It ensures they remain perfectly aligned and prevents the wobble that can occur during high-RPM operation, which is essential for maintaining consistent spring tension and optimal clutch performance.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: Is this pin compatible with all Bully clutches?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eA:\u003c\/strong\u003e This specific dowel pin (OEM #098-001) is designed specifically for 6-spring clutch setups. Please ensure your clutch configuration matches this requirement before installation.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: How do I know if my dowel pins need to be replaced?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eA:\u003c\/strong\u003e You should inspect your dowel pins during routine clutch maintenance. If you notice signs of wear, bending, or if the levers feel loose or exhibit excessive play, replacing the pins is a cost-effective way to restore stability and prevent uneven wear on your clutch components.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: Does this pin help with shifting performance?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eA:\u003c\/strong\u003e Yes. By locking the levers in place and ensuring even spring tension across the assembly, this pin helps the clutch engage and disengage more predictably, supporting smoother, quicker shifts and better power transfer.\u003c\/p\u003e\n\n\u003ch3\u003eRelated Products From Vendor\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/bully-clutch-spring-height-gauge-bcshg\"\u003eBully Clutch Spring Height Gauge for Accurate Measurements\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/bully-clutch-spring-067-purple-bcsp\"\u003ePurple .067\" Bully Clutch Spring for Custom Engagement Rates\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/bully-clutch-spring-100-blue-bcsbl\"\u003eStiff .100\" Blue Bully Clutch Spring for High-Performance\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/bully-clutch-spring-090-red-bcsr\"\u003eMedium .090\" Red Bully Clutch Spring for Enhanced Grip\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/bully-clutch-spring-adjuster-nut-10-32-thread-bcsn\"\u003e10-32 Thread Bully Clutch Spring Adjuster Nut for Fine Tuning\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Bully","offers":[{"title":"Default Title","offer_id":52562696405310,"sku":"FCDC-DP6","price":3.93,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0962\/4721\/8494\/files\/bully1turbo-bully-clutch-lever-dowell-pin-6-spring-fcdc-dp6.jpg?v=1763114413"},{"product_id":"bully-clutch-1-turbo-ring-gear-hub-bc098-501","title":"Durable Bully 1\" Turbo Clutch Ring Gear Hub for Secure Mounting","description":"\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eStable Foundation:\u003c\/strong\u003e This ring gear hub anchors the gear securely to the clutch, preventing shifts that could disrupt your race rhythm.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVibration Reduction:\u003c\/strong\u003e Minimizes unwanted noise and shake, leading to smoother rides and preserved component longevity.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEasy Integration:\u003c\/strong\u003e Fits precisely within Bully 1\" Turbo systems, simplifying assembly for pit crews.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThe Bully 1\" Turbo Ring Gear Hub might seem like a small part, but its role in maintaining drivetrain integrity is massive. By holding the ring gear firmly in place, it allows for consistent torque application, helping you maintain speed through challenging sections of the track. Racers often overlook hubs until failure strikes, but installing this one upfront keeps your setup organized and ready for action.\u003c\/p\u003e\u003cp\u003eIn competitive karting, where every component must perform, this hub contributes to overall efficiency by ensuring power is delivered without loss. It's particularly beneficial in high-RPM environments, where stability means the difference between podium finishes and pit stops. With SKU BC098-501, sourcing replacements is straightforward, keeping your maintenance routine efficient. Upgrade your clutch setup to experience tighter control and accelerated performance that puts you ahead of the pack.\u003c\/p\u003e\u003cp\u003eCompatible across various Bully configurations, it supports a more streamlined workflow at the track, letting you focus on driving rather than tinkering.\u003c\/p\u003e\n\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eQ: Is this hub compatible with all Bully clutch systems?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eA:\u003c\/strong\u003e This specific hub is designed for Bully 1\" Turbo systems. Please verify your clutch configuration before purchase to ensure a precise fit.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: Why is it important to replace the ring gear hub?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eA:\u003c\/strong\u003e Over time, wear on the hub can lead to gear misalignment and vibration. Replacing it ensures consistent torque delivery and prevents drivetrain failure during high-RPM racing.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: Does this hub require special tools for installation?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eA:\u003c\/strong\u003e It is designed for straightforward integration into the Bully 1\" Turbo system. While standard shop tools are typically sufficient, ensure your clutch assembly is clean and properly aligned during installation for optimal performance.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: How does this hub affect my kart's performance?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eA:\u003c\/strong\u003e By securely anchoring the ring gear, this hub minimizes vibration and power loss, allowing for smoother acceleration and more reliable power transfer through the drivetrain.\u003c\/p\u003e\n\n\u003ch3\u003eRelated Products From Vendor\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/bully-clutch-1-turbo-ring-gear-28t-bc098-428\"\u003eBully 1\" Turbo Clutch Ring Gear 28 Teeth\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/bully-1-turbo-steel-retaining-washer-long-bc098-607\"\u003eHeavy-Duty Bully 1\" Turbo Long Steel Retaining Washer\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/bully-1-turbo-crank-spacer-bccsstar\"\u003eEssential Bully 1\" Turbo Crank Spacer for Optimal Alignment\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/bully-turbo-inner-thrust-bearing-bctbstar\"\u003eBully Turbo Inner Thrust Bearing for Axial Load Management\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/bully-clutch-key-bck\"\u003eBully Standard Clutch Key for Secure Hub Locking\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Bully","offers":[{"title":"Default Title","offer_id":52562697388350,"sku":"BC098-501","price":39.79,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0962\/4721\/8494\/files\/bully1turbo-bully-clutch-1-turbo-ring-gear-hub-bc098-501.jpg?v=1763114427"},{"product_id":"bully-clutch-1-turbo-driver-16-thru-21-tooth-select-driver-size-bcd-star","title":"Bully 1\" TURBO Clutch Driver - 16 to 21 Tooth Options for High-Performance Kart Racing","description":"\u003cp\u003eEnhance your kart's performance with the Bully 1\" TURBO Clutch Driver in the #35 16T configuration, a premium component designed for Viper Big Block Clutches. This specific 16-tooth option is ideal for setups requiring lower gearing and higher torque, perfect for technical tracks or engines with lower RPM capabilities. Crafted from high-strength materials, it ensures reliable engagement and smooth power delivery, making it essential for competitive kart racing.\u003c\/p\u003e\u003cp\u003eThe Bully TURBO Clutch Driver with #35 16T features a robust 1-inch bore that fits seamlessly with standard kart drive-line systems, particularly those using #35 chain. Its precision-machined 16 sprocket teeth provide superior grip and reduced wear, helping you maintain peak efficiency during intense races. Whether you're tuning for sprint tracks or endurance events, this 16T driver optimizes torque transfer from the engine to the rear axle, minimizing slippage and maximizing acceleration in low-speed scenarios.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eKey Benefits:\u003c\/strong\u003e Enhanced durability for long-lasting performance\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVersatile Fit:\u003c\/strong\u003e Compatible with Viper Clutches and various kart chassis\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEasy Installation:\u003c\/strong\u003e Bolt-on design for quick upgrades\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePerformance Optimized:\u003c\/strong\u003e 16T sizing for torque-focused gear ratios\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eAs part of the renowned Bully lineup, this #35 16T clutch driver is trusted by racers worldwide for its quality and reliability. It's ideal for both novice and professional drivers looking to fine-tune their machine. Select the #35 16T to match your engine's RPM range and track conditions, ensuring the best possible setup. Invest in the Bully 1\" TURBO Clutch Driver today and experience the difference in your kart's handling and speed.\u003c\/p\u003e\u003cp\u003ePerfect for drive-line components enthusiasts, this product integrates effortlessly into your existing clutches and parts inventory. Don't settle for subpar performance—choose Bully for superior engineering that keeps you ahead of the competition.\u003c\/p\u003e","brand":"Bully","offers":[{"title":"#35 16T","offer_id":52568999166270,"sku":"BCD**STAR#35 16T","price":39.1,"currency_code":"USD","in_stock":true},{"title":"#35 17T","offer_id":53239549821246,"sku":"BCD**STAR#35 17T","price":39.1,"currency_code":"USD","in_stock":true},{"title":"#35 18T","offer_id":53239549886782,"sku":"BCD**STAR#35 18T","price":39.1,"currency_code":"USD","in_stock":true},{"title":"#35 19T","offer_id":53239549919550,"sku":"BCD**STAR#35 19T","price":39.1,"currency_code":"USD","in_stock":true},{"title":"#35 20T","offer_id":53239549952318,"sku":"BCD**STAR#35 20T","price":39.1,"currency_code":"USD","in_stock":true},{"title":"#35 21T","offer_id":53239549985086,"sku":"BCD**STAR#35 21T","price":39.1,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0962\/4721\/8494\/files\/viperbigblockclutch-bully-clutch-1-turbo-driver-16-thru-21-tooth-select-driver-size-bcd-star.jpg?v=1763125244"},{"product_id":"bully-clutch-1-turbo-ring-gear-22t-26t-35-chain","title":"Bully Clutch 1\" Turbo Ring Gear 22T-26T #35 Chain","description":"\u003cp\u003eEquip your kart with the robust Bully Clutch 1\" Turbo Ring Gear, available in tooth counts from 22T to 26T specifically for #35 chain setups. This essential clutch component delivers consistent performance, making it a go-to choice for racers seeking dependable drivetrain reliability.\u003c\/p\u003e\u003cp\u003eCrafted for 1-inch Turbo clutch systems, these ring gears feature a precise design that pairs seamlessly with Bully Clutch assemblies. Whether you're tuning for track speed or everyday practice, selecting the right tooth size allows customization of your gear ratio to match your engine and track conditions. Specify your size at checkout to get exactly what you need—22T for quicker acceleration or up to 26T for higher top speeds.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eDirect fit for 1\" bore Turbo clutches\u003c\/li\u003e\n\u003cli\u003eOptimized for #35 chain applications\u003c\/li\u003e\n\u003cli\u003eMultiple tooth options: 22T, 23T, 24T, 25T, 26T\u003c\/li\u003e\n\u003cli\u003eBlack finish for durability and style\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eIn kart racing, the ring gear plays a critical role in power transmission from the clutch to the chain. A quality gear like this one minimizes slippage and wear, helping maintain peak efficiency lap after lap. It's straightforward to install with standard tools, and its sturdy construction stands up to the demands of competitive racing environments.\u003c\/p\u003e\u003cp\u003ePerfect for pit crews and builders assembling or refreshing clutch systems. Keep spares on hand to avoid downtime during race weekends. This ring gear supports a wide range of kart setups where Turbo clutches are standard.\u003c\/p\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\u003cdiv\u003e\n\u003cp\u003e\u003cstrong\u003eWhat sizes are available for the Bully Clutch 1\" Turbo Ring Gear?\u003c\/strong\u003e\u003cbr\u003eOptions range from 22T to 26T. Specify your desired tooth count when ordering.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs this ring gear for #35 chain?\u003c\/strong\u003e\u003cbr\u003eYes, it's designed specifically for #35 chain as indicated in the product details.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the bore size?\u003c\/strong\u003e\u003cbr\u003eThe ring gear fits 1-inch Turbo clutch hubs.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I use this with other clutch brands?\u003c\/strong\u003e\u003cbr\u003eIt's optimized for Bully Clutch Turbo models; check compatibility for others.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Bully Clutch","offers":[{"title":"#35 22T","offer_id":53244087894334,"sku":"BC098-4**#35 22T","price":23.69,"currency_code":"USD","in_stock":true},{"title":"#35 23T","offer_id":53244087927102,"sku":"BC098-4**#35 23T","price":23.69,"currency_code":"USD","in_stock":true},{"title":"#35 24T","offer_id":53244087959870,"sku":"BC098-4**#35 24T","price":23.69,"currency_code":"USD","in_stock":true},{"title":"#35 25T","offer_id":53244087992638,"sku":"BC098-4**#35 25T","price":23.69,"currency_code":"USD","in_stock":true},{"title":"#35 26T","offer_id":53244088025406,"sku":"BC098-4**#35 26T","price":23.69,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0962\/4721\/8494\/files\/Bully_Clutch_1__TURBO_Ring_Gear_22T_-_26T___Specify_Size.jpg?v=1774893805"},{"product_id":"bully-turbo-activator-plate-oem-098-260t","title":"Bully Turbo Activator Plate - OEM #098-260T Clutch Component","description":"\u003cdiv class=\"product-description\"\u003e\n\u003ch2\u003eEnhance Your Kart Clutch with Bully Turbo Activator Plate\u003c\/h2\u003e\n\u003cp\u003eDiscover the Bully Turbo Activator Plate, a precision-engineered essential identified as Buller OEM Part #098-260T. This component plays a key role in clutch systems for racing karts, ensuring smooth and reliable operation during high-intensity sessions.\u003c\/p\u003e\n\u003cp\u003eCrafted with the signature Bully Turbo branding, this activator plate features a robust design visible in its detailed construction. The hexagonal shape and numbered positions—clearly marked from 1 to 6—allow for straightforward integration into compatible clutch assemblies. It's built to handle the demands of competitive karting, providing the stability needed for consistent power transfer.\u003c\/p\u003e\n\u003cp\u003eWhether you're maintaining your current setup or upgrading for better responsiveness, this OEM part delivers the authenticity and quality Bully is known for. Racers rely on such hardware to fine-tune their drivetrain, minimizing slippage and maximizing control lap after lap. Pair it with other Bully clutch components for a seamless system that performs under pressure.\u003c\/p\u003e\n\u003cp\u003eKey visual elements include the prominent \"TURBO\" and \"BULLY\" lettering, reinforcing its genuine origins. This plate stands out for its durable black finish and machined edges, ready to bolt into place without hassle.\u003c\/p\u003e\n\u003ch3\u003eWhy Choose This Activator Plate?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eDirect OEM replacement for hassle-free installs\u003c\/li\u003e\n\u003cli\u003eSupports optimal clutch shoe activation\u003c\/li\u003e\n\u003cli\u003eEngineered for kart racing durability\u003c\/li\u003e\n\u003cli\u003eClear markings for precise positioning\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eIdeal for pit crews and builders focused on driveline reliability. Keep your kart responsive and competitive with this trusted piece of hardware.\u003c\/p\u003e\n\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003ch4\u003eWhat is the part number for this Bully Turbo Activator Plate?\u003c\/h4\u003e\n\u003cp\u003eBuller OEM Part #098-260T.\u003c\/p\u003e\n\u003ch4\u003eIs this a genuine Bully component?\u003c\/h4\u003e\n\u003cp\u003eYes, it's the authentic Bully Turbo Activator Plate as specified.\u003c\/p\u003e\n\u003ch4\u003eWhat does this plate do in a kart clutch?\u003c\/h4\u003e\n\u003cp\u003eIt activates the clutch mechanism, aiding in engagement control.\u003c\/p\u003e\n\u003ch4\u003eDoes it fit standard kart clutches?\u003c\/h4\u003e\n\u003cp\u003eDesigned as OEM for Bully Turbo systems; verify compatibility with your setup.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Bully","offers":[{"title":"Default Title","offer_id":53244183052606,"sku":"BCAPT","price":64.18,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0962\/4721\/8494\/files\/Bully_Turbo_Activator_Plate___CURRENTLY_OUT_OF_STOCK.jpg?v=1774895070"},{"product_id":"bully-turbo-steel-clutch-basket-4-disc","title":"Bully TURBO Steel Clutch Basket (4 Disc)","description":"\u003cp\u003eEquip your go-kart with the robust \u003cstrong\u003eBully TURBO Steel Clutch Basket (4 Disc)\u003c\/strong\u003e, a key drivetrain component designed for high-performance racing. Crafted from premium steel, this basket accommodates four discs, delivering dependable clutch operation under intense track conditions.\u003c\/p\u003e\u003cp\u003eThe TURBO model's engineered slots and reinforced structure provide optimal disc alignment and heat dissipation, helping maintain consistent power delivery lap after lap. Ideal for racers seeking reliable engagement and disengagement without slippage, it's a straightforward upgrade for competitive setups.\u003c\/p\u003e\u003cp\u003eSteel construction offers superior strength compared to aluminum alternatives, resisting wear from aggressive driving styles. Whether you're hitting local tracks or pushing for podium finishes, this basket supports your kart's driveline efficiency.\u003c\/p\u003e\u003cp\u003eEasy to install with standard clutch hardware, it pairs seamlessly with Bully clutch systems. Focus on the race while trusting this component to handle the torque.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eHeavy-duty steel build for longevity\u003c\/li\u003e\n\u003cli\u003e4-disc capacity for balanced performance\u003c\/li\u003e\n\u003cli\u003eTURBO design enhances durability\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eKeep your kart responsive and ready with the Bully TURBO Steel Clutch Basket.\u003c\/p\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003eWhat makes the Bully TURBO Steel Basket suitable for racing?\u003c\/strong\u003e Its steel construction and 4-disc design ensure reliable power transfer and heat management during high-speed runs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIs this basket compatible with standard kart clutches?\u003c\/strong\u003e Yes, it fits typical 4-disc centrifugal clutch assemblies in go-karts.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHow does the TURBO model differ from standard baskets?\u003c\/strong\u003e The TURBO features enhanced steel reinforcements for better torque handling.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWhat's the benefit of a steel basket over other materials?\u003c\/strong\u003e Steel provides greater impact resistance and wear tolerance for demanding track use.\u003c\/li\u003e\n\u003c\/ol\u003e","brand":"Bully","offers":[{"title":"Default Title","offer_id":53244196028734,"sku":"BCSB4D","price":79.31,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0962\/4721\/8494\/files\/Bully_TURBO_Steel_Basket_4_disc___CURRENTLY_OUT_OF_STOCK_____ALTERNATE_PART_AVAILABLE___FCDC-SD4T.jpg?v=1774895452"},{"product_id":"bully-2-hole-clutch-lever-oem-098-115","title":"Bully 2-Hole Clutch Lever - OEM #098-115 Go-Kart Replacement","description":"\u003cp\u003eEquip your go-kart with the authentic \u003cstrong\u003eBully Clutch Lever (2 Hole)\u003c\/strong\u003e, the OEM replacement part numbered 098-115. This essential component is designed specifically for Bully clutch assemblies commonly used in competitive karting setups.\u003c\/p\u003e\u003cp\u003eIn the high-stakes world of kart racing, every part must perform flawlessly under pressure. The Bully Clutch Lever ensures smooth clutch operation, allowing for quick engagement and disengagement during acceleration and turns. Its 2-hole design provides secure mounting, making installation straightforward for pit crews and builders alike.\u003c\/p\u003e\u003cp\u003eCrafted to Bully's exacting standards, this lever maintains the integrity of your drivetrain. Whether you're maintaining a clone engine kart or fine-tuning for track days, replacing worn levers prevents slippage and power loss. Kart enthusiasts rely on genuine OEM parts like this to keep their machines responsive and competitive.\u003c\/p\u003e\u003cp\u003eSimple yet critical, the lever interfaces directly with the clutch mechanism, translating pedal input into precise action. Regular inspection and timely replacement extend the life of your entire clutch system, minimizing downtime and maximizing laps.\u003c\/p\u003e\u003cp\u003eIdeal for racers seeking dependable hardware without compromise. Add this Bully OEM lever to your toolkit for consistent results on the circuit.\u003c\/p\u003e\u003ch2\u003eFrequently Asked Questions (FAQs)\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWhat is the OEM part number for this clutch lever?\u003c\/strong\u003e It is Bully OEM Part #098-115.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWhat type of kart clutch does this lever fit?\u003c\/strong\u003e Designed for Bully clutch systems with 2-hole mounting configuration.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIs this a genuine Bully replacement part?\u003c\/strong\u003e Yes, it is the official OEM Bully Clutch Lever (2 Hole).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWhy replace the clutch lever?\u003c\/strong\u003e Worn levers can cause inconsistent engagement, affecting kart performance.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Bully","offers":[{"title":"Default Title","offer_id":53244197208382,"sku":"BCWL","price":11.41,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0962\/4721\/8494\/files\/Bully_Clutch_Lever_2_hole.jpg?v=1774895518"},{"product_id":"bully-1-inch-turbo-clutch-4-disc-6-spring-no-sprocket","title":"Bully 1\" Turbo Clutch - 4-Disc 6-Spring Kart Clutch (No Sprocket)","description":"\u003cp\u003eEquip your kart with the reliable Bully 1\" Turbo Clutch, engineered for high-performance demands. This 4-disc \/ 6-spring configuration delivers precise engagement and smooth power delivery, ideal for competitive racing setups.\u003c\/p\u003e\u003cp\u003e\u003cem\u003eSee all \u003ca href=\"\/collections\/bully-clutches\"\u003eBully clutch models, driver sprockets \u0026amp; mounting keys\u003c\/a\u003e in one place.\u003c\/em\u003e\u003c\/p\u003e\u003cp\u003eKey features include a 1-inch bore tailored for turbo applications, ensuring compatibility with standard kart drivetrains. Note that no sprocket is included—order separately to complete your assembly. Effective from 01.01.2020, every unit comes with the Bully #098-616 Universal Mount Kit, simplifying installation across various chassis configurations.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eRobust 4-disc design for enhanced durability under load\u003c\/li\u003e\n\u003cli\u003e6-spring setup optimizes slip and engagement points\u003c\/li\u003e\n\u003cli\u003eUniversal mount kit included for versatile mounting\u003c\/li\u003e\n\u003cli\u003e1\" Turbo sizing matches popular kart engine outputs\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eBuilt to withstand the rigors of track use, this clutch supports efficient torque transfer without unnecessary complexity. Perfect for racers seeking dependable driveline performance. Pair it with your choice of sprocket for a custom fit.\u003c\/p\u003e\u003ch3\u003eProduct Highlights\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e4-disc \/ 6-spring for smooth, reliable power engagement\u003c\/li\u003e\n\u003cli\u003e1-inch Turbo bore fits high-output kart setups precisely\u003c\/li\u003e\n\u003cli\u003eIncludes Bully #098-616 Universal Mount Kit for easy install\u003c\/li\u003e\n\u003cli\u003eProven design effective from 01.01.2020 updates\u003c\/li\u003e\n\u003cli\u003eHeavy-duty construction handles racing stresses\u003c\/li\u003e\n\u003cli\u003eSprocket ordered separately for tailored gearing\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eIs a sprocket included with this clutch?\u003c\/strong\u003e\u003cbr\u003eNo sprocket is included; it must be ordered separately to match your gearing needs.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat mount kit is provided?\u003c\/strong\u003e\u003cbr\u003eEach clutch includes the Bully #098-616 Universal Mount Kit for straightforward installation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the bore size?\u003c\/strong\u003e\u003cbr\u003eThe clutch features a 1-inch bore designed for Turbo applications.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhen was this configuration updated?\u003c\/strong\u003e\u003cbr\u003eEffective from 01.01.2020, incorporating the latest improvements.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this suitable for kart racing?\u003c\/strong\u003e\u003cbr\u003eYes, the 4-disc \/ 6-spring setup is optimized for kart drivetrain performance.\u003c\/p\u003e","brand":"Bully","offers":[{"title":"Default Title","offer_id":53244363571518,"sku":"BCTURBO-NS","price":519.06,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0962\/4721\/8494\/files\/Bully_Clutch_1__TURBO_4-disc___6-spring_NO_SPROCKET_INCLUDED___CURRENTLY_OUT_OF_STOCK.jpg?v=1774899419"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0962\/4721\/8494\/collections\/Bully_Clutch_1__TURBO_4-disc___6-spring_NO_SPROCKET_INCLUDED___CURRENTLY_OUT_OF_STOCK.jpg?v=1788978808","url":"https:\/\/swiftkarting.com\/collections\/bully-1-inch-turbo-kart-clutch-parts-35-chain.oembed","provider":"Swift Karting","version":"1.0","type":"link"}