{"title":"5\/16 Inch Kart Tie Rods and Ends","description":"\u003cp\u003e5\/16 inch kart heim joints, jam nuts, and related washers for smaller-thread steering ends. Choose left-hand or right-hand thread as required.\u003c\/p\u003e","products":[{"product_id":"hj516lh-5-16-left-hand-heim-hj516lh","title":"5\/16 Inch Left Hand Threaded Heim Joint for Kart Steering Adjustments","description":"\u003cp\u003eThread direction matters in steering— this 5\/16-inch left hand heim joint ensures counterclockwise adjustments without loosening the assembly, a game-changer for maintenance-free races.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eStandard Fit:\u003c\/b\u003e 5\/16-24 threads mate perfectly with common tie rods.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eSpherical Freedom:\u003c\/b\u003e Ball-and-socket design absorbs misalignment, reducing bind in dynamic conditions.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eTrack-Ready:\u003c\/b\u003e Zinc plating fights corrosion for reliable performance.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eIdeal for fine-tuning toe and camber on the fly, it helps racers adapt to changing grip levels, directly boosting cornering speeds. Pair it with right-hand counterparts for balanced steering. SKU: HJ516LH.\u003c\/p\u003e\n\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eQ: Why do I need a left-hand thread heim joint for my kart steering?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eA:\u003c\/strong\u003e Left-hand thread heim joints are essential for tie rods because they allow you to adjust the length of the steering linkage by simply rotating the rod. When paired with a right-hand thread joint on the opposite end, you can fine-tune your toe settings without having to disconnect the rod from the spindle or steering column.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: How do I know if this 5\/16-inch heim joint will fit my kart?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eA:\u003c\/strong\u003e This joint features a 5\/16-24 thread pitch. Check your existing tie rods to ensure they are tapped for 5\/16-inch hardware. If your kart uses metric steering components, this imperial-sized joint will not be compatible.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: What is the benefit of the spherical ball-and-socket design?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eA:\u003c\/strong\u003e The spherical design allows for a range of motion that standard rod ends cannot provide. This helps eliminate binding in the steering linkage as the kart chassis flexes through corners, ensuring smooth and predictable steering input.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: Do I need to lubricate this heim joint?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eA:\u003c\/strong\u003e While these joints are zinc-plated for corrosion resistance, keeping them clean of track debris and grit is recommended. If you notice any stiffness or \"notchiness\" in the movement, it is time to replace the joint to ensure steering precision.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: Can I use this on both sides of my tie rod?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eA:\u003c\/strong\u003e No, you should use one left-hand thread joint and one right-hand thread joint on each tie rod. This \"turnbuckle\" configuration allows you to adjust the rod length while it is still installed on the kart.\u003c\/p\u003e","brand":"Aurora","offers":[{"title":"Default Title","offer_id":52565401043262,"sku":"HJ516LH","price":8.91,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0962\/4721\/8494\/files\/516tierodsandends-hj516lh-5-16-left-hand-heim-hj516lh.jpg?v=1763116232"},{"product_id":"full-range-of-motion-washer-sold-each-frmw","title":"Full Range of Motion Washer for Tie Rod Ends","description":"\u003cp\u003eEliminate binding in your tie rod ends using this innovative full range of motion washer, sold individually for precise needs.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eM8 steel construction, compatible with 5\/16\" bolts.\u003c\/li\u003e\n\u003cli\u003e4.2mm height (.165\") for subtle spacing.\u003c\/li\u003e\n\u003cli\u003eTapers from 15.3mm OD to 10.7mm for smooth action.\u003c\/li\u003e\n\u003cli\u003e8mm ID (.316\") ensures clean fit.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eAs a radius rod washer, it permits full swivel, preventing lock-up that slows your kart in maneuvers. This leads to fluid handling, letting you attack apexes aggressively. Versatile across metric and imperial systems, it's a go-to for mixed fleets. Stock them to keep your pit kit versatile and organized. The design reduces wear on ends, extending part life. Feel the liberty in steering—looser yet controlled. SKU: FRMW.\u003c\/p\u003e\n\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eQ: Why should I use a full range of motion washer on my tie rod ends?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eA:\u003c\/strong\u003e Standard washers can cause tie rod ends to bind during extreme steering angles. This washer allows for a full swivel, preventing lock-up and ensuring smooth, fluid steering input when attacking apexes.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: Is this washer compatible with both metric and imperial hardware?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eA:\u003c\/strong\u003e Yes. With an 8mm ID (.316\"), it is designed to fit 5\/16\" bolts perfectly while maintaining compatibility with metric M8 systems, making it an ideal choice for mixed-fleet pit kits.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: How does this washer help extend the life of my steering components?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eA:\u003c\/strong\u003e By eliminating binding and mechanical stress during tight maneuvers, the washer reduces unnecessary wear and tear on the tie rod end bearings, helping them last longer under racing conditions.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: What are the physical dimensions of the washer?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eA:\u003c\/strong\u003e The washer has a height of 4.2mm (.165\") and tapers from a 15.3mm outer diameter to a 10.7mm base, providing a subtle yet effective spacer for your steering linkage.\u003c\/p\u003e\n\n\u003ch3\u003eRelated Products From Vendor\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/8mmtr275b-black-8mm-hex-tie-rod-only-8mmtr275b\"\u003eHigh-Performance Black 8mm Hex Tie Rod Tube 275mm\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/8mmtr270b-black-8mm-hex-tie-rod-only-8mmtr270b\"\u003eRobust Black 8mm Hex Tie Rod - 270mm for Enhanced Steering\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/40mm-axle-lock-collar-wide-black-lc40b-wide\"\u003eWide Black 40mm Axle Lock Collar with Shoulder and 8mm Keyslot\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/30mm-axle-lock-collar-lc30mm\"\u003ePrecision 30mm Axle Lock Collar for European-Style Kart Chassis\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/1-axle-lock-collar-lc1\"\u003e1 Inch Two-Piece Axle Lock Collar with Keyway for Kart Precision\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Swift Karting Supplies","offers":[{"title":"Default Title","offer_id":52565683863870,"sku":"FRMW","price":1.02,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0962\/4721\/8494\/files\/steeringhardware-full-range-of-motion-washer-sold-each-frmw.jpg?v=1763116317"},{"product_id":"jn516lh-5-16-left-hand-jam-nut-jn516lh","title":"5\/16 Inch Left Hand Jam Nut for Secure Kart Heim Joint Locking","description":"\u003cp\u003eLock in your adjustments with this compact 5\/16-inch left hand jam nut, countering the natural unthreading from steering forces.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrecision Machining:\u003c\/strong\u003e Fits snugly to maintain position without marring threads.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVibration Resistance:\u003c\/strong\u003e Keeps heim joints firm, avoiding mid-race tweaks.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eA small part with big impact, it preserves your setup's integrity for predictable control. Essential for any serious kart mechanic. SKU: JN516LH.\u003c\/p\u003e\n\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eQ: Why is a left-hand jam nut necessary for my kart steering?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eA:\u003c\/strong\u003e Steering linkages are subject to constant vibration and rotational forces. A left-hand jam nut is specifically designed to counter-thread against the heim joint, preventing it from loosening or \"backing off\" due to track vibrations, which ensures your steering geometry remains consistent throughout the race.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: How do I properly install this jam nut?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eA:\u003c\/strong\u003e Thread the jam nut onto your tie rod or steering link before attaching the heim joint. Once you have adjusted your steering to the desired length, tighten the jam nut firmly against the heim joint body using a wrench. This creates a locking effect that secures the position of the joint.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: Can I use this on any kart tie rod?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eA:\u003c\/strong\u003e This nut is designed for 5\/16-inch threaded rods. Please ensure your tie rod or steering link is specifically threaded for left-hand components, as it will not thread onto standard right-hand threaded rods.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: Should I use thread locker with this jam nut?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eA:\u003c\/strong\u003e While the jam nut is designed to hold the heim joint in place through mechanical tension, many kart mechanics choose to use a small amount of medium-strength thread locker as an extra precaution against extreme track vibrations.\u003c\/p\u003e\n\n\u003ch3\u003eRelated Products From Vendor\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/8mmtr275b-black-8mm-hex-tie-rod-only-8mmtr275b\"\u003eHigh-Performance Black 8mm Hex Tie Rod Tube 275mm\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/8mmtr270b-black-8mm-hex-tie-rod-only-8mmtr270b\"\u003eRobust Black 8mm Hex Tie Rod - 270mm for Enhanced Steering\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/dzus-fastener-kit-dp-466\"\u003eComplete Dzus Fastener Kit with 8 Each of Buttons, Springs, and Rivets\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Swift Karting Supplies","offers":[{"title":"Default Title","offer_id":52565684060478,"sku":"JN516LH","price":1.88,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0962\/4721\/8494\/files\/516tierodsandends-jn516lh-5-16-left-hand-jam-nut-jn516lh.jpg?v=1763116321"},{"product_id":"jn516rh-5-16-right-hand-jam-nut-jn516rh","title":"5\/16 Inch Right Hand Jam Nut for Kart Steering Thread Protection","description":"Don't let vibrations undo your hard work—use this 5\/16-inch right hand jam nut to firmly secure right-side threads.\u003cp\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eDurable Steel:\u003c\/b\u003e Withstands repeated tightening without stripping.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eEasy Application:\u003c\/b\u003e Hex shape for wrench-friendly installation.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eIt pairs with left hand nuts for complete steering lockdown, promoting stable handling. A must-have for pit efficiency. SKU: JN516RH.\u003c\/p\u003e\n\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eQ: Why do I need a jam nut for my kart steering?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eA:\u003c\/strong\u003e A jam nut is essential for locking your tie rod ends in place. Without it, vibrations from the track can cause your steering alignment to shift, leading to inconsistent handling and potential safety issues.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: How do I install this 5\/16-inch jam nut?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eA:\u003c\/strong\u003e Thread the jam nut onto the tie rod end before attaching it to the steering linkage. Once you have adjusted your steering geometry to the desired setting, tighten the jam nut firmly against the tie rod or steering component using a wrench to lock the position.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: Do I need both left-hand and right-hand nuts?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eA:\u003c\/strong\u003e Yes, most kart steering systems use a combination of left-hand and right-hand threaded tie rod ends to allow for easy length adjustments without removing the rod from the kart. Ensure you are matching the thread direction of your specific tie rod end.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: Is this nut compatible with all kart tie rods?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eA:\u003c\/strong\u003e This nut is designed for standard 5\/16-inch right-hand threads. Please verify the thread size and pitch of your existing tie rod ends before purchase to ensure a proper fit.\u003c\/p\u003e\n\n\u003ch3\u003eRelated Products From Vendor\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/8mmtr275b-black-8mm-hex-tie-rod-only-8mmtr275b\"\u003eHigh-Performance Black 8mm Hex Tie Rod Tube 275mm\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/8mmtr270b-black-8mm-hex-tie-rod-only-8mmtr270b\"\u003eRobust Black 8mm Hex Tie Rod - 270mm for Enhanced Steering\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/dzus-fastener-kit-dp-466\"\u003eComplete Dzus Fastener Kit with 8 Each of Buttons, Springs, and Rivets\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/euro-snap-clamp-set-jk2999\"\u003eAffordable Euro Snap Clamp Set Pair - CIK Alternative to KG Brand - Bumper Clamps BodyWork Front\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Swift Karting Supplies","offers":[{"title":"Default Title","offer_id":52566710747454,"sku":"JN516RH","price":1.88,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0962\/4721\/8494\/files\/516tierodsandends-jn516rh-5-16-right-hand-jam-nut-jn516rh.jpg?v=1763116638"},{"product_id":"hj516rh-5-16-right-hand-heim-joint","title":"5\/16\" Right Hand Heim Joint - 5\/16-24 Male Thread Kart Hardware HJ516RH","description":"\u003cp\u003eUpgrade your kart's steering or suspension linkages with this reliable 5\/16\" Right Hand Heim Joint, model HJ516RH. Featuring an industry standard 5\/16-24 right hand male thread, this heim provides smooth, precise adjustability in high-stress racing environments.\u003c\/p\u003e\u003cp\u003eHeim joints like this one are go-to components in karting for connecting rods, control arms, and other critical linkages. The right-hand threading allows for easy installation and fine-tuning, ensuring your setup stays tight through corners and straightaways. Built to handle the vibrations and forces of track use, it's a must-have for builders and racers maintaining peak performance.\u003c\/p\u003e\u003cp\u003eKey details include the exact 5\/16-24 thread spec, confirming compatibility with standard kart hardware setups. Whether refreshing your chassis or repairing after a hard session, this heim joint delivers the secure connection you need without compromise.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e5\/16\" bore size\u003c\/li\u003e\n\u003cli\u003eRight hand male thread\u003c\/li\u003e\n\u003cli\u003eIndustry standard 5\/16-24 threading\u003c\/li\u003e\n\u003cli\u003eRobust construction for kart applications\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eStock up on these essentials to keep your pit kit ready. Simple, effective, and true to spec—perfect for any kart shop.\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003ch4\u003eWhat is the thread specification?\u003c\/h4\u003e\u003cp\u003eIndustry standard 5\/16-24 right hand male thread.\u003c\/p\u003e\u003ch4\u003eWhat size is the heim joint?\u003c\/h4\u003e\u003cp\u003e5\/16\" right hand heim.\u003c\/p\u003e\u003ch4\u003eIs this for left or right hand threading?\u003c\/h4\u003e\u003cp\u003eSpecifically right hand thread.\u003c\/p\u003e\u003ch4\u003eWhat is it used for in karting?\u003c\/h4\u003e\u003cp\u003eCommonly used in steering linkages, suspension, and other adjustable connections.\u003c\/p\u003e","brand":"Swift Karting","offers":[{"title":"Default Title","offer_id":53244418392382,"sku":"HJ516RH","price":4.09,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0962\/4721\/8494\/files\/HJ516RH_-_5_16__Right_Hand_Heim.jpg?v=1774899965"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0962\/4721\/8494\/collections\/516tierodsandends-hj516lh-5-16-left-hand-heim-hj516lh.jpg?v=1788999558","url":"https:\/\/swiftkarting.com\/collections\/5-16-inch-kart-tie-rods-heim-ends-parts.oembed","provider":"Swift Karting","version":"1.0","type":"link"}